1985 Cadillac Sedan Deville Calif Car on 2040-cars

Auto blog

Cadillac's 4.2-liter Blackwing V8 to die with the CT6?

Cadillac's 4.2-liter twin-turbo Blackwing V8 debuted only last year, popping up in the CT6 V-Sport — now the CT6-V — with 550 horsepower and 627 pound-feet of torque. The engine's been stymied in every attempt to power a different Cadillac model since then. Its only two use cases have been a first and second run of the original, limited-edition super sedan and the CT6 Platinum V8 trim at a slightly detuned 500 hp and 553 lb-ft. Motor Trend cites "a highly placed source at GM" as saying that the Blackwing won't go into the coming high-performance version of the CT5-V nor in the next-gen Escalade. Left without options, there's a chance the Blackwing will die with the CT6, itself a sedan with its grille on the executioner's block just waiting for the bite of an ax that might or might not shortly fall. Cost-cutting has been tagged as the reason for this misfortune; Cadillac's sales malaise and lack of clarity as to how to turn sales around led GM to downsize the brand's allowance. The parent company chose to build the new CT5 on the Alpha platform used for the erstwhile ATS and CTS instead of the Omega platform underpinning the CT6. Along with that choice, the MT report says expense reasons nixed fitting the Blacking V8. We know the lower-tier V series CT5 will work with a twin-turbo 3.0-liter V6 making 355 hp and 400 lb-ft. When we heard spy video of the upper-tier V series CT5 out testing, the engine sounded like the 6.2-liter supercharged V8 that would be a carryover from the last model.  The XT6, also rumored to get some V sauce, simply can't fit the V8. Instead of sitting on the Omega platform as once planned, the XT6 rides on the C1XX architecture under other GM products like the Buick Enclave and Chevrolet Traverse. The C1XX engine bay doesn't have room for a stouter V6, much less a hi-po V8. The next-gen Escalade ruled itself out due to price issues in back, not in front. MT writes that the independent rear suspension supporting GM's next-gen full-sized SUV quartet has burned through cash in development, putting engineers a few direct deposits short of the funds needed to massage Blackwing installation. Earlier this year at least one report said the twin-turbo DOHC V8 could serve the top-spec next-gen Escalade. More recent reports of a performance-heavy next-gen Escalade have predicted the 6.2-liter supercharged LT4 V8 from the Chevrolet Camaro ZL1 and Corvette Z06.

2020 Cadillac CT5 in New York: 7 questions with the chief engineer

Cadillac revealed the 2020 CT5 at the New York Auto Show, and we decided to sit down and have a chat with chief engineer Mike Bride to learn more about the car. You can read our reveal post here to get the full download, and then read on below to learn a bit more. Cadillac is still rather coy about any performance model to spawn from the CT5, but things appear to be looking up after our conversation that you can read below. Q: What's the driving nature of this car? Should we expect something similar to the CTS and ATS? A: Yes, you can see it's built off the rear-wheel-drive architecture. Our goal was to retain all of that fun-to-drive nature. Direct steering feel, responsive handling. Going forward, we ask how we can continuously improve, and that was really about driving more sophistication in the ride, a much more mannered car that's better for impact harshness and rolling isolation, really provides comfort when you want comfort over tire strips and heaves in the road. Really getting that level of isolation, but not compromising that handling and direct steering feel of the Cadillac sedans we've grown accustomed to. Q: How is this car different from the CTS underneath, and other Alpha platform cars? A: I would say this is a major revision. A lot of new parts, a lot of new part numbers, a significant evolution. In the suspension space, the links are all new, and there's been a lot of work done in isolation, so the bushings and strut mounts are all new. We've evolved the Alpha platform to now get the ride control and road isolation, the comfort aspects of it all. There are a lot of structural improvements like a changed wheelbase, an evolution in rear foot-swing and foot space from the fuel tank area to get in and out of the car better. As we developed this structure, it was about overall structural body stiffness, and impedance at the chassis attachments to really get that level of isolation from road inputs. We try to have a calm floor, a steering wheel that doesn't vibrate, and quiet to the driver's ear. Those were the paths we went after to really drive the structure to the right stiffness requirements, structural integrity, a lot of development into suspension bushings, tuning elements, strut mounts. We have a new damper technology, a ZF damper. It has MVS damper technology. It's a multi-valve system that provides less harshness from an NVH standpoint and a great optimization balance of motion control with ride inputs.

Cadillac CT6 V-Sport wants to take prisoners with 550-hp 4.2L TT V8

With the refresh of the Cadillac CT6 for 2019, Cadillac welcomes the first CT6 V-Sport as well as a new trim strategy. The changes at the front for the CT6 lineup don't appear substantial viewed head-on, one needs a side view to appreciate the greater three-dimensionality. Thinner headlights and a thinner bumper above a slightly larger lower front intake emphasize the mesh grille, and the vertical LED DRLs make more dramatic statements thanks to those narrower headlights. By angling the main units back toward the rear of the sedan, the CT6 now has a certified, sculpted snout. The rework appears to add substantial overhang, but overall length only increases by a tenth of an inch, to 204.1 inches. What's under the V-Sport's probing hood is just as interesting as the redesign and the sporting thrust: A clean-sheet design of a 4.2-liter DOHC twin-turbo V8. In the V-Sport, the engine produces 550 horsepower and a Bentley-esque 627 pound-feet of torque. As an optional engine elsewhere in the CT6 range, the same engine produces 500 hp and 553 lb-ft. The displacement, specs, plus the fact that "each engine will be hand-built at the Performance Build Center in Bowling Green, Kentucky" indicate this was one of the rumored powerplants for the mid-engine Corvette. The coming sports car was tipped to get a 4.2-liter and 5.5-liter DOHC twin-turbo V8. Based on the position of the turbos in this engine vs. their positions in the previous CAD drawings, we assume the drawings represented the 5.5-liter. (Note: Cadillac said Corvette will not get the new 4.2-liter twin-turbo engine.) The 4.2-liter item features an aluminum block, heads, and pistons, direct injection with a 9.8:1 compression ratio, cylinder deactivation, cylinder oil jets, and a variable-pressure oil system. The twin-scroll turbochargers capable of 20 pounds of boost sit in the 90-degree vee, working alongside twin water-to-air intercoolers, twin throttle bodies, and twin electric wastegates. Cadillac says 90 percent of torque arrives at 2,000 rpm and loiters through 5,200 rpm. Power gets sent through GM's 10L90 ten-speed automatic transmission and on to the standard all-wheel-drive system. Cadillac didn't list 0-to-60-mph times in its press release, but engineers have track-worthy alacrity in mind for the CT6 V-Sport.