2011 Cadillac Dts Platinum 18k Miles White Diamond Stunner on 2040-cars

Auto blog

Cadillac CT6 loses the entry-level 2.0-liter turbo four-cylinder

General Motors continues its engine rationalization among product lines. A few days after Chevrolet dropped the old-generation LTG 2.0-liter turbocharged four-cylinder from the Traverse, Cadillac has jettisoned the new-gen LSY 2.0-liter turbo four from the CT6 range. Given a look at the dealer ordering system, Cadillac Society said the 2.0-liter option shows "built out" or "no longer available," and the online configurator at the Cadillac site confirms the omission. The retired engine can be had in the XT4 crossover, rated at the same 237 horsepower and 258 pound-feet of torque. This means a couple of things for the big sedan. The CT6 entry price was $50,495 before destination, but fitted with the now-base 3.6-liter six-cylinder, the entry price has gone up to $55,495. The other change is that rear-wheel drive is no longer available; the three remaining engine choices come with all-wheel drive. Those engines are the NA 3.6-liter V6 with 335 hp and 284 lb-ft of torque, a 3.0-liter twin-turbo V6 with 404 hp and 400 lb-ft, and coming in a few months, the detuned 4.2-liter Blackwing twin-turbo V8 with 500 hp and 574 lb-ft, down from 550 hp and 627 lb-ft. Cadillac Society thinks one of the possibilities for making the move could be that GM is having a hard time meeting demand for the 2.0-liter. That might be, but we think no matter the reason, the result puts more logical pricing between the midsize CTS/CT5 and the full-size luxury flagship. We don't know how Cadillac will price the coming CT5, but there's now an $8,005 difference between the CTS and the CT6, instead of the $4,000 gap when the 2.0-liter was a CT6 option. Mercedes-Benz, for instance, puts a $12,000 gap between the C-Class and the E-Class, a $38,000 gulf between the E-Class and the S-Class. There's a $19,000 difference between an Audi A4 and A6, a $25,000 difference between an A6 and an A8. It isn't clear if this will affect every other market where the CT6 is sold. The Canadian, Mexican, and French Cadillac site configurators don't list the 2.0-liter turbo, but the Chinese Cadillac site does.

Junkyard Gem: 1967 Cadillac Fleetwood Sixty Special Sedan

If you lived in North America in 1967 and you wanted to show the neighbors you'd clawed your way to the peak of the success pyramid, only one car would do: Cadillac Fleetwood. Today's Junkyard Gem is 4,685 pounds of General Motors luxury hardware, finally knocked off the road at age 53 by an unfortunate wreck and now residing in a Denver self-service wrecking yard. The Cadillac brand endured some rough years during the 1970s and 1980s, but rode high during the 1960s. The Fleetwood Sixty Special Sedan started at $6,423 in 1967, or just over $50,000 when figured using inflation-adjusted 2020 dollars. A Mercedes-Benz 250SE sedan set you back $6,385 that year, but it weighed barely half as much and packed just 148 horses against the Cad's 340. Really, you had to get a genuine Rolls-Royce to out-swank the Fleetwood-driving Joneses back then (the Lincoln Continental and Imperial didn't have quite the snob appeal at that time), and the Roller cost more than several Fleetwoods combined. This car has been around during its long life. On the windshield, we see 1980 and 1981 parking stickers from the Keeneland Club in Kentucky. This car was already 13 years old by that time, but still very classy. At some point, the car must have migrated to California. Here's a U.C. Berkeley sticker. This ancient In-N-Out sticker comes from the Southern California-only era of the famous hamburger chain. Sometimes it's tough to determine the reasons that an old car ended up in a place like this, but that's not a problem here. Let's hope the car's occupants had their belts on (lap belts only in 1967, but still better than nothing), because these old Detroit land yachts didn't have much in the way of energy-absorbing crumple zones. The paint and interior are quite rough, so this car depreciated from being worth perhaps a couple of grand to scrap value in an instant.  Cruise control was a very rare option in 1967, and this car has it. The famous Fleetwood triple-tone horns were still there when I got to this car. Under the hood, 429 cubic inches (7.0 liters) of super-smooth Cadillac pushrod V8. This engine grew to 472 and then 500 cubic inches during the following few years. The paint shows some great patina. Did I buy the horns? Of course I bought the horns — I always bring my trusty lightweight junkyard toolbox when I head out to shoot some Junkyard Gems. Related Video:

[UPDATE] Cadillac Blackwing gets ticket to Italy, to go to work in a supercar

UPDATE: It seems MAT's belief it had secured a supply of Cadillac's 4.2-liter Blackwing V8 was premature, and based on a handshake deal before GM sold its Turin engine center to Italy's Punch Group. Shortly after Hagerty ran the story, GM sent a statement to the outlet reading, in part, "We do not have an agreement in place with Manifattura Automobili Torino (MAT) to provide or sell the Blackwing engine. ... Our team is following up with MAT president Paolo Garella to discuss the misunderstanding." MAT also submitted a statement to Hagerty, saying, in part, "We thank GM for the clarification. Although a signed agreement was not finalized between the parties, we were under the impression that our counterpart was committing to making this engine available to MAT at conditions yet to be defined. ... We hope that this misunderstanding will not compromise our relations with GM and possible future collaborations." The original article follows: Some necessary cost-cutting at Cadillac led to switching the new CT4, CT5, and Escalade to older platforms. The revised architecture plan meant Cadillac's newest top-tier products couldn't fit Cadillac's newest top-tier engine, the 4.2-liter twin-turbo DOHC V8 known as Blackwing. That engine would serve limited duty at full power in the now-dead CT6-V, and at reduced output in the CT6 Platinum V8 trim before ending its bright, brief domestic life. But the story isn't over, the rebirth of Blackwing coming from a most surprising locale: Turin, Italy. Before the canceled Geneva Motor Show, Hagerty spoke to Paolo Garella, CEO of Manifattura Automobili Torino; that's the company better known as MAT, makers of the New Stratos and contract engineering house for boutique screamers like the Aspark Owl electric hypercar, Apollo Intensa Emozione, and SCG003C. Garella told the outlet, "We have an agreement with General Motors" for a supply of Blackwings, which would be developed and built at the General Motors Propulsion Engineering Center (PEC) in Turin. Since 2005, the PEC has been used to develop GM's global diesel engines and electronics. MAT's plan is to put the V8 into a new limited-run car MAT is creating from its own design. Then another surprising turn: Belgium-based global auto supplier Punch Group bought the PEC, with plans to work with GM on projects in progress until at least the end of 2021. Nothing changes as far as MAT is concerned, except perhaps a chance for an even closer collaboration with Punch Turin.