2022 Bmw Z4 Sdrivem40i Roadster W/premium And Driving Assistan on 2040-cars

Auto blog

BMW i3 gets official worldwide

Even though we recently drove a near-production version of the BMW i3, the car still wore light exterior and interior camouflage. Today, BMW took off that little bit of camo and made a big announcement: The i3 will go on sale in the US for $41,350 in the second quarter of 2014. That does not include any state or federal incentives that could lower the price or the $925 destination fee. The i3 will debut with three trim levels, which BMW is referring to as Worlds: Mega (standard in the US), Giga and Tera.
The BMW i3 is chock-full of new technology afforded by its design as an EV from the start of development, which has resulted in a vehicle layout unique to the i3. BMW has named it LifeDrive architecture, and it features the Life Module and the Drive Module. The Life Module is the i3's pillar-less passenger cell, which is the first mass-produced monocoque made of carbon fiber reinforced plastic (CFRP). The tougher-than-steel material is also 30-percent lighter than aluminum, which contributes to the i3's relatively light weight of 2,700 pounds (preliminary US figure) and, in turn, increases its energy efficiency. Expect more of this technology to find its way into future BMWs.
The Drive Module, a 100-percent aluminum chassis mounted under the Life Module, houses everything that makes the i3 go. It includes the 22-kilowatt, 450-pound lithium ion battery mounted as centrally as possible, and provides power to a rear-mounted electric motor that turns the rear wheels. With 170 horsepower and 184 pound-feet of torque from zero rpm, the single-gear i3 can accelerate from 0-30 miles per hour in 3.5 seconds and 0-60 mph in about 7.0 seconds, but it has a top speed of only 93 mph. BMW says the i3 has a real-world EV range of 80-100 miles, and the standard charger can fill the battery in three hours. Opt for the SAE DC Combo Fast Charger and 30 minutes is all it takes for a full charge; 20 minutes will bump the battery to 80 percent. For customers who have range anxiety, BMW gives them the option to install a 34-hp, 650cc two-cylinder generator as a range extender for the electric drive system.

New BMW i3-like Visio.M EV concept uses lightweight resin

It's not a new version of the BMW i3, but an updated version of a lightweight concept car from SABIC, BMW, the Technical University of Munich, Daimler and others does bear a certain resemblance to the well-designed plug-in city car. From the black "glass" in the hatch to the angled line tail lights to the up-and-down window line, you can see a sort of family resemblance (see an i3 comparison photo here). And, of course, they both have an electric powertrain. But the changes made to the new lightweight urban electric concept vehicle is more of an exercise in what's possible rather than a way to evolve the i3 and i8 into a broader i family of vehicles. Even so, what we see here is interesting, since SABIC found all sorts of new ways to take weight out of the car as part of the Visio.M (Visionary Mobility) project, which was first announced in 2012. Let's start with the window material, which as you might guess from the quotation marks above, is not made of glass but is instead SABIC's Lexan polycarbonate (PC) resin plastic. The lower weight (the PC helps shed about 29 pounds) adds two miles of range while the PC resin has better thermal conductivity compared to glass and so does even more because the HVAC system can be more efficient. According to SABIC's computational fluid dynamics analysis, an extra 9-10 miles of range, in fact. Without the battery, this concept weighs just 992 pounds. Remember, BMW already made a lot of weight-reduction measures in the i3 thanks to carbon fiber reinforced plastic, so to make the "glass" lighter would only help boost efficiencies on a production vehicle that uses a resin like this. Read more below. SABIC's LEXAN™ resin delivers weight savings and thermal efficiency for new ultra-lightweight electric car concept developed by BMW-led Visio.M Consortium Munich, October 20, 2014 Today, at the Technical University of Munich (TUM), BMW, Daimler, TUM scientists and a consortium of industry participants showcased a lightweight urban electric concept vehicle with various advances, including an all-plastic design of the car's windows. The windows are made of LEXAN resin, a polycarbonate (PC) material, and coating technologies from SABIC, a leading developer of PC glazing for automotive windows and many other thermoplastic solutions for the automotive industry.

BMW to pay $1.6M, rehire workers in discrimination settlement

A BMW subsidiary is on the hook for $1.6 million and must rehire workers as part of a settlement for a race discrimination lawsuit with the US Equal Employment Opportunity Commission. A change in BMW Manufacturing's criminal background check policy at the Spartanburg, SC, factory disproportionately affected African American workers, according to the EEOC, and it cost many people their jobs. The automaker has since changed the policy. According to Automotive News, the suit stemmed from BMW switching logistics contractors at the plant in 2008. As a result, 645 existing workers had to submit revised criminal background checks to keep their jobs. About 100 people didn't meet the new guidelines, according to the EEOC, and they lost their jobs. Around 80 percent of those affected were African American. According to the government agency's complaint, the altered procedures only took into account the category of a crime, not factors like when it occurred or whether the infraction was a misdemeanor or felony. With the settlement accepted by US District Court, BMW must offer work to the affected employees in this case and as many as 90 African American applicants that the contractor didn't hire because of the rules. The automaker also must offer training in the proper manner for criminal background checks. While there's nothing inherently wrong with investigating workers, "when a criminal background screen results in the disproportionate exclusion of African-Americans from job opportunities, the employer must evaluate whether the policy is job related and consistent with a business necessity," P. David Lopez, the EEOC's General Counsel, said in the agency's release, which you can read below. BMW to Pay $1.6 Million and Offer Jobs to Settle Federal Race Discrimination Lawsuit Company's Criminal Background Policy Disproportionately Affected African-American Logistics Workers, EEOC Charged GREENVILLE, S.C. - The U.S. District Court for the District of South Carolina today entered a consent decree ordering BMW Manufacturing Co., LLC (BMW) to pay $1.6 million and provide job opportunities to alleged victims of race discrimination as part of the resolution of a lawsuit filed by the U.S. Equal Employment Opportunity Commission (EEOC).