2008 Buick Lacrosse Cxl V6 Leather Ultra Clean Power Pkg Wood Grain 3.8l on 2040-cars

Auto blog

Buick Enspire spied for the first time, loses concept's electric powertrain

About a year ago, Buick showed a high-performance electric crossover with wide, aggressive, curvy lines that was called the Buick Enspire. Now we have our first look at the production version. While it does seem to be styled like the crossover, it also seems to have lost its electric powertrain in favor of internal combustion. At the front of the crossover, we can clearly see it has the skinny, scowling headlights of the concept sitting high on the front fascia and flush with the hood. The main grille looks like it may be smaller, but it could also just be that the actual open section of the grille doesn't fill up the grille area of the fascia. In profile, the crossover has an attractive long nose, low roof and rising belt line. The rear shows the most change, as the rear pillars are much thicker, and the taillights don't appear to span the full width of the crossover. It's in the rear that we can also see the evidence that the Buick Enspire will actually be gasoline powered. Looking very closely under the rear bumper cover, we can see two exhaust tips turned to face the ground. Based on the size of the crossover, and the fact a Cadillac XT4 was being driven along with the prototype, the Enspire is probably using the XT4's platform, as well as its mechanical bits. That means it probably has a turbocharged 2.0-liter four-cylinder making 237 horsepower and 258 pound-feet of torque. Power will also probably go through a nine-speed automatic to either the front wheels or all four. This prototype looks to be pretty far along, so we'll probably see the production version in about a year. Considering the Enspire's size and likely powertrain, it may even replace the similar Buick Envision. And since the Envision is Buick's worst selling crossover (unless you count the Regal TourX as one), it would be ripe for replacement.

Fingers point to dragged-out NHTSA investigation after second death by ARC airbag inflator

Safety advocates have increased criticism of the federal government's National Highway Traffic Safety Administration after an exploding airbag inflator that's been under investigation for more than six years killed a second person.  On Wednesday, NHTSA posted recall documents filed by General Motors that revealed the second death, the driver of a 2015 Chevrolet Traverse SUV with an inflator made by Tennessee company ARC blew apart, spewing shrapnel. No details were given about where and when the death occurred. NHTSA has said that ARC Automotive of Knoxville has manufactured about 8 million inflators used nationwide in vehicles made by General Motors, Fiat Chrysler (now Stellantis), Kia and Hyundai. “NHTSA should have been all over this along time ago,” said Rosemary Shahan, president of California-based Consumers for Auto Reliability and Safety. “There's just no denying that itÂ’s a (safety) defect.” NHTSA, the agency charged with with keeping America's automobiles and roads safe, began investigating ARC inflators in July of 2015 after two people were injured by flying shrapnel. The investigation became more urgent in 2016, when a Canadian woman driving an older Hyundai Elantra was killed by metal airbag fragments. Public records show only a little progress on the probe. In April, the agency posted a memo in saying it was reviewing volumes of information it received from ARC. Safety advocates such as Shahan say that the dragged-out investigation is an example of the deadly consequences that can result from an understaffed and underfunded agency. The second death should not have happened, Shahan said, and vehicles with faulty ARC inflators should have been recalled faster. The agency, Shahan said, is “grossly underfunded," but it still should have sought recalls of the ARC inflators. She said historically NHTSA has taken little action during Republican administrations but has ramped up safety efforts when Democrats control the White House. Messages were left Wednesday by the Associated Press seeking comment from NHTSA and ARC. At this time, relatively few vehicles are effected. The GM recall covers only 550 Chevy Traverse SUVs from the 2013 through 2017 model years, as well as Buick Enclave SUVs from 2008 through 2017. The automaker said in a statement that the faulty front driver's airbag inflators were either installed at the factory or in replacement airbag modules.

China-market Buick Envista rumored possible replacement for the Encore

Buick currently sells four crossovers, the Encore, Encore GX, Envision, and Enclave. That number will soon be whittled to three, the Encore expected to end production after this model year. If speculation provided by GM Authority is correct, there could be changes afoot in the middle of the line in time for the 2024 model year. Buick has said it will maintain four ICE-powered crossovers, so the brand will need something to fill the coming gap. GMA sources suggest the China-market Buick Envista could get the nod. Buick launched the coupe-esque model across the Pacific in August, a relation to the Chevrolet Seeker that appeared on the Chinese market in April. The Envista debuted the brand's latest design language inspired by pure-electric concepts like the Electra-X and WIldcat. Thin, angled headlights frame a wide, low grille, leading back to a roof that slopes into a high back and double spoilers. GM applied to trademark the Envista name in the U.S. in early 2019, then maintained it with extension requests until earlier this year. Then, in September 2022, the automaker abandoned the application, which could bode ill for whatever chance there was, if any. Another snag could be that the Envista is 182.5 inches long, 71.5 inches wide, and 61.6 inches high on a 106.3-inch wheelbase. Various reports have pitched the Envista to fill the (small) space between the Encore GX and the Envision; however, the Envista falls just 0.10 short of the Envision's length, and it's three inches smaller in every other dimension. On the other hand, the Envista is 11.1 inches longer and 0.1 inch wider than the Encore GX, with a wheelbase 4.1 inches longer. That makes a lot of overlap in the dimensional Venn diagram. Were the Envista to come as-is, it wouldn't so much be a replacement for the Encore as be a different kind of compact SUV from the Envision on a more modern platform. Further speculation from "sources familiar with the matter" says a U.S.-market Envista could get the Avenir treatment. Avenir marks the ultimate in Buick luxury, an appellation currently restricted to the Envision and Enclave. According to a separate report, the Encore GX is also headed into the Avenir club with the compact crossover gets refreshed for the 2024 model year. An Encore GX Avenir would adopt some exterior tweaks like 18-inch alloys, and turn a load of optional equipment available for the Encore GX Essence trim into standard equipment. Related video: