2004 Cadillac Cts-v - Loaded!! - Low Miles!! on 2040-cars

Auto blog

Junkyard Gem: 1981 Cadillac Eldorado with V8-6-4 engine

Skyrocketing fuel prices caused by geopolitical events in 1973 and 1979 led to gas lines, federal fuel economy requirements, and an increasing reluctance on the part of American car shoppers to buy big, thirsty Detroit luxury machines. General Motors had pulled off some amazing technological feats in the past — the small-block Chevrolet V8 engine and Hydramatic transmission being two extraordinarily successful ones — and so Cadillac's bosses figured that a combination of computer wizardry and clever mechanical engineering would give the 368-cubic-inch Cadillac V8 a cylinder-deactivation system and resulting superior fuel economy. Here's a very rare example of one of those 1981 Cadillacs, found in a California self-service wrecking yard. The idea behind the V8-6-4 was that computer-controlled solenoids would physically disengage the rocker arms for one or two cylinders on each engine bank under low-load conditions, converting the engine from a 368-cube V8 to a 276ci V6 or 184ci V4 (that's 6.0, 4.5 or 3.0 liters, respectively, for the metric-system aficionados among us). This sort of variable-displacement magic is commonplace today, but it was science-fiction stuff in 1981. An "MPG Sentinel" display on the dash would let the driver know how many cylinders were active at the moment, and the car would get Chevy Citation fuel economy with Cadillac luxury. The V8-6-4 was the standard engine in all 1981 Cadillacs (except for the Seville, which had the troubled Oldsmobile diesel engine as the base powerplant and the V8-6-4 as an option). Unfortunately, the V8-6-4 worked about as well as the Oldsmobile diesel: very poorly. Within a few years, most owners of these engines had disconnected the rocker-deactivation solenoids and just drove their cars as regular full-time V8s. This one has the snazzy "Cabriolet Roof Treatment" option, which boasted "textured elk grain" vinyl and could be had in one of 17 available colors. Front-wheel drive gave the early-1980s Eldorado plenty of interior space, despite its more proletarian Olds Toronado origins, and these velour-covered seats made for very comfortable road trips. The price tag started at $17,550, or about $51,650 in 2019 dollars. The 1981 Imperial went for $18,311, and that car was based on the same platform as the lowly Plymouth Volare. Meanwhile, A BMW 733i cost $28,945 and a new Toyota Cressida a mere $11,599. The 1981 Cadillacs were just a little too much ahead of their time, it turned out.

Cadillac CT6 hybrid likely to appear in Shanghai

Cadillac is poised to reveal a hybrid version of the CT6 sedan later this month at the Shanghai Motor Show. Rumors have swirled of the sedan's pending reveal, and General Motors product chief Mark Reuss reportedly confirmed its existence last fall during an investor conference. On Wednesday, Reuss again said that GM is working on the hybrid CT6, and when asked by Autoblog, he hinted at the pending debut. "We've really got to wait until we finish rounding out the portfolio," he said. "The Shanghai show is where you should look for all of it. So stay tuned." A Cadillac spokesman declined to comment, but confirmed "we will add variants." The brand has already announced two V6 engines and is looking to expand the line. Reuss also said GM has considered a V-Series model for the CT6, but it's focusing on launching the four-cylinder and V6-powered sedans first and promoting V-Series versions of the CTS and ATS that arrive this year. "The [CT6] architecture is certainly capable of doing it," he said. "The question is who's going to buy the CT6? What kind of person? And do we need a V-Series off of that is the question we haven't answered yet. It's certainly capable of doing it ... we've certainly thought about it." Details of the hybrid powertrain aren't known, but it could use plug-in technology. Chevrolet announced the 2016 Malibu will get a hybrid model that employs electric powertrain features from the new generation of the Volt. For the CT6, electric-vehicle technologies would likely be used to extend range and aid the performance of the conventional engine. Related Video:

Cadillac CT6 refresh has hints of Escala

Almost a year after Cadillac showed its stunning Escala concept at Pebble Beach, we're finally seeing some of that car's influence on production cars. These spy shots reveal that the CT6 will undergo a mild refresh, and despite the camouflage, we can make out details that show it will have looks more in line with the concept. One of the defining characteristics of the Escala were narrow, horizontal headlights, while the current CT6 has long, vertical lamps that go up the tops of the fenders. This prototype seems to split the difference. The bases of the lights terminate higher up on the fascia, emulating the Escala, but still travel up the fenders. It also appears that the LED accent lights remain, but it's possible they've been separated from the main lamps to become more like the concept. The grille has also been revised. It's hard to make out the exact shape, but the insert is the same type of mesh as the Escala's, with little highlights that look like miniature Cadillac crests. The full-size, full-color crest also appears to sit higher in the grille, which is another nod toward the concept. The lower grille in the front bumper also looks larger and more angular. That doesn't really lean toward either model, but should give the car an edgier look. The rest of the car looks generally the same as the current model. Even the tail shows little indication of changes. It's possible that the rear taillights could have an Escala-like horizontal section at the top of the trunk lid, but there's nothing visible on this prototype that would confirm that change either way. Since this is a relatively mild refresh, we would expect to see it fully revealed early next year. Related Video: