2008 Buick Lucerne Cxl on 2040-cars

Auto blog

Last-ever Buick Grand National heads to Barrett-Jackson auction

This 1987 Buick Grand National brought the curtains down on a heap of General Motors history. When this black beauty rolled down the line at 5 p.m. on December 11, 1987, it represented the end of manufacturing at GM's Pontiac Assembly Plant after 60 years building cars. This was the last car to sit on GM's G-Body platform, having supported legendary names like Monte Carlo, Cutlass Supreme, and Regal. And this was the last-ever Buick Grand National, a big coupe that in just five years on the market had helped make the Buick Regal lineup an object of sincere lust among enthusiasts. Powered by a 3.8-liter turbocharged and intercooled 3.8-liter V6, the engine made 245 horsepower and 355 pound-feet of torque. The only car above it in the lineup was the exceptionally rare GNX, which made 276 hp and 360 lb-ft. The Buick Grand National is headed to the Barrett-Jackson auction block in Scottsdale next month.    Louisiana resident Bob Colvin bought this car from the factory. The Drive spoke to Colvin, who explained that then-GM President Roger Smith told him he could have the penultimate Grand National, but Buick planned to put the last car on display. When Colvin arrived at the plant, though, Colvin said the plant manager told him, "I'm running this plant and you've gone through the effort to be here. It will be a real celebration," and got him the last car made. As proof, a GM film crew followed the car down the line, plant workers and two GM execs signed various parts of the engine, including current GM President Mark Reuss. The car comes with all of the autographs and signage the autoworkers created to go with the car, as well as the original window sticker. Colvin and his wife built an addition onto their house to display the car. Save for a trip to the Buick Centennial Celebration in 2003, the Buick has lived in its special place all its life and has just 33 miles on the odometer. Behind the new-car plastic that shrouds the interior, the only flaw appears to be a tiny crack in the steering wheel center cap where a bolt might have been overtorqued. The car is being offered with no reserve, the pre-sale estimate landing right around the $500,000 mark. That would about double recent auction sales for low-mileage GNX's this year, but there's every reason to believe this car's one-of-one place in history could get auction paddles waving. 

Little-bit-bigger 2020 Buick Encore GX gets two three-cylinder engines

Ford broke the ice on selling three-cylinder engines in the U.S. with the 2014 Fiesta, then followed up with the EcoSport. Buick is about to widen that supermini-sized crack in the ice with the 2020 Encore GX. The semi-subcompact crossover will come in three trim levels that mix-and-match two turbocharged three-cylinder engines, two transmissions, and two drivetrains. The smaller engine is a 1.2-liter three-pot with 137 horsepower and 166 pound-feet of torque. This comes in one horse and 18 lb-ft of twist beyond the 1.4-liter four-cylinder in the smaller Encore. This engine will only be paired with a CVT and front-wheel drive in the Preferred, Select, and Essence trims. The meatier motor is a 1.3-liter three-cylinder with 155 hp and 174 lb-ft. That's down on the 163 hp and 177 lb-ft that the same engine produces in the Chinese-market version of the Encore GX. However, it gets buyers close to the 1.4-liter turbocharged four-cylinder that used to be optional on the smaller Encore, producing 153 hp and 177 lb-ft. This engine can be optioned on the front-wheel drive Select and Essence trims, where it would be mated to the CVT. The 1.3-liter three-cylinder is standard on all trims optioned with all-wheel drive, where it gets paired with GM's nine-speed automatic. GM does say the horsepower figures are estimates at the moment, so don't be surprised at any slight changes before deliveries begin next year. The Encore GX will serve buyers who would love it if the Encore had a bit more room but don't want to step up to the Envision. For a price GM hasn't announced yet, the Encore GX will reward those buyers with five more feet of cargo space, and some extra power for all those who decide to level up further. The junior Encore weighs just over 3,200 pounds, it's likely the Encore GX will shade that some. The Encore GX does ride on GM's new VSS-F platform, though, so the advanced architecture could provide an overall superior experience even with the lesser three-cylinder. GM has also said that the Encore GX will come standard with safety kit like forward collision alert and lane keep assist with a lane departure warning, features that are cost extras on the Encore. The Encore GX will also include automatic emergency braking, which can't be had on the Encore at any price.

Buick version of Equinox/Terrain CUV spied testing... with autonomous gear?

Let's get the most pressing bits of this story out of the way right off the bat: What we see here appears to be a new compact crossover from Buick. According to the spy photographer, this machine may be a little bit smaller on the outside than the current Chevrolet Equinox and GMC Terrain 'utes, which makes sense since recent rumors suggest GM's small crossovers will migrate to a new platform that will mark a convergence between the automaker's Delta (Chevy Cruze, Buick Verano) and Theta (Equinox, Terrain) platforms. This Buick would likely use this new D2UX platform.
We've been expecting Buick to unleash a crossover to slot between the very small Encore and the very large Enclave, and various rumors have indicated that the model may be known as either the Anthem or Envision. It's worth mentioning that Buick had planned, back in 2009, to release a vehicle in the compact CUV market, but abandoned those plans after a particularly poor reception.
And now for something completely different... Take another look at the spy shots above, and pay special attention to the cylindrical device mounted to the vehicle's roof. We can't say for sure what it is, but our spy photographer opines that it looks quite a bit like the 360-degree Lidar camera equipment used by Google for its autonomous cars. Is General Motors working with Google on autonomous car technology? We don't know, but you can definitely consider us intrigued.