1995 Buick Skylark Custom 3.1 V6 Auto Rare Cheap Commuter Gas Saver Commuter on 2040-cars

Auto blog

2021 Buick Envision's bold design means small space gains, a few big losses

So far, every preview we've had of the 2021 Buick Envision compels us to believe that it isn't playing in the same league as the current Envision, nor is it playing the same sport. The chiseled, crisp exterior is matched by an interior that, in pictures at least, sends a genuine premium message. GM Authority got early intel on dimensions for the new crossover, the numbers showing that the only close relationship between the current and the new Envision is in size. According to GMA, the 2021 Buick will be 185.5 inches long on a wheelbase of 109.4 inches, it'll stand 74.1 inches wide without mirrors, and 64.6 inches tall. Front and rear tracks are matched at 63.3 inches. That makes the new version 1.8 inches longer than the current five-seater, with a wheelbase stretched 0.9 inches, while width is 1.7 inches wider but overall height is 2.2 inches lower. The track has been expanded by 1.3 inches front and back. The four-trim lineup will be base, Preferred, Essence and Avenir. Buick's website pegs the current Envision at the single curb weight of 3,755 pounds. GMA writes that the new car comes in at 3,685 pounds in base form, or 3,932 in top Avenir trim. Those could all represent weights for front-wheel-drive models. AWD will be optional on all but the base 2021 Envision. The price for edgier design is a tiny cut in interior room in front. In the coming crossover, front headroom shrinks 0.4 inches to 39.6 inches, front legroom shrinks by 0.5 inches, front shoulder room goes down by 0.3 inches. Front hip room gains 0.7 inches, however, Occupants in the row behind get a tiny bit more space in two dimensions, rear headroom going up 0.4 inches, rear legroom by 1.8 inches, Rear shoulder room gets shaved 0.7 inches, and those haunches on the 2021 model take a bite out of rear hip room, that spec dropping by 5.7 inches to 47.4.  Cargo room sees a slight dip, too, there being 25.2 cubic feet of space behind the second-row of seats compared to 26.9 feet available now. The gap grows with the rear seats down, the coming Envision able to swallow 52.7 cubic feet behind the front row, the current Envision managing 60 cubic feet.  When product starts showing up on dealer lots, we're to expect a 2.0-liter turbocharged four-cylinder under the hood with 230 horsepower and 258 pound-feet of torque, shifting through GM's nine-speed automatic transmission. GMA believes pricing will start around $34,000, which would be about $500 more than the current Envision.    

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.

Junkyard Gem: Heavily personalized 1997 Buick Skylark Custom Sedan

Normally I wouldn't be much interested in a third-generation GM N-Body (a family that includes the Chevy Malibu and Olds Achieva) spotted in the junkyard, though a case could be made for such a vehicle's historical significance. This '97 Skylark, however, arrived in a Northern California self-service wrecking yard well-plastered with stickers, reflectors, and other personalizing touches, making it an interesting document of its time and place. It appears that both of the original white fenders got mashed and then replaced with blue ones, almost certainly obtained cheaply at a yard like this one. If you're not going to paint your new fenders to match the car, then you're already well down the slippery slope to making the car a giant mobile canvas to display your interests. A 20-year-old GM N-Body, regardless of how nice it was when new, isn't worth much, and you could stretch a line of these cars from Lansing to Lahore with all the used-up Ns sitting in American wrecking-yard inventory right now. Perhaps it was the grandchild of the car's original owner who indulged in White Widow cannabis and listened to Siouxsie & the Banshees. The odds against finding the original window sticker in a car like this are mighty long, but here it is. Sold new at Putnam Buick in Burlingame. It appears that this car spent most of its final decade in or near Mill Valley. Mill Valley is a mere 30 miles from Burlingame, or about three hours of Buick driving (you have to go past SFO, through San Francisco, and across the Golden Gate Bridge, a journey featuring apocalyptically terrible traffic at just about any time). Drive east across the Richmond-San Rafael Bridge and you'll get to this Skylark's final parking space, about 20 miles from Mill Valley. This car lived its whole life near the shores of San Francisco Bay, and it will die there. Feathers and a political-party charm adorn the headliner. This car's final owner had a practical side, as we can see from the many reflectors and lengths of safety tape. Just the thing for avoiding a T-bone wreck in the dead of night! "Essentially, Skylark embodies all of the features customers expect from a Buick, in a smaller package, with a very attractive MSRP."