1996 Buick Roadmaster, No Reserve on 2040-cars

Auto blog

Restyled 2014 Buick Regal adds AWD, Regal GS loses power

Although the current Buick Regal hasn't even been on the market for very long, General Motors is using the New York Auto Show to unveil an updated version of the sedan in a similar fashion to what we saw yesterday with the 2014 LaCrosse. Like the LaCrosse, all 2014 Regal models will be getting a new look both for the exterior and interior design, but the big news takes place under the sedan's skin.
Except for the base Regal eAssist, the Regal Turbo and Regal GS will both be adding the benefit of all-wheel drive, but there is no word as to how much weight this system will add to each car's curb weight. The Regal Turbo's 2.0-liter turbocharged four-cylinder has received a decent bump in output from 220 horsepower and 260 pound-feet of torque to 259 hp and 295 lb-ft; unfortunately, these same figures are carried over to the Regal GS, which means that car drops from 270 hp. Both turbocharged models (Regal Turbo and Regal GS) will now be offered with all-wheel drive and the ability of sending more than 90 percent of the engine's torque to the rear wheels.
In terms of styling, the 2014 Regal gets similar styling changes found on the updated Enclave and LaCrosse, including reworked fascias, scalloped headlights and a full-width chrome strip spanning between the new LED taillights. Inside, key changes were made to the Regal's cabin technology, such as the instrument gauge cluster and infotainment system. On the Regal and Regal Turbo, a new 4.2-inch color display is available for drivers to see information for the vehicle, navigation and audio systems, but the Regal GS' cabin is slightly different with an eight-inch configurable gauge display. One of the best changes may be the overall reduction in buttons on the center stack, creating a cleaner-looking and easier-to-use cabin.

Next-generation Buick Enclave spotted with Wildcat looks

The rollout of GM's next-generation three-row large SUVs is well under way with the reveals of the 2024 Chevy Traverse and GMC Acadia. Another vehicle on the platform is also getting a redesign soon, according to these spy photos: the Buick Enclave. It's still going to be big, and it will now receive the same sort of Wildcat concept-inspired styling as smaller Buicks such as the Envista and Encore GX. The Enclave's front is where the Wildcat connection is the most clear. It has the pointy shark nose and wide, frowning grille. It's hard to say whether it will get a mesh grille like some of the production SUVs, or a slatted grille like the concept. High up are slender daytime running lights with the actual illuminating headlights hidden lower in the outboard air intakes. We're not totally sure if this look will work on such a large, tall vehicle, but we'll reserve final judgment when we can see the car with all its paint and trim on display. The sides of the Enclave still have a fair bit of the Coke bottle curves that have appeared on every Enclave, if a bit more toned down. The greenhouse seems to take after the GMC Acadia more than the Traverse, as it seems it has a relatively thin C-pillar. The D-pillar looks quite thick, which will probably be toned down with judicious application of gloss black plastic.  Details of the rear are difficult to make out. It seems to have slim, wide and curvy rear taillights. The rectangular exhaust tips are nicely fitted to the rear bumper. But that's about all that stands out. We're expecting the Enclave to have basically the same powertrain as the GMC Acadia, with the one engine offering being a turbocharged 2.5-liter four-cylinder with 328 horsepower and 326 pound-feet of torque. It should be paired with an eight-speed automatic and either front- or all-wheel drive. Odds are it will not get an off-road variant like the Acadia AT4 or Traverse Z71. But it might get a sportier road-going version that could take advantage of the torque-vectoring dual-clutch rear differential from those aforementioned off-roaders. It should also be revealed sometime next year with deliveries likely in the same year. Related video:

2017 Buick LaCrosse an evolution of sharp Avenir concept

After years as a bloated, uninspiring, but comfortable near-premium sedan, Buick has taken the wraps off a leaner, lither, far more stylish LaCrosse. The third-generation model has just made its debut at the 2015 Los Angeles Motor Show. While there's a lot to talk about, let's first address the new, Avenir-inspired sheetmetal. The fascia is basically the concept car smoothed over into production form, featuring the same winged trishield. In place of the chrome-trimmed waterfall, the LaCrosse gets a blacked-out, recessed grille with a chrome surround. It looks good in photos but it's better in person, adding a real sense of complexity and depth to the front end. The headlights and lower fascia, meanwhile, adhere closely to the concept. The same cannot be said of the LaCrosse's tail. While the taillight lighting pattern is similar, the overall shape of the lighting element is radically different, refining the design featured on the back of the Regal. Also gone, sadly, is the Avenir's boattail rear deck. Instead, the LaCrosse gets a small rear deck that curves up into a pleasant duckbill spoiler. The rest of the tail is pleasantly restrained. Perhaps the weakest point is the profile, where Buick has instituted a "split-spear" design, featuring a strong shoulder line above the rear wheel well, which sits below an even stronger character line that curves down and towards the front of the car. It strikes us as just a little too much, like the Impala. Underneath that sheetmetal, Buick has managed to trim nearly 300 pounds of body fat, nearly half of which came from the vehicle's actual structure. That 300 lbs, according to Buick's engineers, is equivalent to a Kenmore side-by-side refrigerator, in case you needed a helpful comparison. Despite the weight savings, Buick has upped the torsional rigidity for this new model by 15 percent. The LaCrosse's cabin features a strong, cockpit-like design, with a high, floating-bridge center console. This is possible due to Buick's adaption of the Electronic Precision Shift system, introduced earlier this month on the new Cadillac XT5. Despite the new-fangled console design, Buick's retained the wraparound cabin style introduced on the second-gen model. Based on a quick crawl around the interior, space is great in front, although ingress in back is somewhat difficult due to the roofline. You're probably wondering why we haven't said anything about the mechanicals just yet.