2000 Buick Regal Ls Sedan 4-door 3.8l on 2040-cars

Auto blog

Junkyard Gem: 1984 Buick Skyhawk Custom Sedan

Many laughed in 1982 when GM's Cadillac Division began selling the Cimarron, essentially a luxed-up Chevy Cavalier, at about twice the Cavalier's price. One rung below Cadillac on GM's Ladder of Success, the Buick Division got its own version of the Cavalier at the same time: the Skyhawk. Nobody laughed at the 1982-1989 Skyhawk's respectable sales figures. We saw an '85 Skyhawk coupe in a California boneyard last winter, and now here's an example of the sedan version in Colorado. This was the second generation of the Buick Skyhawk name, the first being applied to a Buick-ized version of the Chevrolet Monza during the 1975-1980 model years. That Skyhawk was available solely as a sleek two-door hatchback. This generation of Skyhawk could be purchased in coupe, sedan, hatchback (1986-1987 only) and wagon (1983-1989 only) form, with the coupe proving to be the most popular. For the 1984 model year, the base Skyhawk engine was the 2.0-liter pushrod four-cylinder from the Cavalier, rated at 86 horsepower and 110 pound-feet. If you opted for a five-speed manual or three-speed automatic transmission instead of the base four-on-the-floor manual, you could spend an extra 50 bucks (about 149 bucks in 2023 money) to get this higher-revving, Opel-designed/Brazilian-made 1.8-liter SOHC four-banger with 84 horsepower and 102 pound-feet. A turbocharged version of this engine with 150 horses was available on the Skyhawk T-Type. Buick was proud of both the overhead cam and the electronic fuel injection in this car, applying these badges to brag a bit. You'd have thought that a buyer sacrificing torque for a better-breathing engine would have selected a manual transmission, but such was not the case with this car. The three-speed TH125 slushbox cost $395, or about $1,179 after inflation. The cheapest '84 Skyhawk trim level was the Custom. The MSRP on this car was $7,345 ($21,922 now) before options. Its Chevy Cavalier sibling started at $6,214 ($18,546 today), while its Pontiac 2000 Sunbird and Olds Firenza counterparts were $6,791 and $7,293, respectively ($20,268 and $21,766 in 2023 dollars). Meanwhile, the King of J-Bodies, the Cadillac Cimarron, listed at $12,605 ($37,620 today) in 1984. That $7,345 sticker price didn't include plenty of features we now take for granted in new cars. If you wanted air conditioning in your new Skyhawk, as nearly every Buick buyer in 1984 did, the cost was $630 ($1,880 after inflation).

Chevy Bolt-based prototype may be a Buick EV for China

Late last spring, we got a look at a GM prototype that was clearly based on the Chevy Bolt EV, but with updated styling. It seemed like it could be a more crossover-styled Bolt, given the recently trademarked name of EUV. Now we get another look at the prototype, but the bodywork seems less suggestive of a Chevy, and more of a Buick. This vehicle definitely still appears to be based on the Bolt, rather than on another small GM platform. In the photos of it next to the current model, the size, wheelbase and profile are extremely similar. There are differences, though. The nose isn't as sloped or as rounded, and the rear window kicks up a little earlier. The biggest changes are in the front and rear fascias, and it's here that we see hints of Buick. There are prominent air inlets on each side of the front bumper that give the car a more aggressive look. The headlights still have a fairly rounded, organic look, but with little extensions like fangs underneath. The styled running-light section, rounded shape and the smoked lenses seem very Buick-like. The grille features a large badge that doesn't fit the shape of a bow-tie, and is more that of a round logo like Buick's. Around at the back, the full-width taillights stand out, and in the middle there is obviously a round badge, again like a Buick. The wide taillights would also be a natural evolution of Buick's current light design language that uses somewhat wide and thin lights. The rear bumper has been redesigned with new lower taillights. Now that we've established that this seems very much like a Buick, we don't think we'll see this particular version offered here with the badge. This is more likely a Buick version of the Bolt for the Chinese market, where the brand is associated with luxury and has been the spearhead for GM's electric and hybrid models. In fact, the Chevy Volt hybrid was sold there as the Buick Velite 5, which was part of a family of a electrified Velite models. This would probably also carry a Velite badge as well. While we might not see this specific Buick variant, we probably will see it offered as a Chevy in some form. With its more aggressive, crossover shape, it could be the rumored EUV model. Or it could be just a refresh of the current Bolt, since the model has been largely unchanged since its introduction for the 2017 model year. And extrapolating from this prototype, we can see how the headlights could be tweaked to tie into those air scoops as on the Suburban and Silverado.

The new Opel Insignia might be a great Buick, but it's a sad Holden Commodore

Since the first shots of the uncovered Opel Insignia hit our inboxes, we've been filled with excitement for the new sedan. It looks great, it should come to America with little to no visual changes as the Buick Regal, and we might even get a wagon version. Unfortunately, there's a lead lining to this silver cloud, and it comes to us from Down Under. You see, the Opel Insignia is also undergoing a re-badging job in Australia to become the new Holden Commodore. It's replacing the beloved rear-drive Commodore (with an optional V8 and ultra-high performance HSV variants) with a front-drive-based platform offering four- or six-cylinder engines. This is depressing news considering the Zeta-platform underpinning the Commodore VF spawned the Pontiac G8, Chevrolet SS, and fifth-generation Camaro. Knowing this was going to happen doesn't help much either. What makes it all worse is that the new Commodore doesn't have a shred of unique styling in the bodywork. That's not an exaggeration. A new grille with a Holden lion badge instead of an Opel lightning bolt badge is the only change. See for yourself in the Insignia gallery below. Not only did GM erase a unique Australian model, it didn't even allow the brand to give the car a distinct shape. It's sort of like when Ford planned to replace the Mustang with the Mazda-derived Probe. The Probe wasn't that bad for the time, but it was no Mustang. At least in that case the Mustang survived. View 12 Photos Before we get ourselves too down, we should mention that there are reasons to be hopeful for the future. For one thing, the new all-wheel-drive Commodore/Insignias will come with a version of the GKN-developed rear differential found in the Focus RS and Range Rover Evoque, which is pretty neat on its own. And Opel/Vauxhall have always had wild performance versions of the Insignia and its Vectra predecessor. The last one made 325-horsepower and had all-wheel-drive. A new one would likely produce much more, since one of the available V6s makes 308 horsepower. Then imagine all of that extra hypothetical horsepower hooked up to the all-wheel-drive system that introduced us to "drift mode." Not only that, but rear-drive Holdens may not be completely dead yet. A Belgian man announced his intention to buy an old Holden factory along with the tooling and rights for the car once it was discontinued. His plan is to continue producing the old model after Holden is done with it.