2011 Cadillac Cts White/black! on 2040-cars

Auto blog

How Cadillac improved power output in 2016 ELR by 25 percent

Earlier this year, Cadillac announced that the 2016 ELR would come with a big price drop and a powertrain that packs 25 percent more power output. That's a lot more oomph, but it didn't sound like the Caddy engineers made any major changes to the engine or motors. So, what happened? Let's refresh our memories with the numeric details. The 2016 car is 1.5 seconds quicker to 60 miles per hour than the 2014 model (there was no 2015), down to 6.4 seconds. The 2014 put out 295 pound-feet of torque. For 2016, it will be 373 lb-ft. The specific breakdown of the various components in the powertrain has not been disclosed, but from what we can tell, the two electric motors and the 1.4-liter inline-four engine in the new ELR are not that much different than those in the old one. Sam Abuelsamid, senior research analyst at Navigant Research (and former writer here at Autoblog) said that any of the unspecified upgrades would be difficult to tell on a part-by-part basis, but the overall effect will be noticeable. "The changes to the ELR as I understand them are analogous to getting more performance out of a 1965 Mustang with the entry version of the 289 cubic-inch V8. You can replace the carburetor with a larger version that enables more air and fuel to flow into the engine, thus producing more power. The basic engine hasn't changed, but power capability is being unleashed by feeding it more." "Cadillac has changed components in the power electronics to enable more current flow into the motor and thus produce more torque. When you do this in the Mustang, you probably need to replace the rear axle gears and use a beefier clutch to transmit the power to the wheels. Similarly, the ELR probably has some upgraded clutches, bearings, and gears to withstand the increased total output." Cadillac spokesperson David Caldwell told AutoblogGreen in an email that the new ELR does indeed have more than just new lines of code. "One could not 'reflash' a previous ELR to get the performance of a 2016," Caldwell said. "If one only changed software you would not get the performance upgrade fully, as the 2016 creates higher current, more power. So these have been upgraded physically – hardware.

Junkyard Gem: 1981 Cadillac Eldorado with V8-6-4 engine

Skyrocketing fuel prices caused by geopolitical events in 1973 and 1979 led to gas lines, federal fuel economy requirements, and an increasing reluctance on the part of American car shoppers to buy big, thirsty Detroit luxury machines. General Motors had pulled off some amazing technological feats in the past — the small-block Chevrolet V8 engine and Hydramatic transmission being two extraordinarily successful ones — and so Cadillac's bosses figured that a combination of computer wizardry and clever mechanical engineering would give the 368-cubic-inch Cadillac V8 a cylinder-deactivation system and resulting superior fuel economy. Here's a very rare example of one of those 1981 Cadillacs, found in a California self-service wrecking yard. The idea behind the V8-6-4 was that computer-controlled solenoids would physically disengage the rocker arms for one or two cylinders on each engine bank under low-load conditions, converting the engine from a 368-cube V8 to a 276ci V6 or 184ci V4 (that's 6.0, 4.5 or 3.0 liters, respectively, for the metric-system aficionados among us). This sort of variable-displacement magic is commonplace today, but it was science-fiction stuff in 1981. An "MPG Sentinel" display on the dash would let the driver know how many cylinders were active at the moment, and the car would get Chevy Citation fuel economy with Cadillac luxury. The V8-6-4 was the standard engine in all 1981 Cadillacs (except for the Seville, which had the troubled Oldsmobile diesel engine as the base powerplant and the V8-6-4 as an option). Unfortunately, the V8-6-4 worked about as well as the Oldsmobile diesel: very poorly. Within a few years, most owners of these engines had disconnected the rocker-deactivation solenoids and just drove their cars as regular full-time V8s. This one has the snazzy "Cabriolet Roof Treatment" option, which boasted "textured elk grain" vinyl and could be had in one of 17 available colors. Front-wheel drive gave the early-1980s Eldorado plenty of interior space, despite its more proletarian Olds Toronado origins, and these velour-covered seats made for very comfortable road trips. The price tag started at $17,550, or about $51,650 in 2019 dollars. The 1981 Imperial went for $18,311, and that car was based on the same platform as the lowly Plymouth Volare. Meanwhile, A BMW 733i cost $28,945 and a new Toyota Cressida a mere $11,599. The 1981 Cadillacs were just a little too much ahead of their time, it turned out.

2021 Cadillac Escalade, GMC Yukon, Chevy Suburban/Tahoe recalled for stall risk

General Motors is recalling just shy of 15,000 2021 Cadillac Escalade & Escalade ESVs, Chevrolet Suburbans and Tahoes, GMC Yukons and Yukon XLs that were shipped with fuel pumps that were built with a batch of what may be faulty electronic control modules. A pump with a bad module can result in intermittent function, resulting in drivability issues and potential stalls. No serious incidents or injuries have been associated with the issue.  GM says it discovered the issue after analyzing early recall data for the 2021 model SUVs and discovering an unusually high failure rate for fuel pumps manufactured by a single supplier – Vitesco. The company was able to identify the batch and initiate a recall campaign targeting just those vehicles.  "After reviewing the field data, GM determined there were 617 potentially relevant complaints, which were received between April 15, 2020 and August 24, 2021," the company's recall report said. "229 of these complaints reported a stall while standing or moving. No accidents or injuries associated with this condition were found." Any SUVs built with pumps from that batch but not yet sold are being held at dealers for replacement parts. It may take some time for GM to source replacements due to the ongoing electronic parts shortages.  "We are working with the supplier to obtain the required parts as quickly as possible," GM said in its notice to dealers. "When sufficient quantity of parts are available, the recall bulletin will be released and dealers can begin repairing vehicles."