2013 Buick Regal Gs on 2040-cars

Auto blog

2024 Buick Encore GX Cupholder Mega Test: Will the Nalgene bottle fit?

I recently reviewed the 2024 Buick Encore GX in its new Avenir trim, appreciating the updates from its mid-cycle refresh and assessing its comfortable driving style. What I didn't dive into, however, were the cupholders. Specifically, I wanted to know if it could accommodate in a convenient location what is my favorite hydration facilitator, a 32-ounce Nalgene water bottle. This, like other oversized water bottles, often can't find a cupholder that will fit it. Its a particularly American problem (we're more obsessed with cupholders than other markets), so can this American budget-luxury crossover satisfy my own obsession with this big, dumb bottle? Let's find out. Ideally, we could put it in the front cupholders. Few vehicles' cupholders are big enough, though, with the Chrysler Pacifica, Lexus GX and Toyota 4Runner being notable exceptions. We can't add the Encore to that list, unfortunately. The cupholders are far too small. Usually, the second best option, if possible, is to put it in the front door pocket. Voila! It fits. No Nalgene rolling around on the front passenger seat in this Buick. But what about in back? The center armrest in the Encore GX is a fine place to rest one's elbow, but what about a big-ass bottle of water? Alas, the rear cupholders are equally dinky as the ones up front, which is often the case. The last-gen Toyota Tundra was an exception, where the rear cupholders were bigger than those up front which is super weird to me. I'mm looking forward to see what's what with the new Tundra. The rear door pockets are much smaller than those up front. This does not look promising. It's just big enough that I can wedge the bottom of the bottle inside, but not big enough to keep it there when the car is in motion. Sorry backseaters, you'd better settle for your lesser bottles, suckers. I had almost overlooked this little cubby in between the front cupholders and center console armrest. It's an odd shape, but with some luck, the Nalgene will fit. That's the ticket! This is even better than putting it in the door. It's not the most secure fit, but it's not so huge a space that the bottle knocks around and falls over with every input to the steering wheel or pedals. This ended up being where I put the Nalgene every time I drove the Encore GX, and, subsequently, I remained content and adequately hydrated. And the cupholders remained open for alternative beverages. Interested in more than just the cupholders?

Junkyard Gem: 1986 Buick Riviera

The Buick Riviera personal luxury coupe attained monstrous proportions by the middle 1970s, scaling in at well over 4,500 pounds by 1976. After spending 1977 and 1978 as sibling to the Chevy Caprice, the Riviera then moved to the front-wheel-drive platform used by the Cadillac Eldorado and Oldsmobile Toronado, staying there through the 1985 model year. The Riviera world became a lot more interesting for the 1986 model year, when a smaller and more sophisticated generation hit showrooms with curvier lines and electronic gadgetry straight out of science fiction. Today's Junkyard Gem is one of those cars, found in a self-service boneyard in Phoenix, Arizona. What makes this car such a fascinating bit of automotive history is this dash-mounted touchscreen interface, known as the Graphic Control Center. The 1986 Riviera was the first GM vehicle to get the GCC, which means it was the first production car in history with a factory-installed touchscreen display. This system became available in the Buick Reatta and the Oldsmobile Toronado a few years later.  The GCC used a cathode-ray tube screen sourced from an ATM manufacturer, which ran on 120VAC power and required an inverter and dangerous high-voltage wiring inside the dash. It was used to operate the HVAC, the radio and the trip computer, as well as to display operating and diagnostic information. The system used numerous bulky components in addition to the dash screen; I've extracted a couple of complete sets of GCC components over the years and plan to build them into a junkyard-parts boombox. As it turned out, the senior-citizen-heavy demographic of Buick shoppers didn't feel great enthusiasm for the GCC and there wasn't a huge sales payoff for this revolutionary technology. That didn't stop GM from introducing the first mass-produced cars with head-up displays a couple of years later. The running gear wasn't quite as sophisticated as the GCC. The 1986-1993 Rivieras got old-fashioned 3.8-liter Buick V6s under their hoods; the one in this car was rated at 140 horsepower and 200 pound-feet. If you wanted a manual transmission in your '86 Rivvie, you were out of luck. A four-speed automatic was mandatory equipment. Note the unusual face-loading cassette deck in front of the shifter; the AM/FM radio was a remote-controlled unit living inside the center console. The MSRP for this car was $19,831, or about $55,691 in 2023 dollars.

2018 Buick Enclave slims down for spy shots

Most vehicles are refreshed every five years or so. New technology and styling is required to keep up with the latest trends. Although this cycle is common, there are some vehicles, like the Buick Enclave, that seem to stick around far past their expiration date. We now have spy shots of what appears to be the nine-year old Enclave's replacement. Although the vehicle in the photos is completely covered in camouflage, we can make out the new Buick family grill. There are a set of LED running lights up front and what appear to be a location for foglights toward the bottom. The camo covering is cut in places to allow gaps for sensors, presumably for parking and other driver aids. Out back, the rectangular taillights don't appear to be production ready. The whole rear, especially the glass, looks smaller than the outgoing model, though it is difficult to properly tell through the camouflage. The rear bumper has wide cuts for the dual exhaust pipes, and again the camo has cutouts for sensors. The side profile reveals the biggest change with the new Enclave. The current version shares a platform with the Chevrolet Traverse and the original GMC Acadia, some of the largest vehicles on the market. The all-new 2017 Acadia scaled down in order to compete against midsize crossovers and now has more in common with the smaller, Chinese-built Buick Envision. That doesn't mean the Enclave and Acadia are entirely separate. Both the Enclave and upcoming Traverse will ride on a stretched version of the Acadia platform. The general profile remains the same, but it's apparent that the vehicle in these photos is longer than the new GMC. Most other details are speculation. The Enclave will most likely arrive with GM's 3.6 liter V6. With the introduction of the Envision, the Enclave is expected to move upmarket to compete against the Acura MDX and Volvo XC90. Because of the slightly narrower shape, passenger seating is expected to fall to seven. The new crossover will probably lose a bit of weight with the redesign. The new Buick is expected to debut next year as a 2018 model. Look for the reveal of the Chevrolet Traverse replacement as well. Related Video: Featured Gallery Buick Enclave Spy Shots View 20 Photos Spy Photos Buick Crossover