2014 Buick Verano Base on 2040-cars

Auto blog

Junkyard Gem: 1962 Buick Electra 225 4-Door Sedan

Buick built its first Electras as 1959 models, with Electra production continuing unabated through 1990 (after which the Park Avenue trim level took over as the model name, much as the Malibu trim level designation had shoved aside the Chevelle model name in 1978). Some of the handsomest Electras were the second-generation models, built for the 1961-1964 model years, and today's Junkyard Gem is one of those cars. I'd always assumed that the Buick Electra took its name from the daughter of Clytemnestra and Agamemnon in Greek mythology, because the people who named cars back then were forced to read Euripides and Sophocles as undergrads. In fact, the car was named after Electra Waggoner Bowman Biggs, a Texas heiress and sculptor who married the brother-in-law of Harlow Curtice, who ran the Buick Division before being promoted to president of General Motors in 1953. How did she feel when the last Electra rolled off the assembly line in 1990? The junkyard is full of history, if you know where to look. The 1959-1960 Electra had enormous tailfins, angled something like the ones seen on the same-year Chevrolet Impalas. This Electra generation ditched the fins but kept much of the general Space Age spirit of its predecessor. The Electra lived on the same platform as the Cadillac DeVille and Oldsmobile 98 from start to finish, and it was the most expensive Buick available in 1962. The MSRP of this one was $4,051, or about $41,462 in 2023 dollars. The engine in this one was present when it arrived at U-Pull-&-Pay, but a junkyard shopper grabbed it within a couple of days of arrival. It would have been a 401-cubic-inch (6.5-liter) "Nailhead" V8, rated at 325 horsepower and a whopping 445 pound-feet of torque (keep in mind that these are gross, not net, power numbers). The Nailhead's small valves meant that it wasn't much good for high-rpm use, but its big torque was perfect for moving two-ton land yachts. The final Nailheads were installed in 1966 Buicks. Every production Electra ever built came with an automatic transmission, and the 1959-1963 models received the extremely smooth and alarmingly inefficient Dynaflow (known as the Dual-Path Turbine Drive for 1962). Originally developed for use in the 1943 M18 Hellcat tank destroyer, the Dynaflow was considered a two-speed automatic but drove more like a CVT with two selectable drive ranges.

Buick Riviera Concept debuts in China

It's nighttime in China, and Buick has just concluded an evening event the day before the first - and only - press day of the Shanghai Motor Show. The star of this evening's party was the Buick Riviera concept vehicle, a plug-in electric hybrid coupe that the automaker says gives a glimpse at its future design direction, not to mention resurrecting some nomenclature from the brand's history that includes a similarly named concept from 2007.
The shape of the Riviera is said to be inspired by water. While the traditional Buick "waterfall" grille is present, the front end gains a more aggressive note thanks to what appear to be vertical air inlets below each headlight.
As for the concept's drivetrain, Buick says it uses General Motors' new dual-mode wireless plug-in hybrid electric vehicle propulsion system, or W-PHEV for short. The keyword there is 'wireless,' as the Riviera can charge its onboard battery packs with a traditional cable or wirelessly via a "sensory recharge panel" underneath the car.

5 reasons why GM is cutting jobs, closing plants in a healthy economy

DETROIT — Even though unemployment is low, the economy is growing and U.S. auto sales are near historic highs, General Motors is cutting thousands of jobs in a major restructuring aimed at generating cash to spend on innovation. It's the new reality for automakers that are faced with the present cost of designing gas-powered cars and trucks that appeal to buyers now while at the same time preparing for a future world of electric and autonomous vehicles. GM announced Monday that it will cut as many as 14,000 workers in North America and put five plants up for possible closure as it abandons many of its car models and restructures to focus more on autonomous and electric vehicles. The reductions could amount to as much as 8 percent of GM's global workforce of 180,000 employees. The cuts mark GM's first major downsizing since shedding thousands of jobs in the Great Recession. The company also said it will stop operating two additional factories outside North America by the end of next year. The move to make GM get leaner before the next downturn likely will be followed by Ford Motor Co., which also has struggled to keep one foot in the present and another in an ambiguous future of new mobility. Ford has been slower to react, but says it will lay off an unspecified number of white-collar workers as it exits much of the car market in favor of trucks and SUVs, some of them powered by batteries. Here's a rundown of the reasons behind the cuts: Coding, not combustion CEO Mary Barra said as cars and trucks become more complex, GM will need more computer coders but fewer engineers who work on internal combustion engines. "The vehicle has become much more software-oriented" with millions of lines of code, she said. "We still need many technical resources in the company." Shedding sedans The restructuring also reflects changing North American auto markets as manufacturers continue to shift away from cars toward SUVs and trucks. In October, almost 65 percent of new vehicles sold in the U.S. were trucks or SUVs. That figure was about 50 percent cars just five years ago. GM is shedding cars largely because it doesn't make money on them, Citi analyst Itay Michaeli wrote in a note to investors. "We estimate sedans operate at a significant loss, hence the need for classic restructuring," he wrote. The reduction includes about 8,000 white-collar employees, or 15 percent of GM's North American white-collar workforce. Some will take buyouts while others will be laid off.