2011 Cadillac Cts-v Coupe 2dr Cpe on 2040-cars

Auto blog

Cadillac SRX and Saab 9-4X recalled for suspension defect

General Motors has recalled 380,498 vehicles due to rear suspension toe link adjusters that may not have been tightened properly, which could result in a loose toe link. The vehicles affected by the recall are Cadillac SRX crossovers built between 2010 and 2016, and Saab 9-4X crossovers built in 2011 and 2012. A loose toe link could cause instability while driving, especially at highway speeds. This recall follows up an investigation by the National Highway Traffic Safety Administration after it received complaints from SRX drivers of uncontrolled swaying while driving. According to the agency, two incidents led to a crash. It's possible that improper procedures for tightening a toe link nut during four-wheel alignments may have resulted in corrosion and thread wear on the adjustable portion of the link. Owners of affected vehicles are advised to park their crossovers if they experience certain Malfunction Indicator Lamp warnings on the dashboard or if they feel unusual steering behavior while driving. According to the official NHTSA recall notice, dealers will replace the adjustable toe link with a non-adjustable one at no charge. Letters are expected to be mailed to owners of affected vehicles on August 9, 2021. Alternatively, owners can call Cadillac customer service at 1-800-458-8006 or Saab customer service at 1-800-955-9007 and reference recall number N212340980. This is the second time many of these vehicles have been recalled for problems with the rear toe links. Back in September of 2014, GM announced that it would recall 290,241 vehicles that included SRX and 9-4X models because a "nut in the rear suspension toe adjuster link may not be torqued to the proper specification." 

GM’s move to Woodward is the right one — for the company and for Detroit

Back in 2018, Chevy invited me to attend the Detroit Auto Show on the company dime to get an early preview of the then-newly redesigned Silverado. The trip involved a stay at the Renaissance Center — just a quick People Mover ride from the show. IÂ’d been visiting Detroit in January for nearly a decade, and not once had I set foot inside General MotorsÂ’ glass-sided headquarters. I was intrigued, to say the least. Thinking back on my time in the buildings that GM will leave behind when it departs for the new Hudson's site on Woodward Avenue, two things struck me. For one, its hotel rooms are cold in January. Sure, itÂ’s glass towers designed in the 1960s and '70s; I calibrated my expectations accordingly. But when I could only barely see out of the place for all the ice forming on the inside of the glass, it drove home just how flawed this iconic structure is.  My second and more pertinent observation was that the RenCen doesnÂ’t really feel like itÂ’s in a city at all, much less one as populous as Detroit. The complex is effectively severed from its surroundings by swirling ribbons of both river and asphalt. To the west sits the Windsor tunnel entrance; to the east, parking lots for nearly as far as the eye can see. To its north is the massive Jefferson Avenue and to its south, the Detroit River. You get the sense that if Henry Ford II and his team of investors had gotten their way, the whole thing would have been built offshore with the swirling channel doubling as a moat. This isnÂ’t a building the draws the city in; itÂ’s one designed to keep it out. Frost on the inside of the RenCen hotel glass. Contrasted with the new Hudson's project GM intends to move into, a mixed-use anchor with residential, office, retail and entertainment offerings smack-dab in Detroit's most vibrant district, the RenCen is a symbol of an era when each office in DetroitÂ’s downtown was an island in a rising sea of dilapidation. Back then, those who fortified against the rapid erosion of DetroitÂ’s urban bedrock stood the best chance of surviving. This was the era that brought us ugly skyways and eventually the People Mover — anything to help suburban commuters keep their metaphorical feet dry. The RenCen offered — and still offers — virtually any necessity and plenty of nice-to-haves, all accessible without ever venturing outside, especially in the winter, but those enticements are geared to those who trek in from suburbia to toil in its hallways.

Cadillac CT6 V-Sport wants to take prisoners with 550-hp 4.2L TT V8

With the refresh of the Cadillac CT6 for 2019, Cadillac welcomes the first CT6 V-Sport as well as a new trim strategy. The changes at the front for the CT6 lineup don't appear substantial viewed head-on, one needs a side view to appreciate the greater three-dimensionality. Thinner headlights and a thinner bumper above a slightly larger lower front intake emphasize the mesh grille, and the vertical LED DRLs make more dramatic statements thanks to those narrower headlights. By angling the main units back toward the rear of the sedan, the CT6 now has a certified, sculpted snout. The rework appears to add substantial overhang, but overall length only increases by a tenth of an inch, to 204.1 inches. What's under the V-Sport's probing hood is just as interesting as the redesign and the sporting thrust: A clean-sheet design of a 4.2-liter DOHC twin-turbo V8. In the V-Sport, the engine produces 550 horsepower and a Bentley-esque 627 pound-feet of torque. As an optional engine elsewhere in the CT6 range, the same engine produces 500 hp and 553 lb-ft. The displacement, specs, plus the fact that "each engine will be hand-built at the Performance Build Center in Bowling Green, Kentucky" indicate this was one of the rumored powerplants for the mid-engine Corvette. The coming sports car was tipped to get a 4.2-liter and 5.5-liter DOHC twin-turbo V8. Based on the position of the turbos in this engine vs. their positions in the previous CAD drawings, we assume the drawings represented the 5.5-liter. (Note: Cadillac said Corvette will not get the new 4.2-liter twin-turbo engine.) The 4.2-liter item features an aluminum block, heads, and pistons, direct injection with a 9.8:1 compression ratio, cylinder deactivation, cylinder oil jets, and a variable-pressure oil system. The twin-scroll turbochargers capable of 20 pounds of boost sit in the 90-degree vee, working alongside twin water-to-air intercoolers, twin throttle bodies, and twin electric wastegates. Cadillac says 90 percent of torque arrives at 2,000 rpm and loiters through 5,200 rpm. Power gets sent through GM's 10L90 ten-speed automatic transmission and on to the standard all-wheel-drive system. Cadillac didn't list 0-to-60-mph times in its press release, but engineers have track-worthy alacrity in mind for the CT6 V-Sport.