Buick Skylark Gs 400 on 2040-cars

Auto blog

Junkyard Gem: 1978 Buick Skylark Sedan

Around the time that OPEC shut off the oil taps, The General realized that it was time to sell more small cars from GM divisions not previously known for such machines. The logical candidate for this project was the Chevrolet Nova, a rear-wheel-drive compact that shared much of its chassis design with the Chevrolet Camaro and Pontiac Firebird. The Nova-based Pontiac Ventura came out in the 1971 model year, and the Buick and Oldsmobile Divisions began producing their own badge-engineered Nova siblings for 1973 (Cadillac was late to the party, but eventually created the Nova-based Seville for 1976). At first, the Buickized Nova got Apollo badges, but the better-known Skylark name was applied to these cars for the 1975 through 1979 model years. Today's Junkyard Gem is one of those Nova-based Skylarks, found in a Denver self-serve yard. From the 1964 through 1972 model years, the Skylark lived on the A-Body chassis and was sibling to the Chevrolet Chevelle/Malibu, Pontiac LeMans/Tempest/GTO, and Oldsmobile Cutlass/442. After the 1975-1979 rear-wheel-drive X-Body phase, the Skylark name then went onto the unrelated front-wheel-dive X-Body chassis developed for the Chevrolet Citation. It's a Nova, sure, but Buick made sure that it had a bit more swank than its Chevy counterpart. Checked seat fabric with big square buttons! The base engine in the '78 Skylark was the 3.8-liter Buick V6, rated at 110 horsepower. GM had invested in a new crankshaft design for this engine the year before, so it no longer had the "odd-fire" cut-down V8 crankshaft that shook the fillings out of so many drivers' teeth in earlier years. An assortment of low-compression V8s from Oldsmobile, Chevrolet, Pontiac, and Buick were available as optional equipment as well, eventually leading to the "Chevymobile" lawsuits of a few years later. The base transmission in this car was a three-speed manual (I'm not sure if you could still get a three-on-the-tree column-shift manual Skylark in 1978, but a three-on-the-floor manual was available for sure). The very last three-on-the-tree car Americans could buy was the '79 Nova and its Olds Omega/Pontiac Phoenix siblings, while the final three-on-the-floor cars were the '81 Malibu and siblings. This car has the optional three-speed automatic.

GM applies to trademark Buick Envision GX

GM Authority found a GM application with the U.S. Patent and Trademark Office to reserve the name Buick Envision GX. We can't be certain, but it seems this all but confirms that the three-row Buick Envision, which debuted a year ago in China as the Envision Plus (pictured), will sell here as the Envision GX. Doing so would reinforce the naming convention established in the U.S. with the Encore and slightly larger Encore GX. Adding a third row to the compact two-row Envision extends three of of four dimensions. According to specs the Chinese transport ministry put online last year, the three-row Envision will be 190.7 inches long on a 111.5-inch wheelbase, increases of 8.2 and 2.1 inches, respectively. Height grows by 2.7 inches as well, only the 74.1-inch width holding steady.   That length has been utilized to make life easier for second- and third-row passengers. The Envision Plus in China comes with 2+3+2 seating, the second-row bench able to slide 9.8 inches. Behind that, cargo volume with the second and third rows stowed climbs from 52.7 cubic feet to 58 cubic feet. The sole engine will be the current Envision's 2.0-liter four-cylinder, making 228 horsepower and 258 pound-feet of torque, sent to the wheels through a nine-speed automatic. Power gets sent to the front wheels as standard, and all-wheel drive will be an option.  On top of the extended rear overhang on the seven-seater, GM designers slipped in a few cosmetic changes to set it apart from the five-seater. A new horizontal trim piece connects the headlights, the lower bumper getting a pair of larger, reshaped intakes. A complementary horizontal slash connects slimmer taillights, the license plate surround squared off instead of trapezoid-shaped.  Related video:

GM may kill 6 car models as it works with UAW to tackle sales slump

The president of the United Auto Workers union said on Thursday the union is talking with General Motors about the potential threat to plants and jobs from slumping U.S. car sales. GM's response will be more trucks and SUVs, and sources say at least six slow-selling car models may be killed off. "We are talking to (GM) right now about the products that they currently have" at underused car plants such as Hamtramck in Michigan and Lordstown in Ohio, and whether they might be replaced with newer, more popular vehicles such as crossovers, Dennis Williams told reporters. "We are tracking it (and) we are addressing it," Williams added. GM has cut shifts at several U.S. plants this year as inventories of unsold cars have ballooned. Industry analysts said more jobs could be at risk as the automaker wrestles with permanently shrinking production of small and midsized sedans. GM is reviewing whether to cancel at least six passenger cars in the U.S. market after 2020, including the Chevrolet Volt hybrid, which could be replaced in 2022 with a new gasoline-electric crossover model, Reuters has learned from people familiar with the plans. Other GM cars at risk include the Buick LaCrosse, Cadillac CT6, Cadillac XTS, Chevrolet Impala and Chevrolet Sonic, sources said. Some analysts have singled out GM's Hamtramck plant in Detroit as one of the most vulnerable because of plummeting car sales. The plant, which opened in 1985, builds four slow-selling models: Buick LaCrosse, Chevrolet Impala, Cadillac CT6 and Chevrolet Volt. In the first half, it built fewer than 35,000 cars, down 32 percent from the same period in 2016, according to suppliers familiar with GM's U.S. production schedule. The typical GM assembly plant builds 200,000-300,000 vehicles a year.COMING ATTRACTIONS: TRUCKS AND SUVS GM must "create some innovative new products" to replace slow-selling sedans "or start closing plants," said Sam Fiorani, vice president of AutoForecast Solutions. The auto maker already has begun to shift future production plans from cars to trucks, according to Morgan Stanley auto analyst John Murphy. He estimates that fewer than 10 percent of the new vehicle models that GM will introduce over the next four years will be passenger cars, with the rest divided among trucks, SUVs and crossovers. GM plans to add production of the new Cadillac XT4 crossover next year to its Malibu sedan plant in Fairfax, Kansas.