2005 Cadillac on 2040-cars

Auto blog

GM invests $175 million to replace 3 Cadillac sedans with 2

We've already had confirmation that Cadillac is sunsetting the ATS compact sedan and strong hints that Caddy would discontinue the full-size XTS (pictured above) and midsize CTS, too. Now all three are confirmed, with GM saying it's investing $175 million to build two replacement sedans. GM has already begun installing new tooling at its Lansing Grand River assembly plant in Michigan. That will go toward building two new sedans, which reports suggest are likely to be called the Cadillac CT5 and CT4, or possibly the CT3. It's part of Cadillac's plan to introduce a new vehicle every six months by the end of 2021. A spokesman told the Associated Press that the new cars will debut within that time frame and that the changes won't affect staffing levels at the plant, which employs 2,000 people. Of the three, the XTS is expected to go away entirely, while the CT5 would replace the CTS, straddling the line between a compact and midsize four-door. The CT4 or CT3 would take the spot of the ATS and likely be smaller. That would leave the CT6 as the brand's largest sedan and leave Cadillac with three sedans starting with the 2019 model year. Meanwhile, Cadillac has only one model, its top-selling XT5, representing the all-important and red-hot luxury crossover segment. It's prepping a midsize XT4 crossover for sale later this year as a 2019 model. Cadillac's global sales rose 15.5 percent in 2017, thanks largely to growth in China, but sales in the U.S. fell 8 percent for the year to 156,440 vehicles. Sales of the ATS fell 39 percent, dropped 35 percent for the CTS and 27 for the XTS last year. Related Video:

Super Cruise’s failsafes

Even though Super Cruise is not a fully autonomous system, it incorporates redundancies like those used in aircraft to ensure failsafe operation. Before taking off on a 700-mile, 11-hour test drive of the system — and putting my life in its hands without my hands on the wheel — I sat down with Daryl Wilson, lead development engineer for Super Cruise, to get a deep dive into the system and its critical safety backups. Autoblog: First, what makes Super Cruise different from similar systems? Wilson: The key differentiator for Super Cruise is hand-free driving. It's an industry first in that respect. Our competitors require the driver at minimum to place their hands on the wheel with some frequency to ensure that the car knows that the driver is there. We don't. Two key technologies allow us to do this. One is our Driver Attention System, which is our methodology for making sure the driver is engaged with the vehicle and engaged with the road. This is a driver assist system, not a fully autonomous system. So it requires driver engagement. We use an infrared camera that constantly monitors the driver's face to determine the direction they're looking. We're looking for the driver to be what we call on-road — not on the center stack, not to left or right or down. That's all done by the tracking of the face. We also track that the eyes are open. It's infrared because at night you need to illuminate the face and you can't be shining a light into the driver's face. Then we have our lidar mapping that provides a foundation for control and redundancy to ensure safe performance. Autoblog: How does the mapping act as a redundant feature? Wilson: This system is only for use on divided, controlled access highways. What I mean by a divided highway is something more than a painted line between you and oncoming traffic. Whether that's a grassy area in between the lanes or a concrete barrier, anything that separates you from oncoming traffic. That's the divided highway part. The controlled access part is entrance ramps and exit ramps. Not with roads that cross at grade, with traffic crossing at the same level. To do that we geofenced these roads to ensure that operation is only allowed in these conditions. We don't just recommend you use it there; we ensure that you only use it there.

Cadillac clears camo off the XT3 revealing grille, lighting details

Up until now, every Cadillac XT3 we've seen has been buried under covers and vinyl wraps, but one of our spy photographers recently captured a group of them with significantly less camouflage. As a result, we finally get a relatively clear picture of what the car will look like. The nose blends the look of current Cadillacs with cues from last year's Escala concept. The headlights still appear to stretch up into the top of the fenders like its production brethren, but they don't descend as far down the front fascia, a hint of Escala influence. The grille also features more of egg-crate mesh like that Cadillac concept. In profile, we can see evidence of the XT3's smaller size compared with the XT5, mainly in the lack of any glass area behind the rear door. Other evidence of the smaller size is that our spy photographer reports the cars were being tested alongside the BMW X3 and Mercedes-Benz GLC-Class. The profile also shows that the XT3 will have a hard-edged rear end with a rakish hatch. At the back, there isn't a whole lot to report, but the taillights look like they'll be interesting. There appears to be a horizontal element in the middle of the hatch similar to what we've seen on the Escala and the refreshed XTS. We can also see some lights up on the C-pillar, which indicates that the XT3 will also have tall vertical elements up those pillars like on the Escalade. We expect the XT3 to show up late in 2018. It will likely be powered by a turbocharged four-cylinder of some sort, and because it will probably be based on an existing GM crossover or sedan platform, it will probably have front-wheel drive and/or a front-drive based all-wheel-drive system. Related Video: Featured Gallery Cadillac XT4 Spy Shots View 13 Photos Image Credit: Brian Williams Spy Photos Cadillac Crossover SUV Luxury cadillac xt3