1996 Woody Wagon With 6 Speed Manual Transmission on 2040-cars

Auto blog

2021 Buick Envision order guide shows $32,995 base price

Based on an early dealer guide Cars Direct got its hands on, the 2021 Buick Envision will bring more to the market than handsome new design inside and out. The 2020 Envision in 1SV and Preferred trims starts at $33,500 plus a $1,195 destination charge, totaling $34,695. The dealer guide shows the 2021 Envision Preferred starting at $32,995 after destination, a $1,700 cut compared to this year's model. The 1SV was also listed in the guide but didn't get a price. A Buick spokesperson confirmed to Cars Direct that the Preferred trim will be the new entry-level, so it appears the 1SV could go away. The two trims are equipped the same as standard, the difference being that Preferred opens up the options menu to features like the Active Package and a powered panoramic moonroof. That pricing puts the 2021 Envision thousands of dollars under of its luxury competitors like the Acura RDX, Audi Q5, Lexus NX, and Lincoln Corsair. The price of the middle Essence trim doesn't change, at $36,995 after destination.   The current Premium trim will be replaced by the Avenir trim. At present, the Premium trim only comes in all-wheel drive, which Buick has changed for the 2021 model year. A 2021 Envision Avenir with front-wheel drive will start at $41,395, which is $500 less than a 2020 Envision Premium with all-wheel drive. Adding power to the rear axle adds $1,800 to the price, the Envision Avenir AWD the most expensive model at $43,195. That's a $1,600 cut compared to the 2020 Envision Premium AWD. The only engine on offer will be a 2.0-liter turbocharged four-cylinder with 230 horsepower and 258 pound-feet of torque, the same engine in the 2021 Envision's E2 platform-mate, the Cadillac XT4. That output falls between the two engines that can be had on the 2020 Envision, either the base 2.5-liter four with 197 hp and 192 lb-ft, or an optional 2.0-liter turbo four with 252 hp and 295 lb-ft.  Related Video:

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.

Opel Insignia OPC getting facelift. Will the Buick Regal GS see it, too?

We've seen spy shots of the base Opel Insignia wearing facelifted front and rear ends, and now it appears that the more potent OPC version will be benefitting from a nip/tuck, as well.
The front bumper has been redesigned, incorporating new air intakes - toned-down versions of the model's signature fangs - as well as a new grille. Out back, there will be minimal changes to the overall fascia, most likely stuff like slightly redesigned taillamps, and inside, these spy shots show a larger navigation/infotainment screen sitting atop the center console.
This is all well and good for the Insignia, but we're wondering how these changes will impact North America's Buick Regal GS. No, it may not share the same powertrain punch as the Euro-spec OPC, but visually, the cars are nearly identical. When questioned about possible changes for the GS, a Buick spokesperson told us that the automaker "can't comment" on any changes at this point. Even so, we wouldn't be surprised if some small changes come our way in the next year or so.