2006 Cadillac Dts Base Sedan 4-door 4.6l on 2040-cars

Auto blog

Super Cruise’s failsafes

Even though Super Cruise is not a fully autonomous system, it incorporates redundancies like those used in aircraft to ensure failsafe operation. Before taking off on a 700-mile, 11-hour test drive of the system — and putting my life in its hands without my hands on the wheel — I sat down with Daryl Wilson, lead development engineer for Super Cruise, to get a deep dive into the system and its critical safety backups. Autoblog: First, what makes Super Cruise different from similar systems? Wilson: The key differentiator for Super Cruise is hand-free driving. It's an industry first in that respect. Our competitors require the driver at minimum to place their hands on the wheel with some frequency to ensure that the car knows that the driver is there. We don't. Two key technologies allow us to do this. One is our Driver Attention System, which is our methodology for making sure the driver is engaged with the vehicle and engaged with the road. This is a driver assist system, not a fully autonomous system. So it requires driver engagement. We use an infrared camera that constantly monitors the driver's face to determine the direction they're looking. We're looking for the driver to be what we call on-road — not on the center stack, not to left or right or down. That's all done by the tracking of the face. We also track that the eyes are open. It's infrared because at night you need to illuminate the face and you can't be shining a light into the driver's face. Then we have our lidar mapping that provides a foundation for control and redundancy to ensure safe performance. Autoblog: How does the mapping act as a redundant feature? Wilson: This system is only for use on divided, controlled access highways. What I mean by a divided highway is something more than a painted line between you and oncoming traffic. Whether that's a grassy area in between the lanes or a concrete barrier, anything that separates you from oncoming traffic. That's the divided highway part. The controlled access part is entrance ramps and exit ramps. Not with roads that cross at grade, with traffic crossing at the same level. To do that we geofenced these roads to ensure that operation is only allowed in these conditions. We don't just recommend you use it there; we ensure that you only use it there.

Cadillac CTS-V, ATS-V special editions celebrate IMSA titles

This was Cadillac's first year of competition for its DPi-V.R. Daytona Prototype race car in the IMSA Endurance Championship, and it brought home both the manufacturer title and driver title. To celebrate the occasion, Cadillac has created special editions of its fastest road cars, the CTS-V and ATS-V, and their defining features are stickers. Yes, the most unique part of these special Cadillacs is a decal package. But it is an attractive one, with white, gray, silver and red accents inspired by the race car. They're complemented by either a black or white paint job and red side mirrors. The rear quarter windows also get little stickers of the race car's silhouette. Though the stickers are the defining trait of these special-edition cars, they aren't the only features. The CTS-V and ATS-V each come bundled with an array of other features such as a sunroof, the carbon fiber exterior accent package, and a red and black interior that features red-accented carbon fiber trim and Recaro seats. Available as additional options are an eight-speed automatic for the ATS-V, a performance data recorder and a suede steering wheel and shift knob. The other neat tidbit is that, if those extra features are must-haves, the IMSA edition ATS-V is the way to go. The $72,190 price for the sedan is almost $2,000 less than an equivalent standard ATS-V sedan. The regular ATS-V sedan also isn't available with the red and black interior. The special-edition ATS-V coupe starts at $74,390, which is a little over $1,000 more than an equivalent normal ATS-V coupe. Unfortunately for CTS-V buyers, the IMSA edition model, at $105,730, is pricier than optioning up a regular CTS-V. So in that case, you'll have to decide whether the decals and exclusivity are worth it. Related Video: Featured Gallery 2018 Cadillac CTS-V and ATS-V IMSA Championship special editions View 13 Photos Image Credit: Cadillac Cadillac Coupe Luxury Performance Sedan cadillac ats-v

2019 Cadillac CT6-V preorders start at $89,785

Cadillac's top-of-range sedan will start at less than $90,000, just barely. At the North American International Auto Show in Detroit, Cadillac announced it is opening preorders for the 2019 CT6-V, which will start at $89,785. Keeping things exclusive, Cadillac has 275 preorder slots available to the U.S. market for the CT6-V. It will briefly join the ATS-V and the CTS-V to give Caddy a trio of powerful sedans before the ATS-V and CTS-V bow out after the 2019 model year to make way for new models. Cadillac offers less powerful V-Sport variants, as well. The CT6-V, formerly the CT6 V-Sport, uses a Cadillac-exclusive powertrain. The twin-turbo 4.2-liter V8 makes a claimed 550 horsepower and 627 lb-ft of torque. This engine is hand-built and nicknamed the "Blackwing." It is linked to a 10-speed automatic transmission, which puts power to the ground through Cadillac's all-wheel-drive system. As an added luxury perk to buying the CT6-V, Cadillac will include 2 days at the V-Performance Academy at Spring Mountain. The trip is essentially all expenses paid, with tuition and luxury accommodation part of the package. Cadillac estimates the first CT6-V models to arrive in mid-2019. Now, it was widely reported that the Detroit-Hamtramck production facility that builds the CT6 would be among those closed by GM. Cadillac President Steve Carlisle told Automotive News, however, that the company is exploring production alternatives to keep the flagship luxury sedan for sale in the United States. Apparently, it was never actually on the chopping block, and instead, officials at the time of the plant closure announcement failed to mention that CT6 production would be moved rather than cancelled. Where that new facility would be has yet to be announced, but Carlisle told Automotive News that moving production to China, where the CT6 Plug-In Hybrid is built, is "the least-preferred option." Related Video: