1987 Allante * Both Tops * Low Miles * Air * on 2040-cars

Auto blog

NHTSA approves hybrid rearview mirror display in Cadillac CT6, Bolt EV

The Chevy Bolt EV prototype doesn't just have a fancy new all-electric powertrain. Just outside the driver's line of sight is a newfangled rearview mirror, one that can turn into a screen that shows a moving image from the rear-facing camera. Speaking to NPR's Robert Siegel yesterday, Department of Transportation secretary Anthony Foxx said that NHTSA has now approved this type of mirror/screen for use in vehicles. According to a letter from NHTSA to General Motors, GM will likely use this Full Display Mirror first in the 2016 Cadillac CT6 before coming to the Bolt. In its letter to GM, NHTSA said that the Full Display Mirror will only qualify as a standard rearview mirror as long as there are normal side mirrors in place. In other words, don't expect to see cameras and screens replacing all the mirrors in a motor vehicle just yet. @AutoblogGreen @NPR - #NHTSA has OK'd GM rear-view system that can switch between mirror & camera views. pic.twitter.com/6CBeIit10v — Anthony Foxx (@SecretaryFoxx) February 22, 2016 The Full Display Mirror was developed by Gentex, which has long worked with GM. The FDM debuted in 2014 and some people hoped it would also make its way into the Tesla Model X. Gentex, which also makes auto-dimming mirrors, says that it has "set out to develop the technologies and core competencies necessary to manage this evolution of the rearview mirror." The Chevy Bolt EV will start at $37,500, before incentives. The 200-mile EV will go into production late this year for likely sale in early 2017. Related Video:

Why does this Cadillac fob seem to be for a mid-engine roadster?

Is GM bringing back its Caddied-up Corvette sibling, the Cadillac XLR — only this time based on the mid-engine Corvette? That's the question posed by photos of a wedge-shaped Cadillac key fob someone provided to The Drive. The buttons show a trunk — and also a frunk. So, mid-engine, unless the fob goes with an EV that has its motors and other electrical bits scattered to the wheels and elsewhere. Also, there's a button to operate a droptop. And the car profile on the fob is Corvette-like. All of which makes for some pretty great speculation. Except that Cadillac's way back from the failures of its sedan-centric lineup was thought to be through SUVs such as the new XT4 compact crossover, the XT5 and the somewhere-in-testing three-row XT6. Plus, the XLR, which was produced between 2003 and 2009, hit its sales peak in 2005 of just 3,730 cars, or about one-tenth the sales volume of the Corvette. So it's hard to imagine there's a vast untapped market out there for the luxury roadster — plus the XLR's demographic of well-to-do grandpas is dying off, or at least thinks it is. So a resurrected XLR would seem to be an unlikely savior. A lot's happening with GM's luxury brand — the debut of the XT4 at long last, a new boss, a thinning of the sedan herd but expansion of the V's, a backtrack to Detroit after its New York sojourn, the cash-cow Escalade under direct assault from the fine new Lincoln Navigator, and the impressive performance of its Super Cruise technology. But an XLR? So what is this fob's story? The Drive speculates it's a universal test fob and the buttons don't necessarily mean a thing, or that somebody stuck a Caddy emblem on it just to yank our chains. Who's to say. What would you like it to mean? Related Video:

Cadillac XT3 caught covered in copious camouflage

While a bit difficult to tell thanks to the impressive camouflage used, what we're looking at here is likely the upcoming Cadillac XT3. There are a few details that stand out to lend credence to this prediction. There are a handful of sharp angles scattered throughout that are in line with Cadillac's modern design language. Specifically in the LED running lights and on the side mirrors. The rear profile also is reminiscent of the current, and slightly larger XT5. The rear lights extend into the D-pillars, which would match the current Escalade. We get a pretty clear picture of the rear suspension on this XT3. It's clearly an independent rear suspension using coil springs. While General Motors uses independent suspension on some of its crossovers, we can't quite match it to a particular model. We believe that if the XT3 is based on an existing model (which it almost certainly is), the platform and suspension have been substantially modified. The XT3 could use a version of the D2XX platform that underpins the Buick Envision. However, we know from a previous report that the XT3 will likely be built at the factory that produces the Buick LaCrosse and Chevy Malibu. The XT5 uses a modified version of the LaCrosse/Malibu platform, so it's possible the XT3 could use a shorter version of the XT5 chassis. Depending on how small the XT3 ends up being, it might even share a platform with the Chevy Trax and Buick Encore. However, considering their economy car roots and torsion-bar rear suspension, we think that's the least likely. Regardless of what chassis is underneath its crisp bodywork, we expect the XT3 to be released sometime next year. Related Video: