White, Clean 3.8l on 2040-cars

Auto blog

2017 Buick LaCrosse an evolution of sharp Avenir concept

After years as a bloated, uninspiring, but comfortable near-premium sedan, Buick has taken the wraps off a leaner, lither, far more stylish LaCrosse. The third-generation model has just made its debut at the 2015 Los Angeles Motor Show. While there's a lot to talk about, let's first address the new, Avenir-inspired sheetmetal. The fascia is basically the concept car smoothed over into production form, featuring the same winged trishield. In place of the chrome-trimmed waterfall, the LaCrosse gets a blacked-out, recessed grille with a chrome surround. It looks good in photos but it's better in person, adding a real sense of complexity and depth to the front end. The headlights and lower fascia, meanwhile, adhere closely to the concept. The same cannot be said of the LaCrosse's tail. While the taillight lighting pattern is similar, the overall shape of the lighting element is radically different, refining the design featured on the back of the Regal. Also gone, sadly, is the Avenir's boattail rear deck. Instead, the LaCrosse gets a small rear deck that curves up into a pleasant duckbill spoiler. The rest of the tail is pleasantly restrained. Perhaps the weakest point is the profile, where Buick has instituted a "split-spear" design, featuring a strong shoulder line above the rear wheel well, which sits below an even stronger character line that curves down and towards the front of the car. It strikes us as just a little too much, like the Impala. Underneath that sheetmetal, Buick has managed to trim nearly 300 pounds of body fat, nearly half of which came from the vehicle's actual structure. That 300 lbs, according to Buick's engineers, is equivalent to a Kenmore side-by-side refrigerator, in case you needed a helpful comparison. Despite the weight savings, Buick has upped the torsional rigidity for this new model by 15 percent. The LaCrosse's cabin features a strong, cockpit-like design, with a high, floating-bridge center console. This is possible due to Buick's adaption of the Electronic Precision Shift system, introduced earlier this month on the new Cadillac XT5. Despite the new-fangled console design, Buick's retained the wraparound cabin style introduced on the second-gen model. Based on a quick crawl around the interior, space is great in front, although ingress in back is somewhat difficult due to the roofline. You're probably wondering why we haven't said anything about the mechanicals just yet.

China-market Buick Envista rumored possible replacement for the Encore

Buick currently sells four crossovers, the Encore, Encore GX, Envision, and Enclave. That number will soon be whittled to three, the Encore expected to end production after this model year. If speculation provided by GM Authority is correct, there could be changes afoot in the middle of the line in time for the 2024 model year. Buick has said it will maintain four ICE-powered crossovers, so the brand will need something to fill the coming gap. GMA sources suggest the China-market Buick Envista could get the nod. Buick launched the coupe-esque model across the Pacific in August, a relation to the Chevrolet Seeker that appeared on the Chinese market in April. The Envista debuted the brand's latest design language inspired by pure-electric concepts like the Electra-X and WIldcat. Thin, angled headlights frame a wide, low grille, leading back to a roof that slopes into a high back and double spoilers. GM applied to trademark the Envista name in the U.S. in early 2019, then maintained it with extension requests until earlier this year. Then, in September 2022, the automaker abandoned the application, which could bode ill for whatever chance there was, if any. Another snag could be that the Envista is 182.5 inches long, 71.5 inches wide, and 61.6 inches high on a 106.3-inch wheelbase. Various reports have pitched the Envista to fill the (small) space between the Encore GX and the Envision; however, the Envista falls just 0.10 short of the Envision's length, and it's three inches smaller in every other dimension. On the other hand, the Envista is 11.1 inches longer and 0.1 inch wider than the Encore GX, with a wheelbase 4.1 inches longer. That makes a lot of overlap in the dimensional Venn diagram. Were the Envista to come as-is, it wouldn't so much be a replacement for the Encore as be a different kind of compact SUV from the Envision on a more modern platform. Further speculation from "sources familiar with the matter" says a U.S.-market Envista could get the Avenir treatment. Avenir marks the ultimate in Buick luxury, an appellation currently restricted to the Envision and Enclave. According to a separate report, the Encore GX is also headed into the Avenir club with the compact crossover gets refreshed for the 2024 model year. An Encore GX Avenir would adopt some exterior tweaks like 18-inch alloys, and turn a load of optional equipment available for the Encore GX Essence trim into standard equipment. Related video:

1987 Buick Regal GNX driven just 54.8 miles heads to auction

The previously unimaginable prices for seemingly anything on any number of wheels continues to lure garage queens into the open. Here we have another Buick GNX headed to auction, this one Mecum's Summer Special in Orlando from July 6-9. Buick only made 547; it feels like half went to owners who never drove them. The last GNX auction we covered, in 2019 on Bring a Trailer, ended up grossing $200,000 for a model with 8.5 miles. This example has been driven much harder than that, praise be to enthusiasts, with 54.8 miles on the odometer. That means the original owner, who kept the coupe until 2017, got more than six times the use out of his GNX than the 2019 owner. Way to go. For those who haven't attended any classes on the Buick Regal GNX, allow us to summarize the subject matter. When Buick greenlit "a Grand National to end all Grand Nationals," out came the one-year-only 1987 GNX. A racier brand back then, it partnered with ASC/McLaren to work up the wheel lip flares, fender vents, 16-by-8-inch BBS rims, more aggressive tires, and the interior treatment. The Grand National trim used a 3.8-liter V6 making 245 horsepower and 355 pound-feet of torque hooked to a four-speed automatic. The GNX benefited from a larger Garrett T-3 turbocharger with a ceramic impeller, a larger intercooler, more aggressive fuel, spark, and waste gate tables, and a dual exhaust system that boosted output to what some say is an underrated 276 hp and 360 lb-ft.  This GNX headed to auction spices up the standard specs with the original order paperwork, window sticker, dealer invoice, ASC documentation, a GNX coffee table book, and a GNX jacket. That jacket could be the denim one or the high school varsity jacket with the cloth front and back and leather(ish) sleeves, which, sadly, didn't include Buick's attacking eagle logo of the time. We'd mention the black and sand gray cloth interior, power driver's seat and mirrors, and Delco Concert Sound stereo, but it's likely that the future owner won't spend much time with them. Likely fated to be a garage or show queen again, the jet black paint, "original parts stickers still affixed on suspension," and "original chalk markings throughout" will be the major points of interest. Mecum doesn't give a pre-sale estimate for this GNX, so we'll be waiting to find out if the 2019 sale price was an anomaly — well, more of an anomaly — or the new benchmark.