2014 Cadillac Cts 2.0l Turbo on 2040-cars

Auto blog

New Takata problem results in recall of 414 GM vehicles

An airbag-inflator rupture discovered by Takata during testing has resulted in a new recall affecting 414 vehicles from General Motors, including 395 of them in the US. This latest campaign covers 2015 model-year examples of the Buick LaCrosse, Cadillac XTS, Chevrolet Camaro, Equinox, Malibu, and GMC Terrain. There are no reported breaks in any of these vehicles on the road, and the company estimates only one percent of them actually have the faulty parts. According to documents submitted to the National Highway Traffic Safety Administration (as a PDF), one side-airbag inflator failed a cold test at -40 Fahrenheit "releasing high pressure gas and propelling the separated components apart." The supplier told GM about the failure the next day. In these vehicles, the safety device might not only burst but the bag could inflate incorrectly, as well. GM and Takata say that a cause is not yet known, but they are "conducting an investigation." GM will begin notifying affected owners via overnight mail on Oct. 19. Dealers will replace the side airbag modules on all of the affected vehicles with new components outside of the suspect lot. All of the removed parts will also be collected for further study. Takata's faulty front airbag inflators have resulted in a serious scandal for the supplier. Initial figures indicated 34 million US vehicles are need of repair, though more recent figures have knocked that down to 23.4 million bad parts in 19.2 million automobiles. GM was already among the dozen automakers with models to fix, and some of its pickups were affected, along with the Saab 9-2X and Pontiac Vibe. GM Statement: General Motors is recalling 395 cars and crossovers in the U.S. because one of the front seat side air bags inflators may be defective. In the event of a deployment, the air bag's inflator may rupture and the air bag may not properly inflate. The rupture could cause metal fragments to strike the vehicle occupants, potentially resulting in serious injury or death. GM is unaware of any incidents involving vehicles with these components, which were part of a lot in which one inflator failed acceptance testing at the supplier. Dealers will replace the side air bag module or modules in affected vehicles. Including Canada, Mexico and exports, the total population of the recall is 414, GM estimates 1 percent of the recalled vehicles may have the defect.

Three automotive tech trends to watch in 2018 and beyond

Every year, technology plays a bigger and bigger role in the auto industry. To put things in perspective, 10 years ago iPod integration and Bluetooth were cutting-edge in-car innovations, and smartphones and apps weren't yet a thing since the first iPhone was only about six months old. And I can't recall anyone talking about autonomous cars. Compare that to today, with mainstream coverage of the auto industry dominated by autonomous technology, along with electrification and almost every move made by Tesla. These three topics were the most significant trends of car tech in 2017 and I believe they will continue to shape the auto industry in 2018 and beyond. Let's examine them. Full Autonomy Gets Closer to Reality While there were many developments this year that indicate we're inching closer to fully autonomous vehicles, I was behind the wheel for hours to witness one of them. In October I had the chance to test Cadillac Super Cruise on a 700-mile, 11-hour drive from Dallas to Santa Fe – and had my hands on the wheel for maybe 45 minutes max throughout the entire trip. Super Cruise is far from making the Cadillac CT6 or any GM vehicle fully autonomous, and has limitations such as functioning only on pre-mapped main highways. While it simply adds a layer of lane centering to adaptive cruise control, the technology will go a long way in making mainstream drivers more comfortable with letting machines take over. On a separate front, GM is pushing ahead with fully autonomous vehicles and announced last month that it plans to launch of fleets of self-driving robo-taxis in several urban areas in 2019. While most automakers are also in the race to make autonomous cars a reality, GM's turbocharging of its efforts appeared to be in response to Waymo, which announced just weeks earlier that its Early Rider Program in the Phoenix area would go completely driverless. The Early Rider Program launched last April, offering the public a chance to ride in Waymo's autonomous Chrysler Pacifica minivans. In this new phase of testing, Waymo is using its own employees as guinea pigs instead of the public while the vehicles operate without a human behind the wheel, and takes another giant step forward for fully autonomous driving.

Cadillac confirms Blackwings will get manual transmissions and 3D-printed parts

Cadillac's upcoming 2022 CT4-V and CT5-V Blackwing will be the first GM production cars to utilize 3D-printed technology. In fact, the technology will be featured front and center on one of the cars' most hotly anticipated features — in a decorative medallion atop the shift knob of the manual transmission. Cadillac says that "additive manufacturing" (named as such because 3D printing accumulates tiny deposits of material to create the object) made the manual transmissions possible by reducing costs and waste. Aside from the medallion, the cars will employ two 3D-printed two HVAC ducts and an electrical harness bracket. "[The manual transmission is] something we know V-Series buyers want and itÂ’s something we knew we had to have, so we used innovative processes to make it happen,” said Cadillac performance variant manager Mirza Grebovic. Speaking of which, Cadillac commissioned a Harris Poll survey about manual transmissions and received some interesting results. For example, 66 percent of American adults surveyed know how to drive manual, and 55 percent said they've owned a standard shift car. Of those who don't, roughly 40 percent are either somewhat or very interested in learning. Interest is highest among two key demographics, 64 percent of those earning $75,000 or more in annual household income, and 62 percent of those ages 18-34. The findings seem to contradict what many automakers have said about lack of interest in manuals, with some declaring a sub-1 percent take rate when manuals are offered. Perhaps with a performance-oriented car such as the V-series, buyer preferences change. The mix of old school gearboxes and new school manufacturing techniques will result in what looks like a very potent car on paper. The CT5-V Blackwing is rumored to be powered by an updated 6.2-litter V8, while the CTS-4 Blackwing is said to be motivated by a turbo six. Neither will use the twin-turbo 4.2-liter V8 of their namesake, but they should prove to be worthy successors to the CTS-V and ATS-V. Related Video: