1978 Buick Lesabre Custom on 2040-cars

Auto blog

Small number of 2013 Buick Encore models recalled for loose steering wheel

General Motors has issued a recall and a stop sale for the 2013 Buick Encore due to an issue that could result in the steering wheel falling off on certain models. In a letter to the National Highway Traffic Safety Administration, GM says that 144 Encores equipped with heated steering wheels could have been incorrectly retrofitted due to a parts shortage.
Needless to say, a loose or separated steering wheel would likely cause an accident if it happened while the vehicle was in motion. The recall doesn't go into effect until April 12, but concerned Encore owners can use the official recall notice (attached below) to contact GM.

2017 Buick LaCrosse an evolution of sharp Avenir concept

After years as a bloated, uninspiring, but comfortable near-premium sedan, Buick has taken the wraps off a leaner, lither, far more stylish LaCrosse. The third-generation model has just made its debut at the 2015 Los Angeles Motor Show. While there's a lot to talk about, let's first address the new, Avenir-inspired sheetmetal. The fascia is basically the concept car smoothed over into production form, featuring the same winged trishield. In place of the chrome-trimmed waterfall, the LaCrosse gets a blacked-out, recessed grille with a chrome surround. It looks good in photos but it's better in person, adding a real sense of complexity and depth to the front end. The headlights and lower fascia, meanwhile, adhere closely to the concept. The same cannot be said of the LaCrosse's tail. While the taillight lighting pattern is similar, the overall shape of the lighting element is radically different, refining the design featured on the back of the Regal. Also gone, sadly, is the Avenir's boattail rear deck. Instead, the LaCrosse gets a small rear deck that curves up into a pleasant duckbill spoiler. The rest of the tail is pleasantly restrained. Perhaps the weakest point is the profile, where Buick has instituted a "split-spear" design, featuring a strong shoulder line above the rear wheel well, which sits below an even stronger character line that curves down and towards the front of the car. It strikes us as just a little too much, like the Impala. Underneath that sheetmetal, Buick has managed to trim nearly 300 pounds of body fat, nearly half of which came from the vehicle's actual structure. That 300 lbs, according to Buick's engineers, is equivalent to a Kenmore side-by-side refrigerator, in case you needed a helpful comparison. Despite the weight savings, Buick has upped the torsional rigidity for this new model by 15 percent. The LaCrosse's cabin features a strong, cockpit-like design, with a high, floating-bridge center console. This is possible due to Buick's adaption of the Electronic Precision Shift system, introduced earlier this month on the new Cadillac XT5. Despite the new-fangled console design, Buick's retained the wraparound cabin style introduced on the second-gen model. Based on a quick crawl around the interior, space is great in front, although ingress in back is somewhat difficult due to the roofline. You're probably wondering why we haven't said anything about the mechanicals just yet.

China-market Buick Envista rumored possible replacement for the Encore

Buick currently sells four crossovers, the Encore, Encore GX, Envision, and Enclave. That number will soon be whittled to three, the Encore expected to end production after this model year. If speculation provided by GM Authority is correct, there could be changes afoot in the middle of the line in time for the 2024 model year. Buick has said it will maintain four ICE-powered crossovers, so the brand will need something to fill the coming gap. GMA sources suggest the China-market Buick Envista could get the nod. Buick launched the coupe-esque model across the Pacific in August, a relation to the Chevrolet Seeker that appeared on the Chinese market in April. The Envista debuted the brand's latest design language inspired by pure-electric concepts like the Electra-X and WIldcat. Thin, angled headlights frame a wide, low grille, leading back to a roof that slopes into a high back and double spoilers. GM applied to trademark the Envista name in the U.S. in early 2019, then maintained it with extension requests until earlier this year. Then, in September 2022, the automaker abandoned the application, which could bode ill for whatever chance there was, if any. Another snag could be that the Envista is 182.5 inches long, 71.5 inches wide, and 61.6 inches high on a 106.3-inch wheelbase. Various reports have pitched the Envista to fill the (small) space between the Encore GX and the Envision; however, the Envista falls just 0.10 short of the Envision's length, and it's three inches smaller in every other dimension. On the other hand, the Envista is 11.1 inches longer and 0.1 inch wider than the Encore GX, with a wheelbase 4.1 inches longer. That makes a lot of overlap in the dimensional Venn diagram. Were the Envista to come as-is, it wouldn't so much be a replacement for the Encore as be a different kind of compact SUV from the Envision on a more modern platform. Further speculation from "sources familiar with the matter" says a U.S.-market Envista could get the Avenir treatment. Avenir marks the ultimate in Buick luxury, an appellation currently restricted to the Envision and Enclave. According to a separate report, the Encore GX is also headed into the Avenir club with the compact crossover gets refreshed for the 2024 model year. An Encore GX Avenir would adopt some exterior tweaks like 18-inch alloys, and turn a load of optional equipment available for the Encore GX Essence trim into standard equipment. Related video: