2014 Cadillac Cts Performance on 2040-cars

Auto blog

GM removes start/stop from full-size trucks and SUVs with V8 engines

GM is removing start/stop technology from a number of its popular full-size SUVs due to the ongoing chip shortage. This follows the removal of cylinder deactivation technology from some of its trucks, which was also due to the chip shortage. GM Authority first reported the news, but we’ve just confirmed everything with a GM spokesperson.  The following 2021 model year vehicles will be affected: Chevy Tahoe, Chevy Suburban, GMC Yukon, Cadillac Escalade, Chevrolet Silverado 1500 and GMC Sierra 1500. Only versions of those vehicles built with the 5.3-liter V8 or 6.2-liter V8 and mated to the 10-speed automatic will have the tech removed from them. Only vehicles manufactured on or after June 7 will be affected. “By taking this measure, it will enable us to continue production of our high-demand full-size SUV and pickups as the industry continues to rebound and strengthen,” GM said in a statement. Those who ultimately buy one of these vehicles without start/stop technology will receive a $50 discount off MSRP for their troubles. Losing this fuel-saving tech could be a big negative for some, but we know many folks turn it off anyway. Not having to press the button to deactivate start/stop every time could actually be a positive if youÂ’re part of the camp who does that already. 2021 Cadillac Escalade Sport Platinum View 27 Photos On the downside, GM says “most of the affected vehicles will experience a minor reduction in fuel economy.” We donÂ’t have revised window stickers in hand to know how each model will be affected, but any 1 mpg reduction will be rather impactful for vehicles rated as low as these trucks already are. Any reduction will be seen in the city mpg rating, so take the kind of driving youÂ’re going to be doing into account before purchasing. When it comes to greenhouse gas compliance rules, GM says it doesnÂ’t foresee this impacting the companyÂ’s average fleet score. It also intends to begin adding start/stop back to these models as soon as possible, but there will be no retrofit effort made to fit the tech to vehicles already built without it. “Our supply chain organization continues to make strides working with our supply base to mitigate the near-term impacts of the semiconductor situation,” GMÂ’s statement reads. “GM continues to leverage every available semiconductor to build and ship our most popular and in-demand products, including our highly profitable full-size trucks and SUVs for our customers.

Cadillac XT3 caught covered in copious camouflage

While a bit difficult to tell thanks to the impressive camouflage used, what we're looking at here is likely the upcoming Cadillac XT3. There are a few details that stand out to lend credence to this prediction. There are a handful of sharp angles scattered throughout that are in line with Cadillac's modern design language. Specifically in the LED running lights and on the side mirrors. The rear profile also is reminiscent of the current, and slightly larger XT5. The rear lights extend into the D-pillars, which would match the current Escalade. We get a pretty clear picture of the rear suspension on this XT3. It's clearly an independent rear suspension using coil springs. While General Motors uses independent suspension on some of its crossovers, we can't quite match it to a particular model. We believe that if the XT3 is based on an existing model (which it almost certainly is), the platform and suspension have been substantially modified. The XT3 could use a version of the D2XX platform that underpins the Buick Envision. However, we know from a previous report that the XT3 will likely be built at the factory that produces the Buick LaCrosse and Chevy Malibu. The XT5 uses a modified version of the LaCrosse/Malibu platform, so it's possible the XT3 could use a shorter version of the XT5 chassis. Depending on how small the XT3 ends up being, it might even share a platform with the Chevy Trax and Buick Encore. However, considering their economy car roots and torsion-bar rear suspension, we think that's the least likely. Regardless of what chassis is underneath its crisp bodywork, we expect the XT3 to be released sometime next year. Related Video:

Cadillac is building an LMDh car, will compete in WEC and Le Mans

Cadillac returned to sports car racing back in 2017 with its DPi race car, and it has had a successful run with it. It won four Rolex 24 Hour races at Daytona from 2017 to 2020, and took home two championships. So it's not totally surprising that it will continue running in the IMSA series with a new LMDh-class car. But that also means that Cadillac can, and will, race in the World Endurance Championship series, which includes the 24 Hours of Le Mans. This is because LMDh is a class that will be legal in both IMSA and WEC racing, as will the LMH hypercar class. So Cadillac will be taking on hypercars from Toyota, Peugeot and Glickenhaus. Audi and Porsche have announced plans to run LMDh racecars as well, so it will be a crowded field. There have even been rumors of a Dodge-badged version of the Peugeot 9x8 LMH car as well as a Lamborghini LMDh entry. Per LMDh rules, the car will feature a spec chassis and hybrid unit, but the engine and bodywork will be unique to the Cadillac. Unlike LMH, there are no requirements to build road-going versions, so we sadly won't see a wild mid-engine Cadillac hybrid supercar on the streets (unless Cadillac just decides to build one; don't hold your breath). But we'll still be excited to see another American manufacturer compete for an overall win at Le Mans. Cadillac will team up with Dallara, Chip Ganassi Racing and Action Express Racing for vehicle development and competition. The car will make its racing debut at the 2023 Rolex 24 at Daytona in January of that year. All we have to go on for the car's looks is the rendering at the top, which suggests a seriously angular shape. It will also be called the LMDh-V.R, similar to the current DPi-V.R racecar. Related Video: