1957 Buick Century Caballero Wagon on 2040-cars

Auto blog

GM cutting vehicle trim options to save money for electrification

Information continues to filter out about GM's plans based on comments the automaker made during its Capital Markets Day event in February. GM President Mark Reuss said the company's push to save money by rationalizing the number of build combinations will continue in 2020, carrying on the work done in 2019. As GM Authority covers, last year, the carmaker cut 3,500 components across model lines, a 12% drop in the number of parts it needed to stock in its plants. Reuss used the next-generation Chevolet Equinox and GMC Terrain as examples for more cost efficiencies, saying build possibilities — which include international markets and their options — will be cut by more than 50%, and use more shared parts. "We will reduce total trim levels on Equinox and Terrain from eight to six," Reuss said, "reduce engine variants from 11 to 5, reduce build combinations from more than 200 to less than 100 per program, and see significant cost savings of an already paid-for architecture that took the mass out, helping us self-fund electrification programs." GM will plow a large amount of the money it saves into its ambitious EV program. In 2017, the automaker said it intends to have 20 electric vehicles on the market by the end of 2023, some of which could be shared between brands. An automotive analyst at Seeking Alpha and a piece in Automobile attempted to put specifics to what we should expect. As Automobile points out, the first two EVs in the 20-car program are already on sale, being the Ariv Meld and Ariv Merge eBikes available in Belgium and The Netherlands. We've seen the Cruise Origin autonomous rideshare taxi, although we don't know when it will hit the road. The next three, which we should see in the metal shortly, are two Cadillac EVs and the GMC Hummer EV pickup. The Cadillac pair are expected to be sized like the XT4 and XT5, and along with the Hummer, should hit the market starting in late 2021.

Buick really wants us to know the new Cascada convertible won't leak

Quality testing on the factory floor is nothing to joke about. Automakers need to make sure the work being done is up to snuff, and that means some extensive checks. For Buick, that means using a lot of water for each of its Cascada convertibles. Each vehicle that rolls off the floor is subject to a high-pressure, ten-minute soaking that sprays nearly 20 gallons of water from each nozzle during every bath, just to guarantee the fabric roof hasn't sprung any leaks. For some reason, Buick has chosen to show off this testing with the help of what we imagine is the Gorton's Fisherman's baby cousin. Check out the strange testing video, available up top.

Junkyard Gem: 1962 Buick Electra 225 4-Door Sedan

Buick built its first Electras as 1959 models, with Electra production continuing unabated through 1990 (after which the Park Avenue trim level took over as the model name, much as the Malibu trim level designation had shoved aside the Chevelle model name in 1978). Some of the handsomest Electras were the second-generation models, built for the 1961-1964 model years, and today's Junkyard Gem is one of those cars. I'd always assumed that the Buick Electra took its name from the daughter of Clytemnestra and Agamemnon in Greek mythology, because the people who named cars back then were forced to read Euripides and Sophocles as undergrads. In fact, the car was named after Electra Waggoner Bowman Biggs, a Texas heiress and sculptor who married the brother-in-law of Harlow Curtice, who ran the Buick Division before being promoted to president of General Motors in 1953. How did she feel when the last Electra rolled off the assembly line in 1990? The junkyard is full of history, if you know where to look. The 1959-1960 Electra had enormous tailfins, angled something like the ones seen on the same-year Chevrolet Impalas. This Electra generation ditched the fins but kept much of the general Space Age spirit of its predecessor. The Electra lived on the same platform as the Cadillac DeVille and Oldsmobile 98 from start to finish, and it was the most expensive Buick available in 1962. The MSRP of this one was $4,051, or about $41,462 in 2023 dollars. The engine in this one was present when it arrived at U-Pull-&-Pay, but a junkyard shopper grabbed it within a couple of days of arrival. It would have been a 401-cubic-inch (6.5-liter) "Nailhead" V8, rated at 325 horsepower and a whopping 445 pound-feet of torque (keep in mind that these are gross, not net, power numbers). The Nailhead's small valves meant that it wasn't much good for high-rpm use, but its big torque was perfect for moving two-ton land yachts. The final Nailheads were installed in 1966 Buicks. Every production Electra ever built came with an automatic transmission, and the 1959-1963 models received the extremely smooth and alarmingly inefficient Dynaflow (known as the Dual-Path Turbine Drive for 1962). Originally developed for use in the 1943 M18 Hellcat tank destroyer, the Dynaflow was considered a two-speed automatic but drove more like a CVT with two selectable drive ranges.