2011 Cadillac Cts on 2040-cars

Auto blog

Cadillac's 4.2-liter Blackwing V8 to die with the CT6?

Cadillac's 4.2-liter twin-turbo Blackwing V8 debuted only last year, popping up in the CT6 V-Sport — now the CT6-V — with 550 horsepower and 627 pound-feet of torque. The engine's been stymied in every attempt to power a different Cadillac model since then. Its only two use cases have been a first and second run of the original, limited-edition super sedan and the CT6 Platinum V8 trim at a slightly detuned 500 hp and 553 lb-ft. Motor Trend cites "a highly placed source at GM" as saying that the Blackwing won't go into the coming high-performance version of the CT5-V nor in the next-gen Escalade. Left without options, there's a chance the Blackwing will die with the CT6, itself a sedan with its grille on the executioner's block just waiting for the bite of an ax that might or might not shortly fall. Cost-cutting has been tagged as the reason for this misfortune; Cadillac's sales malaise and lack of clarity as to how to turn sales around led GM to downsize the brand's allowance. The parent company chose to build the new CT5 on the Alpha platform used for the erstwhile ATS and CTS instead of the Omega platform underpinning the CT6. Along with that choice, the MT report says expense reasons nixed fitting the Blacking V8. We know the lower-tier V series CT5 will work with a twin-turbo 3.0-liter V6 making 355 hp and 400 lb-ft. When we heard spy video of the upper-tier V series CT5 out testing, the engine sounded like the 6.2-liter supercharged V8 that would be a carryover from the last model.  The XT6, also rumored to get some V sauce, simply can't fit the V8. Instead of sitting on the Omega platform as once planned, the XT6 rides on the C1XX architecture under other GM products like the Buick Enclave and Chevrolet Traverse. The C1XX engine bay doesn't have room for a stouter V6, much less a hi-po V8. The next-gen Escalade ruled itself out due to price issues in back, not in front. MT writes that the independent rear suspension supporting GM's next-gen full-sized SUV quartet has burned through cash in development, putting engineers a few direct deposits short of the funds needed to massage Blackwing installation. Earlier this year at least one report said the twin-turbo DOHC V8 could serve the top-spec next-gen Escalade. More recent reports of a performance-heavy next-gen Escalade have predicted the 6.2-liter supercharged LT4 V8 from the Chevrolet Camaro ZL1 and Corvette Z06.

VW, Jeep and Cadillac top list of most-tattooed car brands

Most car enthusiasts own at least one piece of gear with their favorite brand's logo on it. It can be a T-shirt, a pen, a hat, or a garage sign, for example. It takes a much greater degree of dedication to get a car-themed tattoo, and a study suggests this sky-scraping level of obsession is most often found in Volkswagen, Jeep, and Cadillac fans. Compare the Market analyzed Instagram hashtags and posts to compile a list of the most commonly tattooed brands. Volkswagen came out on top, with 5,507 posts; note that anything related to the Wolfsburg-based brand earns it a point, whether it's a logo, a cutaway diagram of the Beetle's air-cooled flat-four engine, or a Touareg V10's firing order. Jeep finished second with 2,139 posts, followed by Cadillac at 1,775 posts. Surprisingly, the fourth spot is occupied by Pontiac, which appeared in 1,609 posts in spite of the fact that it hasn't built a car since 2010. Holden appears near the very bottom of the top-20 chart, ahead of Lamborghini, and its result might be influenced by the fact that General Motors announced plans to shutter it earlier in 2020. BMW and Mercedes-Benz are in sixth and 12th place, respectively. Alfa Romeo doesn't appear in the top 20, though its decades-old Quadrifoglio logo (pictured) can easily be mistaken for a symbol of Irish luck. Searching for posts that show a tattoo of a specific model uncovered even bigger surprises. According to the same study, the most-tattoed nameplate is the Chevrolet Impala, which appears in 823 posts. Odds are the earlier generations, like Dr. Dre's famous six-four, are more often tattooed than the final-generation model, which unceremoniously went out of production in February 2020 without a direct replacement waiting in the wings. Second place goes to the DeLorean DMC-12, which has transcended its status as an esoteric fiasco on wheels thanks to its role as a time machine in "Back to the Future." It appeared in 800 posts. Chevrolet's Corvette takes a distant third with 180 posts, followed by the Volkswagen Beetle (147 posts) and the Mini Cooper (116 posts). All told, car-themed tattoos are relatively rare. To put some of the aforementioned numbers into context, searching Instagram for the hashtag Volkswagen yields over 15 million posts, while the hashtag tattoo appears in over three million publications. Auto News Cadillac Chevrolet Jeep

Super Cruise’s failsafes

Even though Super Cruise is not a fully autonomous system, it incorporates redundancies like those used in aircraft to ensure failsafe operation. Before taking off on a 700-mile, 11-hour test drive of the system — and putting my life in its hands without my hands on the wheel — I sat down with Daryl Wilson, lead development engineer for Super Cruise, to get a deep dive into the system and its critical safety backups. Autoblog: First, what makes Super Cruise different from similar systems? Wilson: The key differentiator for Super Cruise is hand-free driving. It's an industry first in that respect. Our competitors require the driver at minimum to place their hands on the wheel with some frequency to ensure that the car knows that the driver is there. We don't. Two key technologies allow us to do this. One is our Driver Attention System, which is our methodology for making sure the driver is engaged with the vehicle and engaged with the road. This is a driver assist system, not a fully autonomous system. So it requires driver engagement. We use an infrared camera that constantly monitors the driver's face to determine the direction they're looking. We're looking for the driver to be what we call on-road — not on the center stack, not to left or right or down. That's all done by the tracking of the face. We also track that the eyes are open. It's infrared because at night you need to illuminate the face and you can't be shining a light into the driver's face. Then we have our lidar mapping that provides a foundation for control and redundancy to ensure safe performance. Autoblog: How does the mapping act as a redundant feature? Wilson: This system is only for use on divided, controlled access highways. What I mean by a divided highway is something more than a painted line between you and oncoming traffic. Whether that's a grassy area in between the lanes or a concrete barrier, anything that separates you from oncoming traffic. That's the divided highway part. The controlled access part is entrance ramps and exit ramps. Not with roads that cross at grade, with traffic crossing at the same level. To do that we geofenced these roads to ensure that operation is only allowed in these conditions. We don't just recommend you use it there; we ensure that you only use it there.