2014 Buick Lacrosse Leather on 2040-cars

Auto blog

GM won't really kill off the Chevy Volt and Cadillac CT6, will it?

General Motors is apparently considering killing off six slow-selling models by 2020, according to Reuters. But is that really likely? The news is mentioned in a story where UAW president Dennis Williams notes that slumping US car sales could threaten jobs at low-volume factories. Still, we're skeptical that GM is really serious about killing those cars. Reuters specifically calls out the Buick LaCrosse, Cadillac CT6, Cadillac XTS, Chevrolet Impala, Chevrolet Sonic, and the Chevrolet Volt. Most of these have been redesigned or refreshed within the past few model years. Four - the LaCrosse, Impala, CT6, and Volt - are built in the Hamtramck factory in Detroit. That plant has made only 35,000 cars this year - down 32 percent from 2016. A typical GM plant builds 200,000-300,000 vehicles a year. Of all the cars Williams listed, killing the XTS, Impala, and Sonic make the most sense. They're older and don't sell particularly well. On the other hand, axing the other three seems like an odd move. It would leave Buick and Cadillac without flagship sedans, at least until the rumored Cadillac CT8 arrives. The CT6 was a big investment for GM and backing out after just a few years would be a huge loss. It also uses GM's latest and best materials and technology, making us even more skeptical. The Volt is a hugely important car for Chevrolet, and supplementing it with a crossover makes more sense than replacing it with one. Offering one model with a range of powertrain variants like the Hyundai Ioniq and Toyota Prius might be another route GM could take. All six of these vehicles are sedans, Yes, crossover sales are booming, but there's still a huge market for cars. Backing away from these would be essentially giving up sales to competitors from around the globe. The UAW might simply be publicly pushing GM to move crossover production to Hamtramck to avoid closing the plant and laying off workers. Sales of passenger cars are down across both GM and the industry. Consolidating production in other plants and closing Hamtramck rather than having a single facility focus on sedans might make more sense from a business perspective. GM is also trying to reduce its unsold inventory, meaning current production may be slowed or halted while current cars move into customer hands. There's a lot of politics that goes into building a car. GM wants to do what makes the most sense from a business perspective, while the UAW doesn't workers to lose their jobs when a factory closes.

Junkyard Gem: 1985 Buick Skyhawk Custom Coupe

General Motors began building cars on the compact J Platform in 1981, and J-based machinery stayed in production all the way through the 2005 Chevrolet Cavalier and Pontiac Sunfire. The best-known of the J-cars in North America was always the Cavalier, but The General's Pontiac, Oldsmobile, Buick and even Cadillac divisions each sold their own Js here. The Buick version was the Skyhawk, built for the 1982 through 1989 model years. Here's a sporty '85 Skyhawk coupe, found in a Northern California boneyard recently. The Custom trim level was the cheapest version of the Skyhawk in 1985, and the two door was the most affordable configuration (midgrade Skyhawks were Limiteds and the T-Type was at the top of the Skyhawk pyramid that year). The MSRP on this car started at $7,512 (about $21,220 in inflation-adjusted 2022 dollars), making it the least expensive new Buick offered for sale in the United States in 1985. The Skyhawk name had been used on the Buick version of the Chevrolet Monza during the 1970s. The Chevrolet-badged sibling of this car was much cheaper, with the list price of the base '85 Cavalier coupe set at $6,872 (around $19,410 today). There were cheaper new Chevrolets that year, of course; a new Chevette cost just $5,470, while the Isuzu-built Spectrum was $6,295 and the Suzuki-built Sprint a skinflinty $5,151. The base engine in the Custom and Limited was this 2.0-liter SOHC straight-four rated at 86 horsepower. A turbocharged 1.8-liter version with 150 horses was available for an extra 800 bucks ($2,260 now). A four-on-the-floor manual transmission was standard equipment in the 1985 Skyhawk, but the buyers of most of these cars insisted on automatics. The price for this one was $425 ($1,200 today). A five-speed manual cost just $75 ($210). Velour-ish upholstery in Bordello Red (Buick didn't use that name) was all the rage during the 1980s and well into the 1990s. This car's interior looks pretty nice, considering where it's parked. Community Buick GMC in Iowa is still in business today. The five-digit odometer means we can't know how many miles were on this car at the end. I brought a Chicago-made 1950s Pho-Tak Foldex 30 film camera with me to the junkyard that day, as one does, and I photographed the Skyhawk on Kodak Portra 160 film. The irritatingly perky Skyhawk owners in this TV commercial appear to be about one-third the age of typical mid-1980s Buick shoppers.

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.