1982 Buick Grand National Very Rare One Of 215 All Original And Complete on 2040-cars

Auto blog

2021 Buick Encore sheds top two trims, offer only Base and Preferred

A few days ago, CarsDirect reported that the 2021 Buick Encore would prune its top two trims, the Sport Touring and Essence variants. Paring those two trims would leave the Base and the Preferred, creating larger price and amenities differences between the stalwart Encore and the new, larger, nicer Encore GX. It turns out the change has already gone into effect for the 2020 model year, as shown in Encore's Build & Price page at the brand's web site. Now the only trims available are the 1SV and Preferred. The prices for these trims won't change for next year, either. The Encore will start at $24,195 after a $995 destination charge, and now topping out at $26,215 for the all-wheel drive Preferred model. Previously, the Essence AWD established the top of the hill at $31,795. The move eliminates almost all of the MSRP overlap with the Encore GX, which ranges from $25,195 to $31,595. There will be less feature overlap, too. The now-dead Encore trims opened the door to proper luxury amenities like LED headlights, leather seats, dual-zone climate control, and an auto dimming rear-view mirror. The amenities available on the Preferred are limited to floor mats and accessories, save for the $495 Safety Package that adds Rear Cross Traffic Alert and Side Blind Zone Alert, and the $300 Remote Start. The Encore GX comes in three trims, Preferred, Select, and Essence, and "Leather-appointed seating" doesn't appear until the top-dollar Essence trim for $29,495 in FWD fettle.  The closest the Encore and Encore GX will get to one another is in engine output. The smaller crossover comes only with a 1.4-liter turbocharged four-cylinder that makes 138 horsepower and 148 pound-feet of torque. The Encore GX offers two engines depending on powertrain. A 1.2-liter turbocharged three-cylinder with 137 hp and 166 lb-ft comes solely with front-wheel drive, and a 1.3-liter turbocharged three-cylinder with 155 hp and 174 lb-ft is available with either front- or all-wheel drive. Related Video:    

2024 Buick Encore GX Cupholder Mega Test: Will the Nalgene bottle fit?

I recently reviewed the 2024 Buick Encore GX in its new Avenir trim, appreciating the updates from its mid-cycle refresh and assessing its comfortable driving style. What I didn't dive into, however, were the cupholders. Specifically, I wanted to know if it could accommodate in a convenient location what is my favorite hydration facilitator, a 32-ounce Nalgene water bottle. This, like other oversized water bottles, often can't find a cupholder that will fit it. Its a particularly American problem (we're more obsessed with cupholders than other markets), so can this American budget-luxury crossover satisfy my own obsession with this big, dumb bottle? Let's find out. Ideally, we could put it in the front cupholders. Few vehicles' cupholders are big enough, though, with the Chrysler Pacifica, Lexus GX and Toyota 4Runner being notable exceptions. We can't add the Encore to that list, unfortunately. The cupholders are far too small. Usually, the second best option, if possible, is to put it in the front door pocket. Voila! It fits. No Nalgene rolling around on the front passenger seat in this Buick. But what about in back? The center armrest in the Encore GX is a fine place to rest one's elbow, but what about a big-ass bottle of water? Alas, the rear cupholders are equally dinky as the ones up front, which is often the case. The last-gen Toyota Tundra was an exception, where the rear cupholders were bigger than those up front which is super weird to me. I'mm looking forward to see what's what with the new Tundra. The rear door pockets are much smaller than those up front. This does not look promising. It's just big enough that I can wedge the bottom of the bottle inside, but not big enough to keep it there when the car is in motion. Sorry backseaters, you'd better settle for your lesser bottles, suckers. I had almost overlooked this little cubby in between the front cupholders and center console armrest. It's an odd shape, but with some luck, the Nalgene will fit. That's the ticket! This is even better than putting it in the door. It's not the most secure fit, but it's not so huge a space that the bottle knocks around and falls over with every input to the steering wheel or pedals. This ended up being where I put the Nalgene every time I drove the Encore GX, and, subsequently, I remained content and adequately hydrated. And the cupholders remained open for alternative beverages. Interested in more than just the cupholders?

2017 Buick LaCrosse an evolution of sharp Avenir concept

After years as a bloated, uninspiring, but comfortable near-premium sedan, Buick has taken the wraps off a leaner, lither, far more stylish LaCrosse. The third-generation model has just made its debut at the 2015 Los Angeles Motor Show. While there's a lot to talk about, let's first address the new, Avenir-inspired sheetmetal. The fascia is basically the concept car smoothed over into production form, featuring the same winged trishield. In place of the chrome-trimmed waterfall, the LaCrosse gets a blacked-out, recessed grille with a chrome surround. It looks good in photos but it's better in person, adding a real sense of complexity and depth to the front end. The headlights and lower fascia, meanwhile, adhere closely to the concept. The same cannot be said of the LaCrosse's tail. While the taillight lighting pattern is similar, the overall shape of the lighting element is radically different, refining the design featured on the back of the Regal. Also gone, sadly, is the Avenir's boattail rear deck. Instead, the LaCrosse gets a small rear deck that curves up into a pleasant duckbill spoiler. The rest of the tail is pleasantly restrained. Perhaps the weakest point is the profile, where Buick has instituted a "split-spear" design, featuring a strong shoulder line above the rear wheel well, which sits below an even stronger character line that curves down and towards the front of the car. It strikes us as just a little too much, like the Impala. Underneath that sheetmetal, Buick has managed to trim nearly 300 pounds of body fat, nearly half of which came from the vehicle's actual structure. That 300 lbs, according to Buick's engineers, is equivalent to a Kenmore side-by-side refrigerator, in case you needed a helpful comparison. Despite the weight savings, Buick has upped the torsional rigidity for this new model by 15 percent. The LaCrosse's cabin features a strong, cockpit-like design, with a high, floating-bridge center console. This is possible due to Buick's adaption of the Electronic Precision Shift system, introduced earlier this month on the new Cadillac XT5. Despite the new-fangled console design, Buick's retained the wraparound cabin style introduced on the second-gen model. Based on a quick crawl around the interior, space is great in front, although ingress in back is somewhat difficult due to the roofline. You're probably wondering why we haven't said anything about the mechanicals just yet.