2004 Cadillac Deville Base Sedan 4-door 4.6l on 2040-cars

Auto blog

2020 Cadillac CT4 spy shots reveal sedan-heavy approach in age of SUVs

You're looking at some pictures of the 2020 Cadillac CT4, which will be smaller than the upcoming CT5. And since they're both smothered in similar-looking camouflage, which is specifically intended to confuse, you might think they look pretty similar. In isolated photos, it's sometimes hard to tell which sedan you're looking at. In fact, when we first saw this car recently, we also thought it was a CT5. Here's how we know they're actually two different cars. Some background: The CT5 is slated to replace the CTS, and to try and find the balance that the old car couldn't achieve in the lineup. Cadillac's former CEO previously stated that this car would also fill in for the ATS, which is on its way out. Whatever it ends up being, it'll have to make a clear case for itself against the CT6 — it can't be too close in size and opulence, or they'll hurt each other in sales. And the CT5 can't be too small, or it will struggle against traditional midsize luxury cars. The CT4 could further complicate matters for the exact same reasons, just in a smaller package. How small can Cadillac make it? It seems poised to replace the wonderful-to-drive ATS, which was as allergic to sales as the XTS. This will give Cadillac a three-sedan lineup: CT4, CT5, and CT6. Let's hope there's enough differentiation between them to prevent consumer confusion and sales cannibalization — and that consumers understand the CT6's promotion via attrition to top dog in the sedan lineup. With all that out of the way, let's look more closely at the CT4 (above left) and CT5 (right). The CT4's greenhouse stops closer to the centerline of the rear wheels than the CT5's. That gives the CT5 a visually longer, leaner look, more of a semi-fastback arrangement. The CT5's rear vanity window should resemble the CT6's, with a glass element behind the door opening. The CT4 will have a more conventional vanity window in the door, like the ATS. Perhaps the quickest "tell" is the size of the side-view mirrors, which are rounder in the CT4 and leaner in the CT5. Out back, the CT4 has a lower cutout for the license plate than the CT5. The exhaust outlets are also different, although that may change for production. Remember, the big full-width rear lights are probably misdirection on the part of the GM camo team. The entire rear decklid of the CT4 has more roundedness to it, while the CT5's extra width gives it more room up top to spread the decklid out a little flatter.

eBay Find of the Day: Ryan Gosling Eldorado from Lost River

What's better than a car connected to Ryan Gosling? A car connected to Ryan Gosling and Matt Smith (the eleventh Doctor Who for our less nerdy readers). This 1966 Cadillac Eldorado convertible is driven by Smith in Lost River, Gosling's directorial debut. The movie was filmed in Detroit, with plenty of footage at the Packard factory, and the car is located in the nearby enclave of Hamtramck. Truth be told, this car has questionable star appeal and it needs a lot of work. Lost River currently holds a 20% fresh rating on Rotten Tomatoes. I've never seen an episode of any Doctor Who – a fact that amazes Seyth Miersma. And while I agree with Kroll Show character Wendell Shawn that Gosling is a "beautiful idiot," that's not enough for me to buy a car with an exhaust leak. The body on this Eldorado looks clean, but there is plenty of restoration work for the next owner. The listing states that most of the exterior and trim needs to be installed, and the front seats are in rough shape. Other details are vague – the carburetor "might need to be rebuilt" and the radiator and fan "may need to be replaced" but neither statements explain why. On the upside, the 340 horsepower (gross rating), 429 cubic inch V8 runs well. Reserve is not met at the current price of $4,000, but this could be a chance to get a classic '60's convertible for cheap. Featured Gallery eBay 1966 Cadilac Eldorado View 18 Photos News Source: eBay Celebrities TV/Movies Cadillac Auctions ebay Find of the Day celebrity ryan gosling

Why an independent rear suspension for GM's new, full-sized SUVs wasn't easy

A Motor Trend report last month laid out how Cadillac's 4.2-lier twin-turbo Blackwing V8 could be an orphan due to cost concerns in the GM empire. Last-minute chassis changes to Cadillac's new sedans and XT6 crossover led to engine bays that couldn't fit the Blackwing. On the SUV side, according to the report, the new independent rear suspension for big people haulers cost so much to implement that GM ruled out reworking the Escalade to accept the Blackwing. At least one commenter rightly asked how could a suspension swallow that much money. A new piece in Motor Trend has the answer. The excellent Alissa Priddle spoke to Tim Herrick, GM's executive chief engineer for full-size trucks, about why the clean-sheet IRS cost "multimillions of dollars."  First, GM would need to build a new body shop at the Arlington, Texas plant that assembles the automaker's big SUVs to stamp the numerous wholly new parts and panels accommodating an IRS. Then GM would need to design and pay for a new assembly process. On top of those up-front costs, there was the incremental cost of the four-link IRS components being more expensive than those in the trucks' former leaf-sprung solid axles. Herrick endured so many rejections for so long that he remembers the date and time when he got approval for the new unit. He said it came down to a meeting where he told a higher-up, "I'll make you a deal: If we get to the reveal, or if we launch this and you think this was a dumb idea, I'll hand you my badge and let you walk me out." Head to Motor Trend to read the full story. Based on Herrick being on stage to help present the new SUVs to the press, and on our First Ride in the new Chevrolet Tahoe and Suburban at GM's Milford Proving Grounds, it appears this will have a happy ending for all involved. Furthermore, since Herrick worked on the T1 platform that supports the big SUVs as well as the light- and heavy-duty pickups, he understood the demands on the commercial side, too. That could be why when Roadshow asked Tim Asoklis, chief engineer of the Tahoe and Suburban, if the new IRS could endure life in the Chevrolet Silverado and GMC Sierra, Asoklis answered, "Oh, absolutely." Related Video: