1975 Cadillac Eldorado Convertible Sable Black Black Leather Parade Boot Wht Top on 2040-cars

Auto blog

Hotter Cadillac CT5-V prototype spotted with a manual transmission

Fans of the old Cadillac CTS-V (and high-performance sedans in general) may have something to be excited about. A series of interior photos leaked Tuesday reveal that prototypes of the forthcoming higher-output variant of the CT5-V Sedan have been equipped with a manual gearbox. Exclusive: Photos show the wilder Cadillac CT5-V will have a manual transmissionhttps://t.co/Ta8hZ804eg — The Drive (@thedrive) March 10, 2020 Photos obtained by our friends at The Drive show a partially camouflaged CT5-V prototype with a full interior and what appears to be a manual gear selector. While the shifter and its boot are partially obscured by a plastic covering, it's obvious that the knob is not the same one paired with Cadillac's automatic gearboxes, such as the one featured in our expertly augmented photo above.  This is not the first time the potential for a stick-shift option in the new, higher-end "V" cars has been floated. Rumors suggesting that the as-yet-unnamed higher-output CT4-V and CT5-V models might be so-equipped (at least optionally) circulated late in 2019. This, in addition to significantly higher power outputs and revised suspensions will set them apart dramatically from the base CT4-V and CT5-V, which are intended to compete with the likes of the Audi "S" line of vehicles.  CT4-V spied View 40 Photos GM has been quite cagey when it comes to details about these new models. We know they'll follow in the footsteps of previous-generation "V" cars, which were aimed squarely at Europe's powerhouse sport sedans. The hotter CT5 variant is expected to employ the automaker's 6.2-liter supercharged V8, which made 640 horsepower in the now-dead CTS-V.  We reached out to Cadillac for comment and were told by a spokesperson, "The ultra-performance variants of our Cadillac CT5-V and CT4-Vs are still under development.  We will have more details to share in the next few weeks and the CT5-V and CT4-V ultra-performance versions will debut later this year. Until then, I can only confirm that these cars will build on V-SeriesÂ’ respected legacy." Hopefully, GM won't make us wait too much longer for official details of these new high-performance models, including what we should expect in terms of powertrain availability and launch timing. Stay tuned. Related Video:

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.

Trucks and tidbits from GM's earnings report

General Motors announced this morning that 2018 was a good year for it financially, thanks in large part to the company's performance in North America, which was predicated, according to the company, on "strong pricing, surging crossover sales, successful execution of the company's full-size truck launch, growth of GM Financial earnings, and disciplined cost control." GM reported full-year income of $8.1 billion and EBIT-adjusted income of $11.8 billion. Crossover sales in 2018 were 1,034,808, an increase of 7 percent compared to 2017 deliveries. Throw in the body-on-frame SUVs and the ute number is a total 1,295,700. But let's face it: It is the trucks that really matter. The Chevy Silverado and Colorado, the GMC Sierra and Canyon. Altogether, GM sold 973,463 pickups in the U.S. in 2018. Although Ford gets bragging rights for F-Series sales, GM gets to point out that it has a greater aggregate number. An important factor regarding the trucks and the reported income is that during the last quarter, more than 90 percent of the new 2019 trucks were crew cabs (which have a higher sticker), and at GMC more than 70 percent were Denali and AT4 models (which have even higher stickers). According to reporting by Bloomberg, GM's pickup trucks combine for $65 billion in annual revenue. Clearly when the 2018 sales of the Silverado — 585,581— dwarf the combined sales of both Buick (206,863) and Cadillac combined (154,702), pickups are what matter to the overall health of the company in a way that it is difficult to otherwise achieve. The "disciplined cost control" is something that is very much in the public eye right now, as the company is taking out thousands of its workers, and there is still the "unallocated" plant situation and other plants that will remain under capacity. The numbers in GM's earnings report probably made Unifor members' heads explode in consternation, coming fresh off their Super Bowl ad: " GM, you may have forgotten our generosity, but we'll never forget your greed." But there are a couple of curiosities in the full GM earnings release. One is that so far as its autonomous efforts go, it mentions only that (1) in the first quarter of 2018 Cruise introduced a production-ready autonomous vehicle, and (2) Cruise attracted $5 billion in external capital from SoftBank and Honda. Not a whole lot of love for autonomy. Good thing they have the trucks to fund the program, to say nothing of the external capital.