2012 Buick Enclave Premium Awd - Brand New Tires! on 2040-cars

Auto blog

Next-generation Buick Enclave spotted with Wildcat looks

The rollout of GM's next-generation three-row large SUVs is well under way with the reveals of the 2024 Chevy Traverse and GMC Acadia. Another vehicle on the platform is also getting a redesign soon, according to these spy photos: the Buick Enclave. It's still going to be big, and it will now receive the same sort of Wildcat concept-inspired styling as smaller Buicks such as the Envista and Encore GX. The Enclave's front is where the Wildcat connection is the most clear. It has the pointy shark nose and wide, frowning grille. It's hard to say whether it will get a mesh grille like some of the production SUVs, or a slatted grille like the concept. High up are slender daytime running lights with the actual illuminating headlights hidden lower in the outboard air intakes. We're not totally sure if this look will work on such a large, tall vehicle, but we'll reserve final judgment when we can see the car with all its paint and trim on display. The sides of the Enclave still have a fair bit of the Coke bottle curves that have appeared on every Enclave, if a bit more toned down. The greenhouse seems to take after the GMC Acadia more than the Traverse, as it seems it has a relatively thin C-pillar. The D-pillar looks quite thick, which will probably be toned down with judicious application of gloss black plastic.  Details of the rear are difficult to make out. It seems to have slim, wide and curvy rear taillights. The rectangular exhaust tips are nicely fitted to the rear bumper. But that's about all that stands out. We're expecting the Enclave to have basically the same powertrain as the GMC Acadia, with the one engine offering being a turbocharged 2.5-liter four-cylinder with 328 horsepower and 326 pound-feet of torque. It should be paired with an eight-speed automatic and either front- or all-wheel drive. Odds are it will not get an off-road variant like the Acadia AT4 or Traverse Z71. But it might get a sportier road-going version that could take advantage of the torque-vectoring dual-clutch rear differential from those aforementioned off-roaders. It should also be revealed sometime next year with deliveries likely in the same year. Related video:

GM recalling 8.4M cars, 8.2M related to ignition problems

General Motors today announced a truly massive recall covering some 8.4 million vehicles in North America. Most significantly, 8.2 million examples of the affected vehicles are being called back due to "unintended ignition key rotation," though GM spokesperson Alan Adler tells Autoblog that this issue is not like the infamous Chevy Cobalt ignition switch fiasco.
For the sake of perspective, translated to US population, this total recall figure would equal a car for each resident of New Hampshire, Rhode Island, Montana, Delaware, South Dakota, Alaska, North Dakota, the District of Columbia, Vermont and Wyoming. Combined. Here's how it all breaks down:
7,610,862 vehicles in North America being recalled for unintended ignition key rotation. 6,805,679 are in the United States.

GM applies to trademark Buick Envision GX

GM Authority found a GM application with the U.S. Patent and Trademark Office to reserve the name Buick Envision GX. We can't be certain, but it seems this all but confirms that the three-row Buick Envision, which debuted a year ago in China as the Envision Plus (pictured), will sell here as the Envision GX. Doing so would reinforce the naming convention established in the U.S. with the Encore and slightly larger Encore GX. Adding a third row to the compact two-row Envision extends three of of four dimensions. According to specs the Chinese transport ministry put online last year, the three-row Envision will be 190.7 inches long on a 111.5-inch wheelbase, increases of 8.2 and 2.1 inches, respectively. Height grows by 2.7 inches as well, only the 74.1-inch width holding steady.   That length has been utilized to make life easier for second- and third-row passengers. The Envision Plus in China comes with 2+3+2 seating, the second-row bench able to slide 9.8 inches. Behind that, cargo volume with the second and third rows stowed climbs from 52.7 cubic feet to 58 cubic feet. The sole engine will be the current Envision's 2.0-liter four-cylinder, making 228 horsepower and 258 pound-feet of torque, sent to the wheels through a nine-speed automatic. Power gets sent to the front wheels as standard, and all-wheel drive will be an option.  On top of the extended rear overhang on the seven-seater, GM designers slipped in a few cosmetic changes to set it apart from the five-seater. A new horizontal trim piece connects the headlights, the lower bumper getting a pair of larger, reshaped intakes. A complementary horizontal slash connects slimmer taillights, the license plate surround squared off instead of trapezoid-shaped.  Related video: