Low Mile - Loaded - Leather - Onstar - Power Windows And Locks - No Reserve! on 2040-cars

Auto blog

2014 Cadillac XTS gets 410-hp twin-turbo V6

General Motors told us so back in March, but it is now official: The twin-turbocharged 3.6-liter V6 announced for the 2014 Cadillac CTS will also join the options list for the 2014 Cadillac XTS. The LF3 engine puts out 410 horsepower and 369 pound-feet of torque in the XTS, however, which is 10 hp and 61 lb-ft down from its application in the CTS. It will be identifiable from the outside by a specific grille treatment and a badge on the decklid. The 3.6-liter V6 with 304 hp and 264 lb-ft holds steady as the standard engine, and both will be yoked to a six-speed automatic transmission with paddle shifters.
Also new for the front-wheel drive model for 2014 are updates that include electric power steering and optional Automatic Parking Assist that can maneuver the sedan into parallel parking spots. The three trims above standard - Luxury, Premium and Platinum - get Intellibeam headlights that automatically switch between high- and low-beam,
The four current trim levels remain but the list of optional extras for the higher specs grows with a rear-seat entertainment system equipped with DVD screens in the front seatbacks, memory settings for the front passenger seat and an armrest in the back seat fitted with radio and sunshade controls. The press release below has more info on all of the changes.

2020 Cadillac CT5 revealed, will replace the CTS

Between the end of most of Cadillac's sedan offerings and the launch of the underwhelming XT6 crossover, things were looking dreary at the American luxury brand. But now we get an exciting surprise in the reveal of the 2020 Cadillac CT5 sedan. It's a clean, and arguably conservative-looking sedan, but there are a number of things that have us intrigued. The sedan is clearly the CTS replacement, since the name falls just below the flagship CT6 sedan. Under the hood are two familiar Cadillac engines, a 2.0-liter turbocharged inline-4 and a twin-turbo 3.0-liter V6. Power numbers haven't been announced, but expect each to make similar power to the current CTS: 268 horsepower and 295 pound-feet of torque for the four-cylinder and 420 horsepower and 430 pound-feet of torque for the V6. Rear drive and all-wheel drive are available, and both engines get a 10-speed automatic transmission. The car also adopts the trim level scheme introduced by the XT4 and XT6 crossovers, which means there are just two choices, Sport and Luxury. The Sport model, pictured in gray, has a more aggressive front fascia and dark taillights, while the Luxury model, shown in burgundy, has a more demure appearance and classic red taillights. We only get a glimpse of the interior, and it shows the latest electronic gear shifter shared with Cadillac's recent crossovers, along with a physical knob for interacting with the infotainment system. Cadillac announced that the car will make its public debut at the New York Auto Show, and it will be built at the Grand River factory in Lansing, Mich. We expect to get more details and images of the car when it's revealed at the show.

Cadillac adds torque-number badging to most new models starting in 2020

Few phrases describe huge swaths of America better than a phrase spotted on the back of a top-fuel dragster at an NHRA event: "You can never have too much horsepower or ammunition." If Cadillac CEO and wily Canuck Steve Carlisle has his way, the revised phrase would substitute "torque measured in Newton-meters" for "horsepower." Starting with the 2020 model year, America's luxury brand will add torque figure badges to CT and XT models, beginning with the XT6. The badge above kinda almost sorta represents the torque produced by the luxury crossover's 3.6-liter V6. That badge did not appear on the XT6 we photographed at the Detroit Auto Show. In U.S. parlance, twist in the XT6 comes to 271 pound-feet. Translated to Newton-meters, that's 367 Nm. Then round that up to the nearest 50, which Cadillac will do, and one arrives at 400. True, the rounding prevents a future of number jumbles like the 2020 XT6 367 vs. the 2021 XT6 419T. Nevertheless, we don't know why Cadillac is rounding to the nearest 50 instead of the nearest 25, since 50 Nm is about 37 lb-ft and could conceal a decent torque increase between model years. A "T" denotes turbocharging, and we imagine there'll be designations for hybrids and electric cars. We think most modern attempts at engine-based nomenclatures soon get as complicated as ciphers or come unmoored from their original scheme. And based on our experience with The Average Car Buyer, they don't care. A bigger number, no matter what that number represents, means more, which is the important thing. Because America, right? Maybe not. Carlisle said, "We're not talking about displacements any more," and the new badging will give consumers "a clear understanding of the power differences across the lineup." The brand believes torque provides a better comparison between ICE, hybrid, and EV powertrains and "the balance between fuel economy and performance." As for the immigrant unit of measurement, Carlisle told CNET, " It's metric, it's universal, it's global, we have to think about all the markets that we're doing business in." Oh, and, "Engineers certainly prefer Newton-meters." The new nomenclature will not be applied to V-series models or the Escalade, because the CEO holds that "special cars get special names." We should probably take a moment to reassure the CT and XT models that Steve Carlisle thinks you're all special, too. Just a different kind of special.