2014 Buick Lacrosse Leather on 2040-cars

Auto blog

Buick Enspire spied for the first time, loses concept's electric powertrain

About a year ago, Buick showed a high-performance electric crossover with wide, aggressive, curvy lines that was called the Buick Enspire. Now we have our first look at the production version. While it does seem to be styled like the crossover, it also seems to have lost its electric powertrain in favor of internal combustion. At the front of the crossover, we can clearly see it has the skinny, scowling headlights of the concept sitting high on the front fascia and flush with the hood. The main grille looks like it may be smaller, but it could also just be that the actual open section of the grille doesn't fill up the grille area of the fascia. In profile, the crossover has an attractive long nose, low roof and rising belt line. The rear shows the most change, as the rear pillars are much thicker, and the taillights don't appear to span the full width of the crossover. It's in the rear that we can also see the evidence that the Buick Enspire will actually be gasoline powered. Looking very closely under the rear bumper cover, we can see two exhaust tips turned to face the ground. Based on the size of the crossover, and the fact a Cadillac XT4 was being driven along with the prototype, the Enspire is probably using the XT4's platform, as well as its mechanical bits. That means it probably has a turbocharged 2.0-liter four-cylinder making 237 horsepower and 258 pound-feet of torque. Power will also probably go through a nine-speed automatic to either the front wheels or all four. This prototype looks to be pretty far along, so we'll probably see the production version in about a year. Considering the Enspire's size and likely powertrain, it may even replace the similar Buick Envision. And since the Envision is Buick's worst selling crossover (unless you count the Regal TourX as one), it would be ripe for replacement.

The Chinese experiment | 2017 Buick Envision First Drive

The 2017 Buick Envision is a very good five-passenger crossover. The "but" you should anticipate will come in good time. First it's worth understanding why it exists at all. Out of the ashes of GM's bankruptcy a few flowers blossomed and the carmaker is doing exceptionally well, certainly far better than Chrysler has done in the wake of its free fall into Chapter 11. But of all the surprises at GM's turnaround, Buick surely ranks highest, without question the least likely player to thrive if you only study the North American market. Look farther than our shores, to China, however, and you won't be shocked. Note that the Envision, which has been on sale in China for a year and a half, will reach about 200,000 units this year; the entire Buick portfolio in the US only totaled 223,000 cars in 2015. Not only is China Buick's primary market, but what it makes there, like the Envision, is intended for a different sort of buyer. Here, we'd call it a compact crossover. In China the Envision is a relatively large car, and the buyer there is far more likely to use it as a tall limo, or at the very least, as a big-time status statement. That buyer is also very likely to be in his or her mid-30s – the average Buick buyer in the US is getting younger, but, at 58, is hardly a millennial. Still, Americans who buy the Envision will benefit from all of this China focus. Huge effort went into its development since the target competitor in China is the Audi Q5, according to Rick Spina, Executive Chief Engineer for the Envision. Spina explained that Buick went to the trouble and expense of isolating the entire chassis from engine, suspension, and driveline vibration and sound penetration. "If you look at non-luxury models like Ford Escape, Honda CR-V, nothing's isolated, everything is hard-bolted to the body, and so all that vibration goes into the frame." Spina says that even though you'd guess the China-built Envision shares the general parts bin of the Chevy Cruze and Equinox, it's almost entirely unique. "It's kind of an orphan," he says, because GM couldn't afford to invest in the ride tuning Buick had to have to compete with Audi in China for a volume Chevy product, so nothing from Chevy (for now) is on this platform. And although it would have made sense to have Cadillac or GMC share it, Cadillac's XT5 and GMC's Acadia were already on a different development cycle. Besides, he's pretty proud that the Envision was developed strictly for Buick.

China-market Buick Envista rumored possible replacement for the Encore

Buick currently sells four crossovers, the Encore, Encore GX, Envision, and Enclave. That number will soon be whittled to three, the Encore expected to end production after this model year. If speculation provided by GM Authority is correct, there could be changes afoot in the middle of the line in time for the 2024 model year. Buick has said it will maintain four ICE-powered crossovers, so the brand will need something to fill the coming gap. GMA sources suggest the China-market Buick Envista could get the nod. Buick launched the coupe-esque model across the Pacific in August, a relation to the Chevrolet Seeker that appeared on the Chinese market in April. The Envista debuted the brand's latest design language inspired by pure-electric concepts like the Electra-X and WIldcat. Thin, angled headlights frame a wide, low grille, leading back to a roof that slopes into a high back and double spoilers. GM applied to trademark the Envista name in the U.S. in early 2019, then maintained it with extension requests until earlier this year. Then, in September 2022, the automaker abandoned the application, which could bode ill for whatever chance there was, if any. Another snag could be that the Envista is 182.5 inches long, 71.5 inches wide, and 61.6 inches high on a 106.3-inch wheelbase. Various reports have pitched the Envista to fill the (small) space between the Encore GX and the Envision; however, the Envista falls just 0.10 short of the Envision's length, and it's three inches smaller in every other dimension. On the other hand, the Envista is 11.1 inches longer and 0.1 inch wider than the Encore GX, with a wheelbase 4.1 inches longer. That makes a lot of overlap in the dimensional Venn diagram. Were the Envista to come as-is, it wouldn't so much be a replacement for the Encore as be a different kind of compact SUV from the Envision on a more modern platform. Further speculation from "sources familiar with the matter" says a U.S.-market Envista could get the Avenir treatment. Avenir marks the ultimate in Buick luxury, an appellation currently restricted to the Envision and Enclave. According to a separate report, the Encore GX is also headed into the Avenir club with the compact crossover gets refreshed for the 2024 model year. An Encore GX Avenir would adopt some exterior tweaks like 18-inch alloys, and turn a load of optional equipment available for the Encore GX Essence trim into standard equipment. Related video: