2012 Buick Regal Base - Tip Top Shape Georgous on 2040-cars

Auto blog

Junkyard Gem: 1962 Buick Electra 225 4-Door Sedan

Buick built its first Electras as 1959 models, with Electra production continuing unabated through 1990 (after which the Park Avenue trim level took over as the model name, much as the Malibu trim level designation had shoved aside the Chevelle model name in 1978). Some of the handsomest Electras were the second-generation models, built for the 1961-1964 model years, and today's Junkyard Gem is one of those cars. I'd always assumed that the Buick Electra took its name from the daughter of Clytemnestra and Agamemnon in Greek mythology, because the people who named cars back then were forced to read Euripides and Sophocles as undergrads. In fact, the car was named after Electra Waggoner Bowman Biggs, a Texas heiress and sculptor who married the brother-in-law of Harlow Curtice, who ran the Buick Division before being promoted to president of General Motors in 1953. How did she feel when the last Electra rolled off the assembly line in 1990? The junkyard is full of history, if you know where to look. The 1959-1960 Electra had enormous tailfins, angled something like the ones seen on the same-year Chevrolet Impalas. This Electra generation ditched the fins but kept much of the general Space Age spirit of its predecessor. The Electra lived on the same platform as the Cadillac DeVille and Oldsmobile 98 from start to finish, and it was the most expensive Buick available in 1962. The MSRP of this one was $4,051, or about $41,462 in 2023 dollars. The engine in this one was present when it arrived at U-Pull-&-Pay, but a junkyard shopper grabbed it within a couple of days of arrival. It would have been a 401-cubic-inch (6.5-liter) "Nailhead" V8, rated at 325 horsepower and a whopping 445 pound-feet of torque (keep in mind that these are gross, not net, power numbers). The Nailhead's small valves meant that it wasn't much good for high-rpm use, but its big torque was perfect for moving two-ton land yachts. The final Nailheads were installed in 1966 Buicks. Every production Electra ever built came with an automatic transmission, and the 1959-1963 models received the extremely smooth and alarmingly inefficient Dynaflow (known as the Dual-Path Turbine Drive for 1962). Originally developed for use in the 1943 M18 Hellcat tank destroyer, the Dynaflow was considered a two-speed automatic but drove more like a CVT with two selectable drive ranges.

How tariffs in China could cause a meltdown in the American South

While BMW is clearly a German company, the crossovers that are exceedingly important to it are actually made in Spartanburg, South Carolina. And more than that, the Spartanburg plant (physically located in the town of Greer) is where the corporate know-how and capability for those vehicles is concentrated. These are the vehicles – specifically, the BMW X3, X4, X5, X6, X7 – that drove record growth for the company in 2018, according to BMW. But whatÂ’s most notable about BMW Group Plant Spartanburg, given current events, is that according to the U.S. Department of Commerce it was the largest automotive exporter by value for the fifth year running in 2018. ThatÂ’s worth emphasizing: largest automotive exporter by value. Not GM. Not Ford. BMW. And where might one assume that more than a few of those X vehicles are shipped to? China. Some 360 miles southwest of Spartanburg is Mercedes-Benz U.S. International, Inc., in in Tuscaloosa County, Alabama. It started building vehicles in 1997. Since then, Daimler AG has invested in excess of $5.5 billion in the facility. It manufactures the crossover now known as the GLE, formerly the ML-Class. It also makes the GLE coupe and GLS. Daimler describes the Tuscaloosa facility as “the traditional home of SUV production” for those vehicles. When it reported its global 2018 sales, Daimler noted that on a global basis SUVs account “for more than a third of all Mercedes-Benz sales.” According to the Chinese finance ministry, on December 15th the Chinese government will impose a 25% tariff on automobiles (and a 5% tariff on auto parts) from the U.S. Certainly this is going to have a direct effect on the sales of vehicles that are manufactured in the U.S. and exported to China. BMW and Mercedes are going to take it on the chin for the vehicles that they make in plants that they invested in so heavily in the U.S. Which could potentially mean that people in places like Greer, South Carolina, and Vance, Alabama, are going to find themselves in the crosshairs of the combatants. Soo too could Lincoln, which produces vehicles in places like Louisville, Kentucky (Navigator), Chicago, Illinois (Aviator) and Flat Rock, Michigan (Continental). Although the Tesla Gigafactory 3 is rapidly nearing completion in Shanghai, it is worth noting that vehicles built in Fremont, California, are being sold in China in numbers that donÂ’t make Musk unhappy.

Refreshed 2019 Buick Envision gets sharper edges, optional nine-speed transmission

After 18 months on the market in the United States, the Buick Envision took its place as the third-best-selling vehicle among Buick's eight models, slotting in behind the Encore and Enclave. January sales this year jumped 13.7-percent year-over-year, just a few hundred behind the Enclave. Now, the Chinese-made compact SUV gets a modest makeover, but buyers of the 2019 Buick Envision will need to reach up into the upper trims to access the best of what's new. The big mechanical upgrade comes with the option of GM's Hydra-Matic 9T50 nine-speed automatic instead of standard the six-speed. However, that appears to be limited to just two of the five available Envision trims: Premium I and Premium II. The base, Preferred, and Essence models stick with the six-speed only. Design changes center around the front and rear fascias. The grille motif switches to a be-winged Buick emblem - in tri-color spec, not monochrome - over the previous waterfall, matching that of the sibling crossovers. The lower front fascia gets redrawn, with the fog lights at the edges now sitting in square recesses with reworked chrome trim and sharper edges on the bumper. Premium trims move up from HID projectors to bi-LED headlights, while the other three trims shed their composite halogens for HID lights. According to the 2019 order guide, Ebony seats with Dark Plum interior accents leave the menu, replaced by Dark Galvanized leather seats with Ebony trim. White interior lighting will illuminate the instrument panel and door trim, replacing Ice Blue, and comfort/convenience tweaks come in the form of wireless phone charging, an cabin air ionizer and a button to shut off the stop-start system. The latter would be a noteworthy upgrade as it's been a common complaint logged against so-equipped GM vehicles. In back, design elements get sharper edges, and the taillights switch to slimmer LED units. Designers have hidden the single exhaust outlet on the lower three trims with the base, 197-horsepower 2.5-liter engine. It appears that choosing the optional, 252-hp 2.0-liter engine will be identified by dual rectangular exhaust finishers instead of the round tips of previous years. Exterior colors hold steady at six, but Midnight Amethyst Metallic gives way to Satin Steel Gray Metallic, and the current 19-inch wheels get replaced with two new designs. The 2019 Buick Envision has already gone on sale in China, and should reach U.S. dealers in April. Related Video: