1990 Cadillac Deville V8 Low Miles Classic Collector Car on 2040-cars

Auto blog

All-new 2019 Cadillac XT4 crossover debuts in New York

Cadillac spent years and years improving its mainline sedans, the CTS and ATS, turning them into awfully good impressions of BMWs from a few years before. The thing is, great sedans aren't selling, and crossovers sure are. Cadillac's XT5 is the only crossover in the lineup, something that's had American Cadillac dealers gnashing their teeth and wailing — although anyone they can upsell into an Escalade can staunch the bleeding. That brings us to the new XT4, which is smaller than the XT5 but even sharper than its bigger sibling. Let's take a closer look at this new two-row luxury crossover. For one, it's based on what Cadillac calls a unique platform. That may be true, technically, although it's likely related to the Equinox/Terrain on some level. Platforms are becoming quite flexible: Look at Volkswagen's MQB, under everything from Euro hatches smaller than our Golf to the three-row Atlas. Whatever else it is underneath the skin, all XT4s will share one powertrain: the corporate 2.0-liter turbocharged inline-four, paired to a nine-speed automatic transmission. View 14 Photos The engine puts out a healthy 237 horsepower and 258 pound-feet of torque, putting it just a hair underneath its closest domestic rival, the Lincoln MKC with the 2.0-liter EcoBoost. Of course, the 2.3-liter MKC beats the XT4 handily, but that's another story. Power is produced with the help of a twin-scroll turbocharger. All-wheel drive is available, with a driver-selectable rear axle disconnect to save a small amount of rolling friction. Cadillac estimates it'll be good for 30 MPG on the freeway, but we haven't seen official results to confirm that. A few other changes that'll affect driving: electro-hydraulic brake assist, a first for Cadillac and mainly a fuel-saving measure; and Continuous Damping Control, which alters the damper's valve continuously based on a number of parameters. It's almost certainly used here because it's lighter and less expensive than air suspension or MagneRide, and it is optional on XT4. CDC or no, all XT4s utilize a front strut and five-link rear suspension. All XT4s also ride on 18-inch wheels in various designs. The trim strategy is mildly interesting. The base model is the Luxury, and then you can choose a Sport (black exterior trim, unique wheels) or a Premium Luxury (bright trim and satin-brushed accents). The interior options are suitably upscale and premium, and we'll have more to say about them a little later when we can see this car up close.

Cadillac's Blackwing V8 was the best engine at the worst time

It should be clear that GM knows how to innovate and engineer excellent products when it wants to. Cadillac's 4.2-liter twin-turbo Blackwing V8 is recent proof of that. Yet, as related in an extensive Road & Track piece, the Blackwing became victim to some of The General's bugbears, like the reticence to — for whatever reasons — unleash its excellence everywhere, fund that excellence, and be consistent with that excellence over the long term beyond the Corvette and full-sized pickups and SUVs. The R/T story relates tales told by "several people deeply involved with the Blackwing project" about how an engine 18 years in the making was deprived of its reasons for being in less than three. Starting around 2000, GM spent a dozen years building Cadillac up to the point where the American luxury brand could rationally flip to the chapter called, "Taking the Fight to the Germans, but for Real this Time." The first steps in the plan meant an exclusive platform and an exclusive engine. The platform was called Omega. You know the engine's name. They were going to be the aluminum-blocked fist and velvet glove enabling Cadillac to break on through to the other side of luxury — proper luxury to global standards, that is — with a range of beautiful and dynamic crossovers and sedans. An engineer involved in the project estimates GM poured $16 million into the Blackwing's clean-sheet development. Many more seven-figure sums went into creating the first sedan on the Omega platform, the CT6. The automaker dropped millions again poaching ex-Audi and Infiniti chief Johan de Nysschen, and moving Cadillac's headquarters to New York City in 2014. Further pallets of cash funded the development and debut of the Escala concept at Pebble Beach in 2016. In 2018, GM revealed its dramatically named DOHC twin-turbo V8. Considering what came before, the Blackwing clearly wasn't designed for cars. It was designed for world domination. However, against the backdrop of plummeting sedan sales, the CT6 didn't sell like GM had hoped. The automaker hesitated to marshal another fleet of Brinks trucks to fund entries into a cratering bodystyle. Removing sedans from the world domination equation created more difficult math for the crossovers and the Escala.

Super Cruise’s failsafes

Even though Super Cruise is not a fully autonomous system, it incorporates redundancies like those used in aircraft to ensure failsafe operation. Before taking off on a 700-mile, 11-hour test drive of the system — and putting my life in its hands without my hands on the wheel — I sat down with Daryl Wilson, lead development engineer for Super Cruise, to get a deep dive into the system and its critical safety backups. Autoblog: First, what makes Super Cruise different from similar systems? Wilson: The key differentiator for Super Cruise is hand-free driving. It's an industry first in that respect. Our competitors require the driver at minimum to place their hands on the wheel with some frequency to ensure that the car knows that the driver is there. We don't. Two key technologies allow us to do this. One is our Driver Attention System, which is our methodology for making sure the driver is engaged with the vehicle and engaged with the road. This is a driver assist system, not a fully autonomous system. So it requires driver engagement. We use an infrared camera that constantly monitors the driver's face to determine the direction they're looking. We're looking for the driver to be what we call on-road — not on the center stack, not to left or right or down. That's all done by the tracking of the face. We also track that the eyes are open. It's infrared because at night you need to illuminate the face and you can't be shining a light into the driver's face. Then we have our lidar mapping that provides a foundation for control and redundancy to ensure safe performance. Autoblog: How does the mapping act as a redundant feature? Wilson: This system is only for use on divided, controlled access highways. What I mean by a divided highway is something more than a painted line between you and oncoming traffic. Whether that's a grassy area in between the lanes or a concrete barrier, anything that separates you from oncoming traffic. That's the divided highway part. The controlled access part is entrance ramps and exit ramps. Not with roads that cross at grade, with traffic crossing at the same level. To do that we geofenced these roads to ensure that operation is only allowed in these conditions. We don't just recommend you use it there; we ensure that you only use it there.