1964 Cadillac Coupe 2 Door Hardtop 429 Engine Runs But Needs Restoring Sbc on 2040-cars

Auto blog

Cadillac XT3 caught covered in copious camouflage

While a bit difficult to tell thanks to the impressive camouflage used, what we're looking at here is likely the upcoming Cadillac XT3. There are a few details that stand out to lend credence to this prediction. There are a handful of sharp angles scattered throughout that are in line with Cadillac's modern design language. Specifically in the LED running lights and on the side mirrors. The rear profile also is reminiscent of the current, and slightly larger XT5. The rear lights extend into the D-pillars, which would match the current Escalade. We get a pretty clear picture of the rear suspension on this XT3. It's clearly an independent rear suspension using coil springs. While General Motors uses independent suspension on some of its crossovers, we can't quite match it to a particular model. We believe that if the XT3 is based on an existing model (which it almost certainly is), the platform and suspension have been substantially modified. The XT3 could use a version of the D2XX platform that underpins the Buick Envision. However, we know from a previous report that the XT3 will likely be built at the factory that produces the Buick LaCrosse and Chevy Malibu. The XT5 uses a modified version of the LaCrosse/Malibu platform, so it's possible the XT3 could use a shorter version of the XT5 chassis. Depending on how small the XT3 ends up being, it might even share a platform with the Chevy Trax and Buick Encore. However, considering their economy car roots and torsion-bar rear suspension, we think that's the least likely. Regardless of what chassis is underneath its crisp bodywork, we expect the XT3 to be released sometime next year. Related Video:

Man trapped in Cadillac XLR for 14 hours after battery dies

A 75-year old Cleveland man ended up trapped in his 2006 Cadillac XLR for 14 hours last month, according to a story reported by the Detroit Free Press. The owner of the car, Peter Pyros, hopped into his roadster to back out onto his driveway, but he quickly learned that the battery was dead. He was "trapped" because the doors use an electric button to activate the door latch to open the door. Since the battery was dead, the buttons did nothing. Now, GM planned for an eventuality like this by placing a manual door release handle on the ground next to the seat. It's marked with a red diagram of the driver-side door opening. There's also a section about it in the owner's manual. The only problem here, was that Pyros says he didn't know the release was there, and he didn't have his owner's manual in the car. Because of this, Pyros may not have made it out alive if not for a neighbor coming to his rescue. "I came to the conclusion that I was going to die ... I was at peace with it. I asked God to help me twice, then I said, 'OK, God if this is the way I'm supposed to die, I will die,'" Pyros said to reporters. There's every chance he could have died in the car, too. Temperatures in Cleveland hit 77 degrees the day he was in the car, and he said it was unbearably hot and difficult to breathe after only 30 minutes sealed inside. Pyros reportedly tried yelling, pounding on and even trying to break the car's windows without success. At one point, Pyros wrote a note to his nephew explaining what happened if he ended up dying. What eventually saved him was a curious neighbor who came to investigate after he noticed his garage door was still open late at night. His neighbor called the police after he found him in the car, and emergency personnel actually ended up charging his car's battery up enough to get the electric door release to work. Of course, after everything settled down, there are now lawyers involved. They're going after GM, with an argument accusing the automaker of not making the emergency latch more obvious both in the car and in the owner's manual. GM doesn't appear to be having any of it. Here's its statement on the matter: "Because this varies by make and model, drivers should review the door lock section of their owner's manual, and follow up with their dealer or customer assistance center if they have any questions," GM spokesman Tom Wilkinson wrote to the Free Press. This type of door release isn't particularly uncommon for GM vehicles.

What if the mid-engine Corvette is really a Cadillac?

Call me crazy, but I'm not convinced the mid-engine Corvette is the next Corvette. The rumor is strong, yes. And, contrary to some of the comments on our site, Car and Driver - leader of the mid-engine Corvette speculation brigade - has a pretty good record predicting future models. But it's another comment that got me thinking: or maybe it's a Cadillac. There is clearly something mid-engine going on at GM, and I think it makes sense for the car to be a Cadillac. First off, check out how sweet the 2002 Cadillac Cien concept car still looks in the photo above. Second, there are too many holes in the mid-engine Corvette theory. There are too many holes in the mid-engine Corvette theory. The C7 is relatively young in Corvette years, starting production almost three years ago as a 2014 model. Showing a 2019 model at the 2018 North American International Auto Show would kill sales of a strong-selling car before its time. Not to mention it would only mean a short run for the Grand Sport, which was the best-selling version of the previous generation. More stuff doesn't add up. Mid-engine cars are, in general, more expensive. Moving the Vette upmarket leaves a void that the Camaro does not fill. There's not much overlap between Camaro and Corvette customers. Corvette owners are older and enjoy features like a big trunk that holds golf clubs. Mid-engine means less trunk space and alienating a happy, loyal buyer. Also, more than 60 years of history. The Corvette is an icon along the likes of the Porsche 911 and Ford Mustang. I'm not sure the car-buying public wants a Corvette that abandons all previous conventions. And big changes bring uncertainty - I don't think GM would make such a risky bet. Chevrolet could build a mid-engine ZR1, you might say, and keep the other Corvettes front-engine. Yes they could, and it would cost a ton of money. And they still need to fund development of that front-engine car. I highly doubt the corporate accountants would go for that. But a Cadillac? Totally. Cadillac is in the middle of a brand repositioning. GM is throwing money at this effort. A mid-engine halo car is the just the splash the brand needs to shake off the ghosts of Fleetwoods past. And it's already in Cadillac President Johan De Nysschen's playbook. He was in charge of Audi's North America arm when the R8 came out. A Caddy sports car priced above $100,000 isn't that unreasonable when you can already price a CTS-V in that range.