2005 Cadillac Cts on 2040-cars

Auto blog

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video:

2016 Hennessey CTS-V is properly ridiculous with 1,000 horsepower

We truly live in a halcyon era of automotive performance with models like the latest Shelby GT350 Mustang and 707-horsepower Challenger Hellcat. And now Hennessey Performance Engineering is bringing something with absolutely obscene power to the world with its tuned 2016 Cadillac CTS-V that packs a ludicrous 1,000 horsepower. The latest CTS-V isn't even on sale yet but should be a powerhouse straight from the factory. Under its carbon fiber hood is a 6.2-liter supercharged LT4 V8 with 640 horsepower and 630 pound-feet of torque that makes the sedan capable of a 200-mile-per-hour top speed. Hennessey's take ditches the blower in favor of two turbos to feed air to the engine. To cope with the extra power, the mill gets upgrades like forged aluminum pistons and forged steel parts for the rods and crankshaft, and transmission upgrades are also necessary to make it all work. Buyers can even spec things like carbon-ceramic brakes and a widebody kit to allow for bigger tires. The crazy numbers are leading to some big performance claims from company founder John Hennessey. "I believe that our 2016 Twin Turbo CTS-V will have a top speed approaching 240 mph," he said in the Caddy's announcement. Hennessey is building just 24 of these 1,000-horsepower sedans for the 2016 model year. However, for those that want to keep the supercharger under the hood, the company is also offering upgrades with 750 hp and 800 hp for the CTS-V too. All of them sound absolutely ridiculous in an utterly fantastic way. 2016 HPE1000 Twin Turbo Cadillac CTS-V Texas Tuner Plans to Build World's Fastest 4-Door Sedan Sealy, Texas-When the next generation Cadillac CTS-V hits the streets later this year, it will have 640+ hp and a top speed of nearly 200 mph. To the team at Hennessey Performance Engineering (HPE), this is a good starting point. The company plans to pick-up where they left off with the last gen CTS-V by producing the world's fastest 4-door sedan: The Hennessey HPE1000 Twin Turbo CTS-V. "A couple of years ago, the State of Texas gave us the opportunity to test one of our specially tuned CTS-Vs – our VR1200 Twin Turbo coupe. It ran 221 mph (356 km/h) on State Highway 130, near the Circuit of the Americas", said company founder, John Hennessey. "It was still pulling on when we ran out of road. I believe that our 2016 Twin Turbo CTS-V will have a top speed approaching 240 mph (386 km/h)". Hennessey plans to offer a limited run of only 24 units for the 2016 model year.

Why an independent rear suspension for GM's new, full-sized SUVs wasn't easy

A Motor Trend report last month laid out how Cadillac's 4.2-lier twin-turbo Blackwing V8 could be an orphan due to cost concerns in the GM empire. Last-minute chassis changes to Cadillac's new sedans and XT6 crossover led to engine bays that couldn't fit the Blackwing. On the SUV side, according to the report, the new independent rear suspension for big people haulers cost so much to implement that GM ruled out reworking the Escalade to accept the Blackwing. At least one commenter rightly asked how could a suspension swallow that much money. A new piece in Motor Trend has the answer. The excellent Alissa Priddle spoke to Tim Herrick, GM's executive chief engineer for full-size trucks, about why the clean-sheet IRS cost "multimillions of dollars."  First, GM would need to build a new body shop at the Arlington, Texas plant that assembles the automaker's big SUVs to stamp the numerous wholly new parts and panels accommodating an IRS. Then GM would need to design and pay for a new assembly process. On top of those up-front costs, there was the incremental cost of the four-link IRS components being more expensive than those in the trucks' former leaf-sprung solid axles. Herrick endured so many rejections for so long that he remembers the date and time when he got approval for the new unit. He said it came down to a meeting where he told a higher-up, "I'll make you a deal: If we get to the reveal, or if we launch this and you think this was a dumb idea, I'll hand you my badge and let you walk me out." Head to Motor Trend to read the full story. Based on Herrick being on stage to help present the new SUVs to the press, and on our First Ride in the new Chevrolet Tahoe and Suburban at GM's Milford Proving Grounds, it appears this will have a happy ending for all involved. Furthermore, since Herrick worked on the T1 platform that supports the big SUVs as well as the light- and heavy-duty pickups, he understood the demands on the commercial side, too. That could be why when Roadshow asked Tim Asoklis, chief engineer of the Tahoe and Suburban, if the new IRS could endure life in the Chevrolet Silverado and GMC Sierra, Asoklis answered, "Oh, absolutely." Related Video: