1996 Buick Riviera Base Coupe 2-door 3.8l Supercharged Classic on 2040-cars

Auto blog

Buick Enspire spied for the first time, loses concept's electric powertrain

About a year ago, Buick showed a high-performance electric crossover with wide, aggressive, curvy lines that was called the Buick Enspire. Now we have our first look at the production version. While it does seem to be styled like the crossover, it also seems to have lost its electric powertrain in favor of internal combustion. At the front of the crossover, we can clearly see it has the skinny, scowling headlights of the concept sitting high on the front fascia and flush with the hood. The main grille looks like it may be smaller, but it could also just be that the actual open section of the grille doesn't fill up the grille area of the fascia. In profile, the crossover has an attractive long nose, low roof and rising belt line. The rear shows the most change, as the rear pillars are much thicker, and the taillights don't appear to span the full width of the crossover. It's in the rear that we can also see the evidence that the Buick Enspire will actually be gasoline powered. Looking very closely under the rear bumper cover, we can see two exhaust tips turned to face the ground. Based on the size of the crossover, and the fact a Cadillac XT4 was being driven along with the prototype, the Enspire is probably using the XT4's platform, as well as its mechanical bits. That means it probably has a turbocharged 2.0-liter four-cylinder making 237 horsepower and 258 pound-feet of torque. Power will also probably go through a nine-speed automatic to either the front wheels or all four. This prototype looks to be pretty far along, so we'll probably see the production version in about a year. Considering the Enspire's size and likely powertrain, it may even replace the similar Buick Envision. And since the Envision is Buick's worst selling crossover (unless you count the Regal TourX as one), it would be ripe for replacement.

2014 Buick LaCrosse updated with new styling, tech

Buick might have one of the smallest lineups among major automakers, but by the time the 2014 model rolls around, it will definitely have one of the freshest. Debuting at the New York Auto Show this week, the 2014 Buick LaCrosse receives numerous styling changes inside and out, and it benefits from many of the same new features found on closely related models like the Cadillac XTS and the 2014 Chevrolet Impala.
Exterior changes are relatively minor, but they still help give the car a fresh, new look. The new face of the 2014 LaCrosse fits in with recently new or redesigned Buick models with its oversized waterfall grille, LED-trimmed headlights and the signature hood vents being moved to the side of the hood rather than the top. Similar changes have been made to the rear, like the reshaped LED taillights, the full-width chrome trim and a new fascia design; LaCrosse models equipped with the 3.6-liter V6 will still get the integrated exhaust finishers but they're executed in a more stylish manner than the current model. Finishing off the exterior, new wheel designs are also being introduced, which will include bringing 20-inch wheels to the sedan's option list.
Inside, Buick redesigned almost the entire cabin to create a more luxurious and upscale appearance. The instrument panel is essentially carried over, but pretty much everything else has been redesigned and updated with the biggest change being to the driver's area. Dual eight-inch configurable displays make up the center stack and gauge cluster, while the overall number of buttons have been reduced from 17 down to just seven. The 2014 LaCrosse will also be offered with the next-generation IntelliLink, which receives many of the same enhancements as Chevy's latest version of MyLink adding better customization, improved voice commands and more features including Pandora. Additionally, new door panels, seat and center console complete the LaCrosse's interior redesign.

Buick Wildcat EV concept previews the future of the brand

Once again, Buick has revealed a drop-dead stunner of a coupe concept, the Wildcat EV. And just like the Avista that came before it, don't get your hopes up too high for a production model. Buick hasn't said "no," but they haven't said "yes," either. But unlike the Avista, the Wildcat does give us a look at where Buick is going as far as styling, branding and technology. Also, did we mention it's freaking gorgeous? The Wildcat EV started out as a sketch by a Buick designer that caught the eye of the department, simply because it was really cool. The team started developing it further, and eventually the brand gave the go-ahead to bring it to the full-size concept you see here. It is purely a design concept, so although it's an EV by name, it doesn't have any kind of production powertrain or real specs. But it is designed with electric power in mind, as evidenced by the extremely long wheelbase and short overhangs. And this translates into Buick's electric future. The brand plans to be fully electric by 2030, and its first EV will launch in 2024 as a 2025 model. The shape of the coupe is very clean, simple and organic, but with interesting creases and intersections scattered throughout. It has wide haunches and a low, pointy nose. The grille is pushed down and made wide, which accentuates the shape of the car. The badge now sits atop the bumper, too. The greenhouse has blacked-out front pillars to create a wraparound look, and the roof has a gentle slope toward the rear. It incorporates a glass hatch, and the taillights blend into the glass and extend all the way up the rear pillars. While Buick isn't making a commitment either way for the Wildcat EV, these styling cues will appear on future Buick models. So imagine the front and rear fascias, the window treatment and sheetmetal detailing, but on other bodystyles, likely crossovers and SUVs. In fact, Buick said it has two models it will reveal later this year with some styling based on the Wildcat. Before we get too far from design, we should also highlight other cool aspects of the Wildcat EV concept. The wheels are turbine shaped as a throwback to Jet Age design and optimism. Each wheel took two months to produce and finish. The doors on the Wildcat are conventional, except for the gull-wing upper panels. They open up to make ingress and egress easier. And the interior is a gorgeous, mid-century-modern design.