1996 Buick Roadmaster Collector's Edition Sedan 4-door 5.7l Lt1 Posi Rear on 2040-cars

Auto blog

China-market Buick Envista rumored possible replacement for the Encore

Buick currently sells four crossovers, the Encore, Encore GX, Envision, and Enclave. That number will soon be whittled to three, the Encore expected to end production after this model year. If speculation provided by GM Authority is correct, there could be changes afoot in the middle of the line in time for the 2024 model year. Buick has said it will maintain four ICE-powered crossovers, so the brand will need something to fill the coming gap. GMA sources suggest the China-market Buick Envista could get the nod. Buick launched the coupe-esque model across the Pacific in August, a relation to the Chevrolet Seeker that appeared on the Chinese market in April. The Envista debuted the brand's latest design language inspired by pure-electric concepts like the Electra-X and WIldcat. Thin, angled headlights frame a wide, low grille, leading back to a roof that slopes into a high back and double spoilers. GM applied to trademark the Envista name in the U.S. in early 2019, then maintained it with extension requests until earlier this year. Then, in September 2022, the automaker abandoned the application, which could bode ill for whatever chance there was, if any. Another snag could be that the Envista is 182.5 inches long, 71.5 inches wide, and 61.6 inches high on a 106.3-inch wheelbase. Various reports have pitched the Envista to fill the (small) space between the Encore GX and the Envision; however, the Envista falls just 0.10 short of the Envision's length, and it's three inches smaller in every other dimension. On the other hand, the Envista is 11.1 inches longer and 0.1 inch wider than the Encore GX, with a wheelbase 4.1 inches longer. That makes a lot of overlap in the dimensional Venn diagram. Were the Envista to come as-is, it wouldn't so much be a replacement for the Encore as be a different kind of compact SUV from the Envision on a more modern platform. Further speculation from "sources familiar with the matter" says a U.S.-market Envista could get the Avenir treatment. Avenir marks the ultimate in Buick luxury, an appellation currently restricted to the Envision and Enclave. According to a separate report, the Encore GX is also headed into the Avenir club with the compact crossover gets refreshed for the 2024 model year. An Encore GX Avenir would adopt some exterior tweaks like 18-inch alloys, and turn a load of optional equipment available for the Encore GX Essence trim into standard equipment. Related video:

Buick Regal lives on in China, gets visual and tech updates

Axed from the American market after the 2020 model year, the Buick Regal lives on in China. It's selling well enough across the Pacific for the General Motors-owned brand to justify investing in a round of updates that includes a new-look exterior design and more interior tech. Chinese buyers only have access to the sedan variant of the Regal; the TourX wagon briefly sold on our shores isn't available. The facelift includes sharper-looking headlights, a big grille that occupies most of the space on a redesigned front bumper, and Buick's new logo. Not much has changed when you look at the Regal from the side, it still features an upswept line that runs across the bottom of both doors, and Buick chose not to publish photos of the rear end which strongly suggests little has been updated. New wheel designs are available as well. Most of the changes made to the interior fall in the technology basket. Buick notably added its QuietTuning noise-cancelling function, which promises to make the cabin quieter, while shift-by-wire technology frees up space for two big cupholders on the center console. Connectivity is part of the package, too: Buick's eConnect infotainment system includes an artificial intelligence-powered Baidu voice assistant. Power for China's Regal comes from a turbocharged, 1.5-liter four-cylinder engine whose output hasn't been released. Alternatively, the list of options includes a 2.0-liter turbo-four rated at 233 horsepower and 258 pound-feet of torque. It spins the front wheels via a nine-speed automatic transmission. In contrast, the Regal sold here was available with anywhere from 250 to 310 horsepower depending on the trim. Pricing for the 2023 Buick Regal starts at 159,800 Chinese yuan, which represents around $22,400. China is the Regal's last bastion. Buick left the sedan segment in the United States after it swept the Regal out of its range in 2020, and no evidence credibly suggests that a successor for our market is in the pipeline. Opel — which General Motors sold to Peugeot in 2017 — developed the Regal and sold its own version of it called Insignia across Europe until 2022. Here again, the model won't be directly replaced. Continuing our global tour, Australia-based Holden tried to market a variant of the Insignia as a replacement for the rear-wheel-drive, V8-powered Commodore from 2018 to 2020. The model flopped and retired after a lackluster career, and Holden closed shortly after. Related video:

GM applies to trademark Buick Envision GX

GM Authority found a GM application with the U.S. Patent and Trademark Office to reserve the name Buick Envision GX. We can't be certain, but it seems this all but confirms that the three-row Buick Envision, which debuted a year ago in China as the Envision Plus (pictured), will sell here as the Envision GX. Doing so would reinforce the naming convention established in the U.S. with the Encore and slightly larger Encore GX. Adding a third row to the compact two-row Envision extends three of of four dimensions. According to specs the Chinese transport ministry put online last year, the three-row Envision will be 190.7 inches long on a 111.5-inch wheelbase, increases of 8.2 and 2.1 inches, respectively. Height grows by 2.7 inches as well, only the 74.1-inch width holding steady.   That length has been utilized to make life easier for second- and third-row passengers. The Envision Plus in China comes with 2+3+2 seating, the second-row bench able to slide 9.8 inches. Behind that, cargo volume with the second and third rows stowed climbs from 52.7 cubic feet to 58 cubic feet. The sole engine will be the current Envision's 2.0-liter four-cylinder, making 228 horsepower and 258 pound-feet of torque, sent to the wheels through a nine-speed automatic. Power gets sent to the front wheels as standard, and all-wheel drive will be an option.  On top of the extended rear overhang on the seven-seater, GM designers slipped in a few cosmetic changes to set it apart from the five-seater. A new horizontal trim piece connects the headlights, the lower bumper getting a pair of larger, reshaped intakes. A complementary horizontal slash connects slimmer taillights, the license plate surround squared off instead of trapezoid-shaped.  Related video: