2014 Buick Lacrosse Leather on 2040-cars

Auto blog

Spy photos of the upcoming Buick Regal wagon, via the Opel Insignia

We're pretty sure Buick is working on a Regal wagon. And because the Regal is the Opel Insignia on the other side of the pond, these spy photos show us what's in store when it eventually turns into a Buick. The rakish wagon was lightly camouflaged, giving us our best look at the upcoming vehicle. The wagon shares a lot of the same design cues as the Insignia sedan that we spotted earlier. The bottom of the front end is covered in heavy camouflage, masking the wagon's grille. It's unsure to tell whether the black nostril-like pieces sitting above the grille are vents or just tape. The prototype still shares the same upright nose as the model we spotted earlier, giving the wagon a wider stance than its predecessor. The side profile of the wagon is sleeker, thanks to the extra four inches between the axles, than the current model is, with the design mimicking that of a shooting brake instead of a traditional wagon. The rear end of the wagon is also more upright with the taillights and bottom part of the fender jutting out beyond the glass. The boxy design sitting atop of the rear end doesn't match the rest of the vehicle and appears to be a part of the car's camouflage. With the tunnel-like design at the top gone, the rear end would have a more streamlined design. With the next Regal expected to continue on as a rebadged Insignia, the likelihood of a Regal Wagon in the US look good, but aren't set in stone. Late last year, Buick filed two trademarks for "Tourx" and "Regal Tourx," pointing towards a high-riding wagon with all-wheel drive. Imagine these spy shots with a taller suspension and some crossover-inspired trim pieces and you have a wagon that could take on the likes of the Subaru Outback and Audi Allroad. Related Video: Featured Gallery 2018 Opel Insignia Grand Sport Tourer Spy Shots View 10 Photos Image Credit: CarPix Design/Style Spy Photos Buick GM Opel Wagon Luxury opel insignia

2018 Buick Regal's base price is almost $2,500 cheaper than last year's

Along with the launch of the Buick Regal GS, Buick released official pricing for all three versions of the Regal, and they're very competitively priced, especially the Sportback. The part-sedan, part-hatch Regal Sportback starts at just $25,915. That's more than $2,000 cheaper than the previous generation 2017 Buick Regal sedan, which started at $28,385. Along with the savings in cost comes a standard turbocharged 2.0-liter four-cylinder making 250 horsepower and 260 pound-feet of torque - 295 pound-feet with optional all-wheel drive. That's a significant step up from the standard naturally aspirated engine in the previous-generation Regal that makes just 182 horsepower and 172 pound-feet of torque. The new Regal's hatch also provides more flexibility for loading cargo, and the cargo space expands from 14.2 cubic feet in the old model to 31.5. View 12 Photos The TourX wagon, or crossover depending on your opinion, comes with a $4,000 premium over the Sportback, with a base price of $29,995, matching what was revealed last month. It gains only about an extra cubic foot behind the rear seats, but with the seats folded, it has 73.5 cubic feet to play with. It also comes with standard all-wheel drive and the engine with 295 pound-feet of torque. Plus, it has the added ride height and plastic body cladding that gives it the same trendy look shared with the Subaru Outback, Volvo V60 Cross Country, and Audi A4 Allroad. It is a few thousand more than the Outback, but it undercuts the Volvo by roughly $10,000 and the Audi by almost $15,000. Then, for performance, there's the Regal GS. It starts at $39,990 and has a 310-horsepower V6 and standard all-wheel drive. It also features all of the versatility of the regular Regal Sportback. All-in-all, the Buick Regal line seems to pack a lot of value, at least on paper. Related Video:

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.