2001 Cadillac Catera on 2040-cars

Auto blog

Junkyard Gem: 1993 Cadillac Allante

The General's Cadillac Division had lost much of its status as a world-class styling and engineering innovator by the 1980s, while younger rich Americans signed on the line which is dotted for European luxury machines packed full of futuristic technology. Something needed to be done to win back the hearts of those buyers, and that something was the Cadillac Allante two-seater. Here's a final-model-year Allante, complete with one of the very first Northstar V8 engines, found in a Denver yard. The overhead-valve Cadillac V8 engine of 1949 shook up the automotive world, and the double-overhead-cam Northstar V8 of 44 years later had a similar effect. Finally, a high-revving, smooth-running modern V8 to compete with those pesky European and Japanese carmakers! Only the Allante got the Northstar at first, with other Cadillac models following soon after. After the underwhelming power output of the pushrod HT4100 V8s used in the 1987-1992 Allantes, the upgrade from 200 horses to 290 helped boost sales of the '93 to the highest annual figure ever achieved by the model: 4,670 cars. Unfortunately for GM, production costs of the Allante proved to be murderous in the long run. Shortened Eldorado frames were loaded onto specially-fitted 747s in Detroit and flown to Pininfarina's new Allante factory in Italy. After Pininfarina built the bodies, they got loaded onto the 747s, flown back to Detroit, trucked to the Hamtramck assembly plant, and given running gear there. GM called this system the "Allante Air Bridge" and it cost plenty. The cars looked both futuristic and Italian, which they were, but the Allante's price tag stood at heights far above those of the rest of the Cadillac line: $59,975 in 1993, or about $108,500 in 2020 dollars. You could buy a rear-wheel-drive BMW 850Ci with a 282-horse V8 and manual transmission for a mere 10 grand over the Allante's cost that year, or a Jaguar XJS convertible for just $56,750. The Allante had front-wheel-drive and a not-so-modern four-speed automatic transmission, which hurt sales among the enthusiast types who flocked to Cadillac showrooms for the CTS-V a decade or so later. No European machine of 1993 could top the Mars Base appearance of these vertically-arranged, all-pushbutton HVAC/audio controls, though.

J.D. Power study sees new car dependability problems increase for first time since 1998

For the first time since 1998, J.D. Power and Associates says its data shows that the average number of problems per 100 cars has increased. The finding is the result of the firm's much-touted annual Vehicle Dependability Study, which charts incidents of problems in new vehicle purchases over three years from 41,000 respondents.
Looking at first-owner cars from the 2011 model year, the study found an average of 133 problems per 100 cars (PP100, for short), up 6 percent from 126 PP100 in last year's study, which covered 2010 model-year vehicles. Disturbingly, the bulk of the increase is being attributed to engine and transmission problems, with a 6 PP100 boost.
Interestingly, JDP notes that "the decline in quality is particularly acute for vehicles with four-cylinder engines, where problem levels increase by nearly 10 PP100." Its findings also noticed that large diesel engines also tended to be more problematic than most five- and six-cylinder engines.

Cadillac XT5, XT6, GMC Acadia recalled for two issues

General Motors is recalling three model years of the Cadillac XT5 and XT6, and the Cadillac's GMC sibling, the Acadia. The first recall has to do with the rearview camera. On 2020- and 2021-model-year XT5s, XT6s, and Acadias optioned with Surround Vision, insufficient crimping for the coaxial cables could cause a degraded signal from the rear camera, or cause the signal to fail. With all passenger vehicles required to have a working rearview camera, that's not an ideal situation. Only crossovers with Surround Vision are affected. The population at issue counts 95,231 vehicles, build dates being: XT5s produced from May 1, 2019 to June 23, 2021 XT6s built from February 25, 2019 to June 24, 2021 Acadias built from May 6, 2019 to June 24, 2021  The automaker hasn't been informed of any crashes or injuries related to the problem, and will begin mailing letters notifying owners of the issue on November 7. The fix is a trip to the dealer to have the cables inspected and replaced if necessary. Concerned customers can contact Cadillac customer service at 800-458-8006 or GMC customer service at 1-800-462-8782, then refer to GM's recall number, N222378380. Alternatively, they can get in touch with the National Highway Traffic Safety Administration (NHTSA) Safety Hotline at 888-327-4236 (TTY 800-424-9153), or go to www.nhtsa.gov, and refer to campaign number 22V709000. Another recall concerns just the 2023 Cadillac XT5 and XT6 and 2023 GMC Acadia units that were built on August 9, 2022. That day, a printer in the Spring Hill, Tennessee, Assembly Plant malfunctioned, producing vehicle labels for the driver's side B-pillar with illegible tire size information. That's a violation of a subsection of Federal Motor Vehicle Safety Standard No. 110. Only 24 units are affected, the fix being a jaunt to the dealer for a label with readable information. Owners who don't want to wait until November for letters from GM can contact Cadillac customer service at 800-458-8006 or GMC customer service at 800-462-8782, and mention recall number N222381690. Or they can head to the NHTSA Safety Hotline at 888-327-4236 (TTY 800-424-9153), or www.nhtsa.gov, and refer to campaign number 22V708000.