Jet Black 6 Speed Manual Trans Premium Pkg Only 10,528 Miles Perfect Like New on 2040-cars

Auto blog

BMW to change model designations, further yet from actual displacement?

Once upon a time, you could look at the back of a trunk lid of a BMW and come up with a pretty fair idea of what sat under its hood. For example, a 320i was a 3 Series with a fuel-injected, 2.0-liter engine, a 328i was a 3 Series with a fuel-injected, 2.8-liter engine and a 328Ci was a two-door 3 Series with the same engine. Those were good days.
Today, though, that simplicity is dead and gone. A 328i now has a 2.0-liter engine, just like the 320i, while the simple "C" designation that was affixed to two-door models has been replaced with a "4," so we have a 428i and a 435i. It gets worse, though. A 550i uses a 4.4-liter, twin-turbocharged V8 (it should be a 544ti, although we'd be willing to hear an argument for "tti") and a 740i uses a 3.0-liter, turbocharged six-cylinder, which is the same engine found in a 535i. It's madness.
And, well, it's about to get madder, if a post on a BMW enthusiast forum is to be believed. According to f30post.com, we could see a shakeup in at least the 3 and 4 Series nomenclature, thanks to an impending refresh that will see the addition of new, turbocharged four- and six-cylinder engines, codenamed B48 and B58, respectively.

BMW previews new M6 GT3 racing prototype [UPDATE]

UPDATE: A previous version of this post specified the incorrect weight target for the M6 GT3. The text below has been updated with the correct information. BMW may not compete at the top level at Le Mans or in the World Rally Championship, it may have withdrawn from Formula One and shuttered the Formula BMW series, but it's not without its racing programs. Aside from the Minis that dominate the Dakar Rally, BMW fields the M4 in DTM, the M235i Racing in the BMW Sports Trophy and the Z4 in GT3 competitions around the world. But now it's preparing to launch a new GT3 racer based on the M6. Currently undergoing development, BMW has presented its new M6 GT3 prototype at its factory in Dingolfing, Germany. Based on the road-going M6 coupe, the GT3 retains its 4.4-liter twin-turbo V8 engine with dry-sump lubrication, producing over 500 horsepower – which is actually less than the road-going model you can buy, but has to be restricted to meet FIA certification. At less than 3,000 pounds, it is a fair bit lighter than the production version, and promises to deliver blistering performance figures to whichever privateer teams buy one to enter in racing series around the world. The M6 GT3 is slated to hit the circuits next year, when it will join the lineup alongside the M6 coupe, M6 convertible and M6 Gran Coupe, to say nothing of the M6 safety car used in MotoGP. In a related development, BMW Blog reports that the Bavarian automaker is probing potential interest in bringing the M235i Racing to North America. The entry-level model in the BMW Motorsports range, the M235i Racing sells in Europe for the equivalent of $68,000. The next milestone: the BMW M6 GT3 is rolled out at the BMW premises in Dingolfing. 05.02.2015 Munich (DE), 5th February 2015. BMW's new figurehead for the GT racing scene has been given its first run: last Saturday, the test track on the premises of the BMW factory in Dingolfing (DE) provided the stage for the roll-out of the BMW M6 GT3, with which BMW teams will compete in national and international series, as well as at iconic endurance races, from 2016 onwards. The car left the garage for the first time at precisely 14:00 with Jorg Muller (DE) at the wheel. This gave the BMW works driver the honour of creating the next milestone in the development of the BMW M6 GT3. "This is a big moment for everyone who has worked so intensely and passionately on the development of the BMW M6 GT3 in recent months," said BMW Motorsport Director Jens Marquardt.

Watch Atieva's electric van outrun a BMW i8 and Dodge Viper

A little while back, automotive startup Atieva drag raced its electric van, called Edna, against a Tesla Model S and a Ferrari California in order to compare its performance against known and revered mechanical athletes. Again, the Silicon Valley-based company is putting its prototype up against electrified and conventionally powered performance vehicles on the drag strip. Last time around, Edna, the Mercedes-Benz Vito van equipped with a 900-horsepower, all-wheel-drive powertrain, bested both of its foes. In that showcase, Edna was hitting 60 mph in a little over three seconds. Comparatively, BMW lists the i8's 0-60 time at 4.2 seconds, though Road & Track clocked it at 3.8 seconds, with a quarter-mile time of 12.3 seconds. The Viper does 0-60 in 3.4 seconds. Before you even watch the video above, you can imagine how it will end, as the retuned Atieva Edna rips 0-60 mph in 2.94 seconds. Atieva clocked the quarter mile at 11.3 seconds at 117 mph. It's worth noting that driver skill can have a lot to do with a car's straight-line performance. We've witnessed Viper's elapsing the quarter mile in well under 12 seconds, which means it should be quicker in this test than the i8, if not the Edna. Still, the performance showcased in the video is exceptional. To improve Edna's stats, Atieva says it has used testing data to fine tune its AC induction motors at higher speeds once it got low-speed performance locked in. After testing in the hot California sun, including the race you see above, Atieva drove Edna 90 miles home with range to spare. As for production plans, Atieva will put this powertrain into a sedan slated for sale in 2018. In the meantime, the company will keep testing and tuning its working prototype, and has even invited the public to put their cars up against Edna in future sessions. Related Video: Related Gallery 2015 BMW i8 in Petoskey, MI News Source: Atieva, YouTube: Atieva via Electrek Green Motorsports BMW Dodge Automakers Electric Future Vehicles Videos drag race atieva