2005 Buick Lacrosse Cxl *low Miles* on 2040-cars

Auto blog

GM follows up Lambda CUV stop-sale with tire recall

In late January, General Motors announced a stop-sale for about 6,281 examples of the 2015 Chevrolet Traverse, GMC Acadia and Buick Enclave because of the possibility for the treads cracking on their 18-inch Goodyear Fortera HL tires. At the time, GM said that this would also eventually lead to a safety campaign to repair the problem, and the National Highway Traffic Safety Administration has just published those details. GM's recall covers 5,876 of the three Lambda platform crossovers to replace their tires. According to NHTSA, if the treads crack, there could be a loss of pressure and possible failure. Goodyear already announced its own recall of the tires after internal testing found small tread cracks. The company did not believe this was safety issue, but the problem did put the rubber out of compliance with federal laws. The business's safety campaign covered an estimated 48,512 tires. Of those, around 32,000 were reportedly made for GM to either be fitted to vehicles or sold as replacements. The remainder went to the aftermarket. Goodyear's portion of the recall is expected to begin around February 20. RECALL Subject : Tire Tread Cracking/FMVSS 110 Report Receipt Date: JAN 28, 2015 NHTSA Campaign Number: 15V044000 Component(s): TIRES Potential Number of Units Affected: 5,876 All Products Associated with this Recall Vehicle Make Model Model Year(s) BUICK ENCLAVE 2015 CHEVROLET TRAVERSE 2015 GMC ACADIA 2015 Details Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2015 Buick Enclave vehicles manufactured December 9, 2014, to January 14, 2015, 2015 Chevrolet Traverse vehicles manufactured December 9, 2014, to January 20, 2015, and 2015 GMC Acadia vehicles manufactured December 9, 2014, to January 16, 2015, and all equipped with Goodyear P255/65R18 Fortera HL tires. These vehicles are equipped with tires that may experience tread cracking. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 110, "Tire Selection and Rims and Motor Home/Recreation Vehicle Trailer Load Carrying Capacity Information for Motor Vehicles with a GVWR of 4,536 kilograms (10,000 pounds) or Less." CONSEQUENCE: If the tire treads crack, a loss of tire pressure and possible tire failure may result, increasing the risk of a crash. REMEDY: GM will notify owners, and dealers will replace the tires that were manufactured within a specific date range, free of charge.

Buick Enspire spied for the first time, loses concept's electric powertrain

About a year ago, Buick showed a high-performance electric crossover with wide, aggressive, curvy lines that was called the Buick Enspire. Now we have our first look at the production version. While it does seem to be styled like the crossover, it also seems to have lost its electric powertrain in favor of internal combustion. At the front of the crossover, we can clearly see it has the skinny, scowling headlights of the concept sitting high on the front fascia and flush with the hood. The main grille looks like it may be smaller, but it could also just be that the actual open section of the grille doesn't fill up the grille area of the fascia. In profile, the crossover has an attractive long nose, low roof and rising belt line. The rear shows the most change, as the rear pillars are much thicker, and the taillights don't appear to span the full width of the crossover. It's in the rear that we can also see the evidence that the Buick Enspire will actually be gasoline powered. Looking very closely under the rear bumper cover, we can see two exhaust tips turned to face the ground. Based on the size of the crossover, and the fact a Cadillac XT4 was being driven along with the prototype, the Enspire is probably using the XT4's platform, as well as its mechanical bits. That means it probably has a turbocharged 2.0-liter four-cylinder making 237 horsepower and 258 pound-feet of torque. Power will also probably go through a nine-speed automatic to either the front wheels or all four. This prototype looks to be pretty far along, so we'll probably see the production version in about a year. Considering the Enspire's size and likely powertrain, it may even replace the similar Buick Envision. And since the Envision is Buick's worst selling crossover (unless you count the Regal TourX as one), it would be ripe for replacement.

Buick Wildcat EV concept previews the future of the brand

Once again, Buick has revealed a drop-dead stunner of a coupe concept, the Wildcat EV. And just like the Avista that came before it, don't get your hopes up too high for a production model. Buick hasn't said "no," but they haven't said "yes," either. But unlike the Avista, the Wildcat does give us a look at where Buick is going as far as styling, branding and technology. Also, did we mention it's freaking gorgeous? The Wildcat EV started out as a sketch by a Buick designer that caught the eye of the department, simply because it was really cool. The team started developing it further, and eventually the brand gave the go-ahead to bring it to the full-size concept you see here. It is purely a design concept, so although it's an EV by name, it doesn't have any kind of production powertrain or real specs. But it is designed with electric power in mind, as evidenced by the extremely long wheelbase and short overhangs. And this translates into Buick's electric future. The brand plans to be fully electric by 2030, and its first EV will launch in 2024 as a 2025 model. The shape of the coupe is very clean, simple and organic, but with interesting creases and intersections scattered throughout. It has wide haunches and a low, pointy nose. The grille is pushed down and made wide, which accentuates the shape of the car. The badge now sits atop the bumper, too. The greenhouse has blacked-out front pillars to create a wraparound look, and the roof has a gentle slope toward the rear. It incorporates a glass hatch, and the taillights blend into the glass and extend all the way up the rear pillars. While Buick isn't making a commitment either way for the Wildcat EV, these styling cues will appear on future Buick models. So imagine the front and rear fascias, the window treatment and sheetmetal detailing, but on other bodystyles, likely crossovers and SUVs. In fact, Buick said it has two models it will reveal later this year with some styling based on the Wildcat. Before we get too far from design, we should also highlight other cool aspects of the Wildcat EV concept. The wheels are turbine shaped as a throwback to Jet Age design and optimism. Each wheel took two months to produce and finish. The doors on the Wildcat are conventional, except for the gull-wing upper panels. They open up to make ingress and egress easier. And the interior is a gorgeous, mid-century-modern design.