2006 Cadillac Dts 94k Black On Black on 2040-cars

Auto blog

2020 Cadillac Escalade spied for the first time

Cadillac is expanding its crossover and SUV range with a new three-row XT6, but that doesn't mean it has forgotten about the one that started it all. As seen in the above photos, the company is testing a new version of the Cadillac Escalade. It's well-covered, but there are a number of details that we can make out. We'll get to what we can see of the design in a bit, but the big news is the suspension. Like the new Tahoe we previously spied, the 2020 Cadillac Escalade will have an independent rear suspension replacing the solid axle set-up that GM's full-size SUVs have always possessed. Its rivals from Ford/Lincoln went independent long ago. We can't underline enough how much of a difference this will make. Handling should be less cumbersome and the ride will be smoother and less prone to jiggling over bumps. It would be improved even further if Cadillac continues to offer magnetically controlled shocks as standard. Inside, the third-row should be positioned lower, thus lowering the current sky-high load height and resulting in a third-row that's actually habitable. In other words, the Escalade won't be so archaic. You can see the visual differences between the new (top) and current (bottom) designs below. Now, as for the design, our best clue to the new Escalade's design is in the grille. The flashy slatted chrome grille of the current model is gone and in its place a more modest mesh grille with little studs pushed to the front. It's very much like the grille found on the new CT6 and XT4. Also, like those two vehicles, the headlights appear to have more horizontal elements than the very vertical examples on the current Escalade. The rest of the SUV is harder to make out. The profile is very similar to the current one, and will surely be shared with the Chevy Tahoe and Suburban and GMC Yukon models. The rear features new rectangular exhaust tips nestled into the rear bumper. The taillights will likely continue to stretch up the rear pillars. Like the suspension, the Escalade will continue to be generally mechanically the same as the aforementioned Chevy and GMC versions, albeit with the best parts standard. The updated 6.2-liter V8 with Dynamic Fuel Management first introduced on the Silverado and Sierra will likely be the standard engine. It will then be paired with the 10-speed automatic transmission. With the new Navigator so widely impressing in reviews and in sales, this new Cadillac Escalade will have to step it up.

2023 Cadillac Lyriq production model revealed with range, power, price

We got our first look at the Cadillac Lyriq's design last August, and now the company is revealing the official production version of the electric crossover. The good news is that it looks almost identical to the preproduction version no matter where you look, inside or outside the car. It has the same long hood, low roof, creased body work, illuminated grille and groovy taillights. The interior retains the 33-inch instrument and infotainment screen and wood and metal trim. Only detail changes to things like the camera in the grille and the reworked control knob in the center console distinguish it from the concept. So if it basically looks the same, what's new here? Well, we finally have specifics on all the stuff that powers the concept-car body. At launch, the Lyriq will only be offered with a single motor and rear-wheel drive. The motor makes 340 horsepower and 325 pound-feet of torque funneled through a single-speed transmission. Supplying the motor with juice is a 100-kWh battery, though Cadillac didn't specify if that's the usable capacity or gross capacity. Cadillac estimates that the battery will provide more than 300 miles of range on a single charge. The initial models will be equipped with on-board charging equipment that can handle 19.2-kW Level 2 charging and 190-kW DC fast charging. The former can add 52 miles of range in an hour, and the latter can add 76 miles of range in 10 minutes and 195 miles in half an hour. Cadillac has made no mention of an 800-volt extra-fast DC charging system like in the GMC Hummer EV. There's a chance a system like that could be offered later, just like the forthcoming all-wheel-drive Lyriq variant. The Lyriq rides on multi-link independent suspension at all four corners, using "passive-plus" shocks, so it won't be adaptive or use GM's fancy magnetic suspension, at least at launch. Braking is provided by large 17-inch rotors at the front and 18-inch units at the back, welcome additions for the 5,610-pound crossover. Cadillac also gave us some basics on what equipment will be offered with the first run of Lyriqs. Only two colors, a silver and a black, will be available to begin with, and another silver will come a tad later. We imagine more colors will be offered on later Lyriq models. The interior comes in gray or black. Twenty-inch wheels are standard with 22-inch examples available as an option.

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.