2014 Cadillac Ats 2.5l Luxury on 2040-cars

Auto blog

Cadillac CT6 refresh has hints of Escala

Almost a year after Cadillac showed its stunning Escala concept at Pebble Beach, we're finally seeing some of that car's influence on production cars. These spy shots reveal that the CT6 will undergo a mild refresh, and despite the camouflage, we can make out details that show it will have looks more in line with the concept. One of the defining characteristics of the Escala were narrow, horizontal headlights, while the current CT6 has long, vertical lamps that go up the tops of the fenders. This prototype seems to split the difference. The bases of the lights terminate higher up on the fascia, emulating the Escala, but still travel up the fenders. It also appears that the LED accent lights remain, but it's possible they've been separated from the main lamps to become more like the concept. The grille has also been revised. It's hard to make out the exact shape, but the insert is the same type of mesh as the Escala's, with little highlights that look like miniature Cadillac crests. The full-size, full-color crest also appears to sit higher in the grille, which is another nod toward the concept. The lower grille in the front bumper also looks larger and more angular. That doesn't really lean toward either model, but should give the car an edgier look. The rest of the car looks generally the same as the current model. Even the tail shows little indication of changes. It's possible that the rear taillights could have an Escala-like horizontal section at the top of the trunk lid, but there's nothing visible on this prototype that would confirm that change either way. Since this is a relatively mild refresh, we would expect to see it fully revealed early next year. Related Video:

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.

Cadillac Blackwing models will finally be revealed in February

It's been a little over a year and a half since Cadillac reworked the V line of performance sedans and teased something above its regular V cars. In that time, we've seen camouflaged prototypes and a teaser for a manual shifter with a 3D-printed topper, but hardly anything about specifications. That should all change next month. The company released a teaser announcing the reveal of the Cadillac Blackwing variants of the CT4-V and CT5-V on Feb. 1. The teaser hardly shows anything of the cars except a brief shot of someone shifting, and what sounds like a fairly ferocious V8 exhaust note. Based on prototypes and rumors, we're expecting the CT5-V to use a supercharged 6.2-liter V8, rather than the unique DOHC turbocharged V8 from the CT6-V, and the CT4-V will likely have a turbocharged V6. The CT5-V has also been spied with quite a bit of tire, 305-mm in the rear and 275-mm in the front. Based on these car's similarly powered predecessors, the ATS-V and CTS-V, they should be extremely entertaining. Related Video: