2011 Cadillac Cts4 3.0 Performance Sedan Awd Auto 28k!! Texas Direct Auto on 2040-cars

Auto blog

Genesis wins J.D. Power Tech Experience Study for third straight time

The results are out for the J.D. Power 2023 U.S. Tech Experience Index (TXI) Study, which "focuses on the user experience with advanced vehicle technology as it first comes to market and is an early measure of problems encountered by vehicle owners." Its measurement metric is problems per 100 vehicles (PP100), same as with the J.D. Power Initial Quality Study (IQS). The takeaway this year isn't that owners aren't using advanced technologies, as was the case with the 2022 study, or that they're having more problems with them overall. It's that owners of battery-electric vehicles are having more problems with advanced tech than owners of ICE-powered vehicles. According to the study, 17 of 21 features that can be had on both propulsion types — such as remote parking assistance and gesture controls — get lower satisfaction ratings by owners of BEVs, in some cases nearly 20 PP100.  The survey organization says this tracks with what its found in the IQS, where total vehicle problems were "46% higher among BEVs (excluding Tesla) than ICE vehicles and satisfaction is lower among owners of BEVs across nine of 10 APEAL categories than among owners of ICE vehicles." Findings regarding biometric measurements are among those that go against the overall study findings. Whether a fingerprint reader or an eye tracker, car owners in general said "they do not consider them to be useful." In terms of ease-of-use and satisfaction, plug-and-charge capability on EVs gets good marks. This allows EV owners to plug into a public charger and have payment taken care of automatically; the vehicle communicates with any charging station compatible with an automaker's plug-and-play system, so the vehicle can automatically submit a bill for the charging session to a central owner account with no further action needed at the station. Survey respondents noted a mere 6 PP100 and an 88.9% satisfaction.    Among manufacturers, repeat winners took the top prizes. Genesis earned the highest rank for innovation overall and among premium brands for the third straight year. Hyundai not only won the tech innovation banner for mass market brands for the fourth straight year, ahead of Kia, GMC, Ram and Subaru, Hyundai finished in second in the overall standings. On that overall chart, the top five are Genesis, Hyundai, Cadillac, Lexus and BMW. On the premium chart, Genesis is followed by Cadillac, Lexus, BMW and Mercedes-Benz in the top five. It wasn't close from the first to the rest, though.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

2019 Cadillac CT6-V preorders start at $89,785

Cadillac's top-of-range sedan will start at less than $90,000, just barely. At the North American International Auto Show in Detroit, Cadillac announced it is opening preorders for the 2019 CT6-V, which will start at $89,785. Keeping things exclusive, Cadillac has 275 preorder slots available to the U.S. market for the CT6-V. It will briefly join the ATS-V and the CTS-V to give Caddy a trio of powerful sedans before the ATS-V and CTS-V bow out after the 2019 model year to make way for new models. Cadillac offers less powerful V-Sport variants, as well. The CT6-V, formerly the CT6 V-Sport, uses a Cadillac-exclusive powertrain. The twin-turbo 4.2-liter V8 makes a claimed 550 horsepower and 627 lb-ft of torque. This engine is hand-built and nicknamed the "Blackwing." It is linked to a 10-speed automatic transmission, which puts power to the ground through Cadillac's all-wheel-drive system. As an added luxury perk to buying the CT6-V, Cadillac will include 2 days at the V-Performance Academy at Spring Mountain. The trip is essentially all expenses paid, with tuition and luxury accommodation part of the package. Cadillac estimates the first CT6-V models to arrive in mid-2019. Now, it was widely reported that the Detroit-Hamtramck production facility that builds the CT6 would be among those closed by GM. Cadillac President Steve Carlisle told Automotive News, however, that the company is exploring production alternatives to keep the flagship luxury sedan for sale in the United States. Apparently, it was never actually on the chopping block, and instead, officials at the time of the plant closure announcement failed to mention that CT6 production would be moved rather than cancelled. Where that new facility would be has yet to be announced, but Carlisle told Automotive News that moving production to China, where the CT6 Plug-In Hybrid is built, is "the least-preferred option." Related Video: