1970 Cadillac Hearse on 2040-cars

Auto blog

Cadillac CT6 loses the entry-level 2.0-liter turbo four-cylinder

General Motors continues its engine rationalization among product lines. A few days after Chevrolet dropped the old-generation LTG 2.0-liter turbocharged four-cylinder from the Traverse, Cadillac has jettisoned the new-gen LSY 2.0-liter turbo four from the CT6 range. Given a look at the dealer ordering system, Cadillac Society said the 2.0-liter option shows "built out" or "no longer available," and the online configurator at the Cadillac site confirms the omission. The retired engine can be had in the XT4 crossover, rated at the same 237 horsepower and 258 pound-feet of torque. This means a couple of things for the big sedan. The CT6 entry price was $50,495 before destination, but fitted with the now-base 3.6-liter six-cylinder, the entry price has gone up to $55,495. The other change is that rear-wheel drive is no longer available; the three remaining engine choices come with all-wheel drive. Those engines are the NA 3.6-liter V6 with 335 hp and 284 lb-ft of torque, a 3.0-liter twin-turbo V6 with 404 hp and 400 lb-ft, and coming in a few months, the detuned 4.2-liter Blackwing twin-turbo V8 with 500 hp and 574 lb-ft, down from 550 hp and 627 lb-ft. Cadillac Society thinks one of the possibilities for making the move could be that GM is having a hard time meeting demand for the 2.0-liter. That might be, but we think no matter the reason, the result puts more logical pricing between the midsize CTS/CT5 and the full-size luxury flagship. We don't know how Cadillac will price the coming CT5, but there's now an $8,005 difference between the CTS and the CT6, instead of the $4,000 gap when the 2.0-liter was a CT6 option. Mercedes-Benz, for instance, puts a $12,000 gap between the C-Class and the E-Class, a $38,000 gulf between the E-Class and the S-Class. There's a $19,000 difference between an Audi A4 and A6, a $25,000 difference between an A6 and an A8. It isn't clear if this will affect every other market where the CT6 is sold. The Canadian, Mexican, and French Cadillac site configurators don't list the 2.0-liter turbo, but the Chinese Cadillac site does.

2020 Cadillac CT5 debuts at N.Y. Auto Show as a proper sport sedan

The 2019 Cadillac CT5 is here, and it's not a tweener sedan. After having done battle with the luxury sedan world through cars that were either too large or too small, Cadillac is using the CT5 to take direct aim at the BMW 3 Series, Audi A4, Alfa Romeo Giulia and Mercedes C-Class. Specifically, the CT5 replaces the CTS, but takes on vehicles one class smaller than what the CTS did. So, let's take a look at what Cadillac is bringing to the table. To begin, GM knows it has a winner on its hands with the Alpha platform used on the CTS and ATS and the Camaro, so engineers adapted it to the CT5. This seems like a great start, because we all happen to love the driving dynamics from vehicles on this chassis. The wheelbase is a couple inches longer than the CTS, but the CT5 is a couple inches shorter in overall length. As a result, the wheels get pushed toward the corners of the car, leaving the CT5 with relatively short overhangs in the front and rear. It looks different than both of the to-be-discontinued Cadillac sedans, but we wouldn't call it revolutionary. The rear end isn't quite a "sportback," but it's a "faster" shape, eschewing a traditional sedan's long decklid for a sloping-roof look instead. This shape does come at the expense of rear seat headroom, but we'll dive into the interior later. We got a little preview of the powertrain setup before this official reveal, but details were scarce. The base engine is the recently new 2.0-liter turbo four-cylinder found in the Cadillac XT4. Just as it did in that vehicle, this engine makes 237 horsepower and 258 pound-feet of torque. While it might be down on power compared to the old 2.0-liter in the ATS (272 horsepower and 295 pound-feet) we found it to be incredibly smooth, refined and not lacking in thrust compared to the old unit. We're sure the four-pot will offer sufficient power for the CT5, but the 3.0-liter twin-turbo V6 is lying in wait. This engine makes 335 horsepower and 400 pound-feet of torque. Both engines are paired to a 10-speed automatic transmission and can be had in rear-wheel drive or all-wheel drive in every configuration. So yes, you can get the V6 with rear-wheel drive, thankfully. Cylinder deactivation is also equipped to both these power units — the four-banger is able to run on two cylinders, while the V6 drops to four. Cadillac was entirely transparent about its new pumped-in engine sound strategy, too.

GM's redesigned full-size 2021 SUVs face delay over coronavirus

As General Motors works to conserve cash for the coronavirus pandemic, the automaker reportedly told suppliers that it is postponing development of several future vehicles. The situation may cause GM to delay the launch of the 2021 Cadillac Escalade, GMC Yukon, Chevrolet Tahoe and Chevrolet Suburban SUVs, which had been planned to roll out in April. The original launch plan for the redesigned full-size SUVs, which are some of the most profitable vehicles produced by GM, had called for production of the current models to end at its plant in Arlington, Texas, this week. After a retooling process, the redesigned SUVs were slated to begin production late in the month of April. In an email to suppliers viewed by Reuters and confirmed as authentic by GM, the automaker also said it was suspending development work on six future vehicle programs, including updates of the Chevrolet Equinox, GMC Terrain, Cadillac XT4, Bolt EV, Chevrolet Silverado and GMC Sierra. GM said preproduction work on those programs would be pushed back to calendar year 2021, with most of the updated vehicles scheduled to be launched as 2022 models. According to the Detroit News, work has also been paused on the Chevy Camaro and a future version of the Corvette that has yet to be unveiled and wasn't planned for production during the 2020 calendar year. Last week, the automaker told employees and suppliers it was delaying work on some future vehicles while pushing ahead with near-term models such as its redesigned full-size SUVs and the GMC Hummer EV, Cadillac Lyriq, Chevrolet Bolt EUV and Cruise Origin, as well as its new Ultium battery system. A GM spokesman who spoke with Reuters reiterated on Monday what the automaker had said last week — that the situation with its U.S. plants was "fluid" and that the automaker would "continue to evaluate" whether and when to reopen those plants on a week-by-week basis, with "employee safety" guiding that decision. GM said previously that it was closing most of its U.S. plants indefinitely. In its Monday email, GM asked suppliers to stop work on all pre-production tooling and pre-production parts manufacturing, but also not to dispose of any tooling or materials. GM told Reuters it had solicited volunteers from its workforce to finish the build-out of the current SUVs on a single shift in Arlington.