2003 Buick Ls on 2040-cars

Auto blog

Chevy Bolt-based prototype may be a Buick EV for China

Late last spring, we got a look at a GM prototype that was clearly based on the Chevy Bolt EV, but with updated styling. It seemed like it could be a more crossover-styled Bolt, given the recently trademarked name of EUV. Now we get another look at the prototype, but the bodywork seems less suggestive of a Chevy, and more of a Buick. This vehicle definitely still appears to be based on the Bolt, rather than on another small GM platform. In the photos of it next to the current model, the size, wheelbase and profile are extremely similar. There are differences, though. The nose isn't as sloped or as rounded, and the rear window kicks up a little earlier. The biggest changes are in the front and rear fascias, and it's here that we see hints of Buick. There are prominent air inlets on each side of the front bumper that give the car a more aggressive look. The headlights still have a fairly rounded, organic look, but with little extensions like fangs underneath. The styled running-light section, rounded shape and the smoked lenses seem very Buick-like. The grille features a large badge that doesn't fit the shape of a bow-tie, and is more that of a round logo like Buick's. Around at the back, the full-width taillights stand out, and in the middle there is obviously a round badge, again like a Buick. The wide taillights would also be a natural evolution of Buick's current light design language that uses somewhat wide and thin lights. The rear bumper has been redesigned with new lower taillights. Now that we've established that this seems very much like a Buick, we don't think we'll see this particular version offered here with the badge. This is more likely a Buick version of the Bolt for the Chinese market, where the brand is associated with luxury and has been the spearhead for GM's electric and hybrid models. In fact, the Chevy Volt hybrid was sold there as the Buick Velite 5, which was part of a family of a electrified Velite models. This would probably also carry a Velite badge as well. While we might not see this specific Buick variant, we probably will see it offered as a Chevy in some form. With its more aggressive, crossover shape, it could be the rumored EUV model. Or it could be just a refresh of the current Bolt, since the model has been largely unchanged since its introduction for the 2017 model year. And extrapolating from this prototype, we can see how the headlights could be tweaked to tie into those air scoops as on the Suburban and Silverado.

2017 Buick LaCrosse an evolution of sharp Avenir concept

After years as a bloated, uninspiring, but comfortable near-premium sedan, Buick has taken the wraps off a leaner, lither, far more stylish LaCrosse. The third-generation model has just made its debut at the 2015 Los Angeles Motor Show. While there's a lot to talk about, let's first address the new, Avenir-inspired sheetmetal. The fascia is basically the concept car smoothed over into production form, featuring the same winged trishield. In place of the chrome-trimmed waterfall, the LaCrosse gets a blacked-out, recessed grille with a chrome surround. It looks good in photos but it's better in person, adding a real sense of complexity and depth to the front end. The headlights and lower fascia, meanwhile, adhere closely to the concept. The same cannot be said of the LaCrosse's tail. While the taillight lighting pattern is similar, the overall shape of the lighting element is radically different, refining the design featured on the back of the Regal. Also gone, sadly, is the Avenir's boattail rear deck. Instead, the LaCrosse gets a small rear deck that curves up into a pleasant duckbill spoiler. The rest of the tail is pleasantly restrained. Perhaps the weakest point is the profile, where Buick has instituted a "split-spear" design, featuring a strong shoulder line above the rear wheel well, which sits below an even stronger character line that curves down and towards the front of the car. It strikes us as just a little too much, like the Impala. Underneath that sheetmetal, Buick has managed to trim nearly 300 pounds of body fat, nearly half of which came from the vehicle's actual structure. That 300 lbs, according to Buick's engineers, is equivalent to a Kenmore side-by-side refrigerator, in case you needed a helpful comparison. Despite the weight savings, Buick has upped the torsional rigidity for this new model by 15 percent. The LaCrosse's cabin features a strong, cockpit-like design, with a high, floating-bridge center console. This is possible due to Buick's adaption of the Electronic Precision Shift system, introduced earlier this month on the new Cadillac XT5. Despite the new-fangled console design, Buick's retained the wraparound cabin style introduced on the second-gen model. Based on a quick crawl around the interior, space is great in front, although ingress in back is somewhat difficult due to the roofline. You're probably wondering why we haven't said anything about the mechanicals just yet.

2018 Buick Regal GS First Drive Review | More power, style and doors

During our test-drive of the 2018 Regal GS, Buick took us to Atlanta Motorsports Park and hired stunt drivers to teach us mild-mannered journalists how to do a J-turn. It's an emergency maneuver, also known as a Rockford, in which the car reverses at full speed, spins 180 degrees and takes off in the exact opposite direction from where it was headed. It symbolized perfectly Buick's hopes for the Regal GS, its most ambitious attempt yet at a bona fide American sports sedan. Buick is trying to shake off decades of stigma as a maker of grandpa-spec wafters. Since 2008, it has been rebadging the Opel Insignia, developed by GM's German subsidiary and built in Russelsheim, as the Regal. In 2012, Buick revived the Regal GS badge, providing power from a 2.0-liter turbo four, initially at 270 horsepower but then detuned to 259 hp in 2014 as AWD was introduced. Buick had high hopes of challenging the luxury greats, and while the previous Regal GS received good reviews as a genuine sports sedan, it never really caught on in the marketplace. Buick took a risk by redefining the brand, but ultimately, it wasn't quite successful enough to be uttered in the same breath as BMW, Mercedes-Benz and Lexus. The 2018 Regal GS doubles down on that lofty goal with a better-fleshed-out version of the outgoing car. It returns with improved styling and even more power, courtesy of a naturally aspirated 3.6-liter V6 generating 310 horsepower and 282 lb-ft of torque. In other words, the new GS is up 40 horses, but down 13 lb-ft with an engine that comes straight from the GM parts bin. Within GM, it is known as the "High Feature" engine, used in everything from Cadillacs to V6 Camaros to the GMC Acadia. Autoblog has knocked this engine on refinement but generally praised its power, so it's a mixed bag. On the Regal GS, though, the drivetrain exhibited a marked improvement on the refinement front. Buick spokesperson Stuart Fowle attributed this to the new nine-speed automatic it's mated to, a quick and smooth-shifting transmission well-programmed to keep the engine at optimal revs. The result deviates quite a bit from the Opel Insignia, which maxes out with a turbocharged 2.0-liter inline-four good for 197 horses and 300 lb-ft. With turbo 2.0-liter fours now the de facto entry-level engine for most luxury carmakers, having the 3.6-liter V6 makes the 2018 Regal GS more distinctive, a bit more American and less of a European copy-paste job than its predecessor.