2013 Cts-v Coupe, 6.2l Supercharged, Blind Spot Assist,7k Miles,1.49% Financing on 2040-cars

Auto blog

Canada opens probe into 250,000 GM pickups, SUVs over brake performance

Transport Canada, the auto safety regulator, has opened a probe into braking issues in nearly 250,000 General Motors full-size pickups and SUVs after U.S. officials launched a similar probe last year, the agency said on its website. The U.S. National Highway Traffic Safety Administration (NHTSA) in November into 2.73 million U.S. 2014-2016 model year SUVs and pickups after receiving 487 reports of hard brake pedal effort accompanied by extended stopping distance that were attributed to deterioration of the engine-driven brake assist vacuum pump. Transport Canada's probe covers 249,700 2015 through 2017 model year vehicles including the Cadillac Escalade, Chevrolet Suburban, Chevrolet Tahoe and GMC Yukon as well as 2014-2017 Chevrolet Silverado LD and GMC Sierra LD vehicles. The U.S. agency said it had reports of nine incidents of vehicles incurring damage as a result of colliding with another vehicle or fixed object at low speeds and reports of two injuries. NHTSA said if the pump fails to operate, the amount of brake power assist can be significantly reduced, extending vehicle stopping distance. The NHTSA sent GM an information request in a Feb. 7 letter. A GM spokesman said he had no update on the investigation. Reporting by David Shepardson; editing by Jonathan Oatis

Cadillac XT6 three-row crossover spied hours after de Nysschen ousted

Big news today from GM's luxury brand. Cadillac ousted Johan de Nysschen after four years at the helm. It's unclear exactly what let to his departure, but slumping sales and a lack of crossovers surely influenced GM's decision. Cadillac currently has one crossover and one SUV on sale. The Cadillac XT5 and Escalade will soon be joined by the smaller XT4. New spy shots show that the new three-row Cadillac XT6 will soon join the lineup. The new model is heavily camouflaged, but it's not difficult to make out Cadillac's corporate grille behind the covers. This still looks like a prototype car as both the headlights and taillights look like temporary units. The lower grille looks like it's hiding a radar sensor that's likely paired with the camera mounted in the windshield. The XT6 is likely to get Cadillac Super Cruise at some point. The XT6 looks longer than the midsize XT5 and should be roughly the size of the second-gen GMC Acadia. This should offer a more fuel-efficient alternative to the Escalade while still providing room for seven passengers. Look for a full debut this fall. Related Video:

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging