1968 Buick Riviera 430 Turbo 400 Project Car on 2040-cars

Auto blog

Junkyard Gem: 1985 Buick Skyhawk Custom Coupe

General Motors began building cars on the compact J Platform in 1981, and J-based machinery stayed in production all the way through the 2005 Chevrolet Cavalier and Pontiac Sunfire. The best-known of the J-cars in North America was always the Cavalier, but The General's Pontiac, Oldsmobile, Buick and even Cadillac divisions each sold their own Js here. The Buick version was the Skyhawk, built for the 1982 through 1989 model years. Here's a sporty '85 Skyhawk coupe, found in a Northern California boneyard recently. The Custom trim level was the cheapest version of the Skyhawk in 1985, and the two door was the most affordable configuration (midgrade Skyhawks were Limiteds and the T-Type was at the top of the Skyhawk pyramid that year). The MSRP on this car started at $7,512 (about $21,220 in inflation-adjusted 2022 dollars), making it the least expensive new Buick offered for sale in the United States in 1985. The Skyhawk name had been used on the Buick version of the Chevrolet Monza during the 1970s. The Chevrolet-badged sibling of this car was much cheaper, with the list price of the base '85 Cavalier coupe set at $6,872 (around $19,410 today). There were cheaper new Chevrolets that year, of course; a new Chevette cost just $5,470, while the Isuzu-built Spectrum was $6,295 and the Suzuki-built Sprint a skinflinty $5,151. The base engine in the Custom and Limited was this 2.0-liter SOHC straight-four rated at 86 horsepower. A turbocharged 1.8-liter version with 150 horses was available for an extra 800 bucks ($2,260 now). A four-on-the-floor manual transmission was standard equipment in the 1985 Skyhawk, but the buyers of most of these cars insisted on automatics. The price for this one was $425 ($1,200 today). A five-speed manual cost just $75 ($210). Velour-ish upholstery in Bordello Red (Buick didn't use that name) was all the rage during the 1980s and well into the 1990s. This car's interior looks pretty nice, considering where it's parked. Community Buick GMC in Iowa is still in business today. The five-digit odometer means we can't know how many miles were on this car at the end. I brought a Chicago-made 1950s Pho-Tak Foldex 30 film camera with me to the junkyard that day, as one does, and I photographed the Skyhawk on Kodak Portra 160 film. The irritatingly perky Skyhawk owners in this TV commercial appear to be about one-third the age of typical mid-1980s Buick shoppers.

Buick working on Encore refresh

It's been three years now since the model we know as the Buick Encore (sold overseas as the Vauxhall/Opel Mokka) first hit the scene. That makes it about due for a bit of a facelift, and judging from these latest spy shots, that's precisely what General Motors seems to be up to. The nose of this prototype (intriguingly wearing Buick badges but German plates) is all covered up, so it's hard to tell what Buick and its European counterparts have in store for the front-end restyling, but the fact that they've covered it so extensively tells us that somethings afoot. The tail should also get new lights and bumper as well. You can fully expect GM to take the opportunity to refresh the cabin while it's at it with tweaked ergonomics and new equipment. Meanwhile our sources tell us the 1.0-liter inline-three from the new Corsa could find its way under the Opel/Vauxhall's hood to join the current lineup of four-pots, but it's too early to say whether that engine might find its way across the pond to the Buick version as well.

Little-bit-bigger 2020 Buick Encore GX gets two three-cylinder engines

Ford broke the ice on selling three-cylinder engines in the U.S. with the 2014 Fiesta, then followed up with the EcoSport. Buick is about to widen that supermini-sized crack in the ice with the 2020 Encore GX. The semi-subcompact crossover will come in three trim levels that mix-and-match two turbocharged three-cylinder engines, two transmissions, and two drivetrains. The smaller engine is a 1.2-liter three-pot with 137 horsepower and 166 pound-feet of torque. This comes in one horse and 18 lb-ft of twist beyond the 1.4-liter four-cylinder in the smaller Encore. This engine will only be paired with a CVT and front-wheel drive in the Preferred, Select, and Essence trims. The meatier motor is a 1.3-liter three-cylinder with 155 hp and 174 lb-ft. That's down on the 163 hp and 177 lb-ft that the same engine produces in the Chinese-market version of the Encore GX. However, it gets buyers close to the 1.4-liter turbocharged four-cylinder that used to be optional on the smaller Encore, producing 153 hp and 177 lb-ft. This engine can be optioned on the front-wheel drive Select and Essence trims, where it would be mated to the CVT. The 1.3-liter three-cylinder is standard on all trims optioned with all-wheel drive, where it gets paired with GM's nine-speed automatic. GM does say the horsepower figures are estimates at the moment, so don't be surprised at any slight changes before deliveries begin next year. The Encore GX will serve buyers who would love it if the Encore had a bit more room but don't want to step up to the Envision. For a price GM hasn't announced yet, the Encore GX will reward those buyers with five more feet of cargo space, and some extra power for all those who decide to level up further. The junior Encore weighs just over 3,200 pounds, it's likely the Encore GX will shade that some. The Encore GX does ride on GM's new VSS-F platform, though, so the advanced architecture could provide an overall superior experience even with the lesser three-cylinder. GM has also said that the Encore GX will come standard with safety kit like forward collision alert and lane keep assist with a lane departure warning, features that are cost extras on the Encore. The Encore GX will also include automatic emergency braking, which can't be had on the Encore at any price.