Premium Suv 3.6l Awd Leather Remote Start Dvd System Moonroof Warranty Onstar on 2040-cars

Auto blog

Junkyard Gem: 1978 Buick Skylark Sedan

Around the time that OPEC shut off the oil taps, The General realized that it was time to sell more small cars from GM divisions not previously known for such machines. The logical candidate for this project was the Chevrolet Nova, a rear-wheel-drive compact that shared much of its chassis design with the Chevrolet Camaro and Pontiac Firebird. The Nova-based Pontiac Ventura came out in the 1971 model year, and the Buick and Oldsmobile Divisions began producing their own badge-engineered Nova siblings for 1973 (Cadillac was late to the party, but eventually created the Nova-based Seville for 1976). At first, the Buickized Nova got Apollo badges, but the better-known Skylark name was applied to these cars for the 1975 through 1979 model years. Today's Junkyard Gem is one of those Nova-based Skylarks, found in a Denver self-serve yard. From the 1964 through 1972 model years, the Skylark lived on the A-Body chassis and was sibling to the Chevrolet Chevelle/Malibu, Pontiac LeMans/Tempest/GTO, and Oldsmobile Cutlass/442. After the 1975-1979 rear-wheel-drive X-Body phase, the Skylark name then went onto the unrelated front-wheel-dive X-Body chassis developed for the Chevrolet Citation. It's a Nova, sure, but Buick made sure that it had a bit more swank than its Chevy counterpart. Checked seat fabric with big square buttons! The base engine in the '78 Skylark was the 3.8-liter Buick V6, rated at 110 horsepower. GM had invested in a new crankshaft design for this engine the year before, so it no longer had the "odd-fire" cut-down V8 crankshaft that shook the fillings out of so many drivers' teeth in earlier years. An assortment of low-compression V8s from Oldsmobile, Chevrolet, Pontiac, and Buick were available as optional equipment as well, eventually leading to the "Chevymobile" lawsuits of a few years later. The base transmission in this car was a three-speed manual (I'm not sure if you could still get a three-on-the-tree column-shift manual Skylark in 1978, but a three-on-the-floor manual was available for sure). The very last three-on-the-tree car Americans could buy was the '79 Nova and its Olds Omega/Pontiac Phoenix siblings, while the final three-on-the-floor cars were the '81 Malibu and siblings. This car has the optional three-speed automatic.

2024 Buick Envision reportedly delayed, stripped of Super Cruise

It appears the Chevrolet Traverse isn't the only GM product trying to climb out of production hell. Remember, Chevy had to delay the start of production for the all-new third-generation 2024 Traverse, leading to the second-gen 2023 model carrying over for a brief spell as the Traverse Limited until the all-new SUV comes off the line in real numbers. According to GM Authority, Buick is in similar straits with the 2024 Envision. The automaker showcased a range of subtle cosmetic updates and some tech enhancements for the SUV over the summer, providing enough detail to be a little more than a tease, a little less than a debut. At that time, the 2024 Envision was meant to be on sale before the end of this year. Now GMA says the market launch for the 2024 Envision has been pushed back to late 2024 for as-yet-unknown reasons. This timeline marks the third delay. Just one month after the June reveal online, GMA wrote that the original October date for the start of production had been moved to December 11. Dealers began submitting orders at the end of September in anticipation of October production. Sometime after the October deadline passed, a November update claimed production would commence in the first quarter of 2024. We imagine the late 2024 date could move again, perhaps forward; that's a year out, it's possible GM gets good news before then. What's more, GMA also reports the 2024 Envision won't come with Super Cruise. This was going to be the first Buick with GM's hands-off driving feature, but again, for undisclosed reasons, plans have changed.  What we're pretty sure we can expect whenever the refreshed Envision arrives is a new front end with a bigger grille positioned lower on the front fascia, bright trim, and the new Buick emblem on the hood. The headlights are now integrated into the bumper, LED daytime running lights replace the outgoing Envision's headlights. The revamped look brings the Envision in line with other recent additions to the Buick range, like the Encore. Because Buick released a single photo for the summer reveal, we still have no idea what the Envision's back end and interior look like. The change in plans could mean a reworked trim lineup for the holdover. According to early figures from Autodata, the 2024 Envision will only come in three all-wheel-drive trims, Preferred, Sport Touring, and Avenir. This change would eliminate all the front-wheel-drive trims available in 2023 across the Preferred, Essence, and Avenir trims.

GM reportedly developing 2.5-liter turbo four-cylinder

General Motors is allocating a massive amount of resources to developing electric technology, but it's not forgetting about the gasoline-powered cars that make up the bulk of its sales. It's reportedly designing a new 2.5-liter turbocharged four-cylinder engine based on its 2.7. Citing "sources familiar with the matter," enthusiast website GM Authority wrote that the 2.5-liter four is "in [the] final stages of development," meaning it should be announced sooner rather than later (assuming the report is accurate). Technical details are few and far between as of writing. The publication learned that the 2.5 will be part of the Cylinder Set Strategy (CSS) family of engines and that it will be mechanically related to the 2.7-liter currently found in the Chevrolet Silverado 1500, among several other models. It will feature dual overhead camshafts. It's too early to tell which models the 2.5-liter four-cylinder will end up in, or how much power it will generate. The output will likely depend on the application. For context, the 2.7 delivers 310 horsepower at 5,600 rpm and 348 pound-feet of torque between 1,500 and 4,000 rpm in the Silverado. In the smaller Colorado, it provides anywhere between 237 and 310 horsepower depending on the trim level selected. While this is pure speculation, our crystal ball tells us the engine will end up powering crossovers. It's an easy deduction to make. We can't imagine it will be offered in the Silverado, and seeing it in the Colorado is unlikely because its entry-level engine develops 237 horsepower; there's likely not much of a market for a midsize truck with 200 or so horsepower. Putting it in the Corvette wouldn't make sense and the Camaro has nearly reached the end of its life cycle without a successor planned. This leaves us with Chevrolet's range of crossovers, like the Equinox, as well as their GMC-, Buick-, and Cadillac-branded counterparts. We're not discounting the possibility that the cars set to receive the 2.5 haven't been unveiled, but those are likely crossovers, too; the odds of seeing another big Chevy sedan are very, very low. General Motors hasn't commented on the report, and it hasn't publicly announced plans to expand its CSS family of engines. If the report is accurate, we should learn more about the new turbocharged, 2.5-liter four-cylinder engine in the not-too-distant future. Featured Gallery 2022 Chevrolet Equinox RS View 56 Photos Buick Chevrolet GM GMC