2012 Buick Enclave Awd Premium Pkg!!! on 2040-cars

Auto blog

GM follows up Lambda CUV stop-sale with tire recall

In late January, General Motors announced a stop-sale for about 6,281 examples of the 2015 Chevrolet Traverse, GMC Acadia and Buick Enclave because of the possibility for the treads cracking on their 18-inch Goodyear Fortera HL tires. At the time, GM said that this would also eventually lead to a safety campaign to repair the problem, and the National Highway Traffic Safety Administration has just published those details. GM's recall covers 5,876 of the three Lambda platform crossovers to replace their tires. According to NHTSA, if the treads crack, there could be a loss of pressure and possible failure. Goodyear already announced its own recall of the tires after internal testing found small tread cracks. The company did not believe this was safety issue, but the problem did put the rubber out of compliance with federal laws. The business's safety campaign covered an estimated 48,512 tires. Of those, around 32,000 were reportedly made for GM to either be fitted to vehicles or sold as replacements. The remainder went to the aftermarket. Goodyear's portion of the recall is expected to begin around February 20. RECALL Subject : Tire Tread Cracking/FMVSS 110 Report Receipt Date: JAN 28, 2015 NHTSA Campaign Number: 15V044000 Component(s): TIRES Potential Number of Units Affected: 5,876 All Products Associated with this Recall Vehicle Make Model Model Year(s) BUICK ENCLAVE 2015 CHEVROLET TRAVERSE 2015 GMC ACADIA 2015 Details Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2015 Buick Enclave vehicles manufactured December 9, 2014, to January 14, 2015, 2015 Chevrolet Traverse vehicles manufactured December 9, 2014, to January 20, 2015, and 2015 GMC Acadia vehicles manufactured December 9, 2014, to January 16, 2015, and all equipped with Goodyear P255/65R18 Fortera HL tires. These vehicles are equipped with tires that may experience tread cracking. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 110, "Tire Selection and Rims and Motor Home/Recreation Vehicle Trailer Load Carrying Capacity Information for Motor Vehicles with a GVWR of 4,536 kilograms (10,000 pounds) or Less." CONSEQUENCE: If the tire treads crack, a loss of tire pressure and possible tire failure may result, increasing the risk of a crash. REMEDY: GM will notify owners, and dealers will replace the tires that were manufactured within a specific date range, free of charge.

Junkyard Gem: 1962 Buick LeSabre 2-Door Sport Coupe

American car shoppers looking for a full-sized hardtop coupe in 1962 couldn't go wrong with the offerings from The General. Chevrolet would sell you a snazzy new Bel Air sport coupe for just $2,561 (about $23,800 today), but those Joneses next door wouldn't have felt properly shamed if you put a new proletariat-grade Chevy in your driveway. No, to really stand tall during the era of Alfred Sloan's Ladder of Success, you had to go higher up on the GM food chain. For the B-platform full-sized cars of 1962, that meant the Pontiac Catalina/Bonneville beat the Chevy, the Oldsmobile 88 was the next step up the ladder, and at the very top was the Buick: the hot-rod Invicta and its swanky LeSabre sibling. To go beyond that, you had to move up to a C-platform Buick Electra or Cadillac. Today's Junkyard Gem is a once-luxurious '62 LeSabre, now much-faded in a northeastern Colorado boneyard. The reason GM shoppers got so bent out of shape about the "Chevymobile" episodes of the late 1970s, in which some GM cars received engines made by "lesser" GM divisions, was that each division had its own family of V8 engines during the 1950s and 1960s and they weren't supposed to be mingled. The '62 LeSabre got a 401-cubic-inch (6.5-liter) Nailhead engine (so called because the valves were unusually small), rated at 265, 280, or 325 (depending on what kind of compression ratio and carburetion you wanted). That's not crazy horses for a big-displacement, two-ton luxury coupe of its era, but the small valves allowed for combustion chambers optimized for one thing: low-rpm torque. This 401 has the two-barrel carburetor, so it made either 412 or 425 pound-feet of torque. That's just a bit less than the mighty Cadillac's engine that year, and definitely sufficient to get this car moving very quickly. You had to pay a fat premium on the Chevrolet, Pontiac, and Oldsmobile B-bodies to get an automatic transmission (a three-speed column-shift manual was base equipment in those cars), but a Turbine-Drive (formerly known as the Dyna-Flow) automatic was standard issue on the 1962 LeSabre. This was an interesting transmission design that traced its origins back to the 1942 M18 Hellcat Tank Destroyer and used torque-converter multiplication to provide a CVT-like experience with no perceptible shifts (the driver could select a separate low gearset manually, so the shifter looks just like the one on the true two-speed Powerglide transmission).

Buick Enspire spied for the first time, loses concept's electric powertrain

About a year ago, Buick showed a high-performance electric crossover with wide, aggressive, curvy lines that was called the Buick Enspire. Now we have our first look at the production version. While it does seem to be styled like the crossover, it also seems to have lost its electric powertrain in favor of internal combustion. At the front of the crossover, we can clearly see it has the skinny, scowling headlights of the concept sitting high on the front fascia and flush with the hood. The main grille looks like it may be smaller, but it could also just be that the actual open section of the grille doesn't fill up the grille area of the fascia. In profile, the crossover has an attractive long nose, low roof and rising belt line. The rear shows the most change, as the rear pillars are much thicker, and the taillights don't appear to span the full width of the crossover. It's in the rear that we can also see the evidence that the Buick Enspire will actually be gasoline powered. Looking very closely under the rear bumper cover, we can see two exhaust tips turned to face the ground. Based on the size of the crossover, and the fact a Cadillac XT4 was being driven along with the prototype, the Enspire is probably using the XT4's platform, as well as its mechanical bits. That means it probably has a turbocharged 2.0-liter four-cylinder making 237 horsepower and 258 pound-feet of torque. Power will also probably go through a nine-speed automatic to either the front wheels or all four. This prototype looks to be pretty far along, so we'll probably see the production version in about a year. Considering the Enspire's size and likely powertrain, it may even replace the similar Buick Envision. And since the Envision is Buick's worst selling crossover (unless you count the Regal TourX as one), it would be ripe for replacement.